Publication in Scopus

2015:

  1. Mr.M.Sasi Kumar , Mr.R.Santhanakrishnan, M. Makesh Kumar, Mr.S.Karthickram,”Numerical simulation over a typical launch vehicle with protrusion”,ARPN journal of Engineering and applied sciences, ISSN: 18196608, ,2015,vol.10,pp.5649.

2016:

  1. R. Senthil Kumar, M. Thiagarajan, and K. Chandrasekaran, “Investigation of Mechanical and Wear Properties of LM24/Silicate/Fly Ash Hybrid Composite Using Vortex Technique,” Advances in Materials Science and Engineering , 2016, vol. 2016, Article ID 6728237,pp.8.

2018

  1. Mayakrishnan, J., Nandagopal, S., Sathiyaseelan, V., and Raja, S., “Canola Oil as a Fuel for Compression Ignition Engine – An Experimental Investigation,” SAE Technical Paper 2018-01-0910, 2018.
  2. Shanmugaraja, M. and Tharoon, T. ‘Application of Taguchi and RSM techniques for
    optimising the parameters of pressure die casting process’, Int. J. Productivity
    and Quality Management, , 2018, Vol. 25, No. 3, pp.387–416.

2018:

  1. Kavitha N.S., ArunKumar P., Shanthini J,”Design and fabrication of an Assistive system to translocate patients from bed to wheelchairs “, ICSNS 2018,pp1 – 5.
  2. Arun Kumar P, Shanthini J, Karthik S, “Design and Fabrication of Pneumatically Operated Wheelchair convertible Ambulated Stretcher “, ICSNS 2018,pp1 – 4.

2018

1.K. Ramadevi and S. Deepashri”Solid waste management using GGBS(Ground Granulated Blastfurnace slag) in concrete as fine aggregate”Ecology, Environment and Conservation Paper,March 2018.,Vol 24,pp46-49.

2.K. Ramadevi and S. Deepashri”An experimental study on ecofriendly hybrid ferrocement slabs using self compacting microconcrete made with silica fume”Ecology, Environment and Conservation Paper,March 2018,Vol 24, no. 1, pp46-49.

2017

1.S.Deepa Shri,”Experimental study on the effect of partial replacement of cement by using glass powder and flyash in concrete” Pakistan journal of                          Biotechnology,ISSN:1812-1837,July 2017,Vol.14,no. 3, pp507-510.

2.”An experimental study on combined effects of glass fiber and Metakaolin on the rheological, mechanical, and durability properties of self-compacting concrete” Applied Clay Science,July 2017 ,vol.147,pp:123-127.

2016

1.Prince Arulraj, G.,”Need of efficient hybrid base isolation technology from current practice”,IOSR Journal of Civil Engineering (IOSR-JMCE),Feb 2016,Vol 11,no.1,PP30-35.

2.Prince Arulraj, G.,”Influence of mineral admixtures on stress strain behaviour of self compacting concrete under elevated temperature”,Indian Journal of Science and Technology,Feb 2016,Vol 9,no.3,PP1-8.

3.Athi Gajendran, R.Anuradha and G.S.Venkatasubramani “Strength Study on Eco Friendly High Performance Concrete by Replacing the Cement by Flyash, Silica Fume and metakaolin” Asian journal of microbial.biotechnology.environmental science, ISSN:0972-3005,Jan 2016,Vol 18,no.2,PP 219-221.

4.D.Anitha Selvasofia , G. Prince Arulraj , “Accident & Traffic Anaklysis using GIS” Bio Medical Research,2016,ISSN 0970-938X,PP 103-106.

5.Kavitha O.R,Shanthi V.M,Prince Arulraj.G & Sivakumar V.R.,”Microstructural study on eco-friendly and durable self compacting concrete blended with Metakolin”, Applied Clay Science,DOI:10.1010/j.clay.2016.02.011,2016,Vol.124,pp:143-149.

6.Prince Arulraj, G.,”Influence of mineral admixtures on Mechanical properties of self compacting concrete under elevated temperature”,Fire and materials An International Journal, Feb 2016,vol 40, no.7,pp12-15.

7.Prince Arulraj, G.,”Contamination analysis of ground water in Coimbatore district, India: a statistical approach”,Environmental Earth Sciences , Nov 2016,vol 2, no.2, pp1-12.

2015

1.Prince Arulraj, G.,”Experimental investigation of high performance concrete with partial replacement of fine aggregate by M-Sand and cement with fly ash”,International Journal Engineering Technology and Sciences, Jan 2015,vol2, no.2,pp12-15.

2.Krishnapriya S, Prince Arulraj, G,”Surface treatment of concrete by using bacterial calcite precipitation”,International Journal of Applied Engineering Research, Jan 2015,vol.10,no.11,pp:28137-28143 ·

3. Deepak S,”Experimental Studies on replacing potable water with rice mill effluent in concrete”,Asian Journal of Microbiology, Biotechnology and Environmental Sciences,2015,vol. 17,no.1,pp:159-161 ·

4.Krishnapriya.S, Venkatesh Babu. DL & Prince Arulraj. G, “Isolation and identification of bacteria to improve the strength of concrete”, Microbiological Research,DOI:10.1016/j.micres.2015.03.009, 2015, Vol. 174, pp. 48-55.

5.T.G.Usha, R.Anuradha and G.S.Venkatasubramani, “Reduction Of Green House Gases Emission In Self Compacting Geopolymer Concrete Using Sustainable Construction Materials”, Nature Environment and Pollution Technology, ISSN: 0971-4871, 2015, Vol.14,No.2, pp.451-454.

6.Kavitha, O.R, Shanthi, V.M, Prince Arulraj, G & Sivakumar, P, “Fresh micro-and macrolevel studies of metakaolin blended self-compacting concrete”, Applied Clay Science, DOI:10.1016/j.clay.2015.06.024, 2015, vol.114, pp. 370-374.

7.Anuradha, R,”Mechanical properties on high performance concrete by replacing the cement by flyash, silica fume and metakaolin”,International Journal of Applied Engineering Research,Jan 2015, vol.10,no.3,pp:5881-5886 ·

8.Anuradha, R,”Flexural behavior of self compacting geopolymer concrete using GGBFS with various replacements of R-sand and Msand”,ARPN Journal of Engineering and Applied Sciences,Jan 2015,vol.10,no.14,pp5881-5886.

9.Anuradha, R,”Studies on relationship between compressive and splitting tensile strength of high performance concrete”,ARPN Journal of Engineering and Applied Sciences,Jan 2015,vol10,no.14,pp6157-6166.

2014

1.Anitha Selva Sofia,”Traffic impact assessment of mrts in a Gis platform”International Journal of Applied Engineering Research,Jan 2014 ,vol 9,no.                       22,pp5513-5517.

2.Anitha Selva Sofia,S.D. Suganya, S.Saraswathy, R., “Change detection mapping using remote sensing and GIS for Coimbatore district”International Journal of Applied Engineering Research, ISSN 0973-456,2 Vol. 9 No.22 ,2014, pp. 5506-5512.

2013

1.N.Anand and  G. Prince Arulraj  , “Effect of grade of concrete on the Performance of self compacting Concrete beams subjected to Elevated Temperatures”, Journal of Springer on Fire Technology, DOI: 10.1007/s10694-013-0345-6, May 2013,vol.50, pp1269-1284.

2011

1.N. Anand and G.Prince Arul raj, “Experimental studies on Behavior of normal strength concrete under elevated temperature.” International Journal of Applied Engineering Research ,ISSN: 0973-4562, 2011, Vol 6, No. 11,  pp 1395-1404.

2019

  • Karthik, ” A Hybrid Filtering Approach for MRI image with Multiresolution”, The Journal of Networks, Software Tools and Applications, Cluster Computing, Springer, 2019

2018

  • Mr.C.B.Sivaparthipan, Dr.N.Karthikeyan, Dr.S.Karthik “Designing Statistical assessment healthcare information system for diabetes analysis using big data”, Multimedia Tools and Applications, Springer, 2018.
  • Bhavadharini, R.M., Karthik, S.,Karthikeyan, N.,Paul. A, “Wireless Networking Performance in IoT Using Adaptive Contention Window”, Wireless Communications and Mobile Computing, 2018.
  • BalaAnand, M.,Karthikeyan, N.,Karthik, S.”Designing a Framework for Communal Software: Based on the Assessment Using Relation Modelling”, International journal of Parallel Programming, 2018.
  • Sangeetha “An Optimal Criterion Feature Selection method for prediction and effective analysis of heart disease”, The Journal of Networks, Software Tools and Applications, Cluster Computing, Springer, 2018.
  • Santhosh Kumar, S.Karthik, V.P.Arunachalam “Upkeeping Secrecy in information Extraction Using ‘k’ division graph based Postulates”, The Journal of Networks, Software Tools and Applications, Cluster Computing, Springer, 2018.
  • Karthik, R.M.Bhavadharini, “TCACWCA: transmission and collusion aware Clustering with enhanced weight clustering algorithm for mobile adhoc networks”, The Journal of Networks, Software Tools and Applications, Cluster Computing, Springer, 2018.
  • Karthik, ” Hybrid Metaheuristic Algorithm for improving the Efficiency of Data Clustering”, The Journal of Networks, Software Tools and Applications, Cluster ComputingSpringer, 2018.
  • Karthik, ” A Hybrid Filtering Approach for MRI image with Multiresolution”, The Journal of Networks, Software Tools and Applications, Cluster ComputingSpringer, 2018.
  • R.Sabitha , Dr.S.Karthik, “Power aware Scheduling using gravitational search algorithm for life time enhancement of wireless sensor network”, Journal of Computational and Theoretical Nanosciences, 2018, Vol.15, No.4, pp 1163-1169.
  • Chandru Vignesh, S.Karthik “Predicting the position of adjacent nodes with QoS in mobile Adhoc networks”, Multimedia Tools and Applications, Springer, 2018.
  • Khan, M., Han, K.Karthik, S, “Designing Smart Control SystemsBased on Internet of Things and Big Data Analytics” ,Wireless Personal Communications,2018,99, No.4, pp. 1683-1697 .
  • Thirukrishna,J T.Arunachalam, V.P..,Karthik, S., “Revamp energy efficiency in Homogeneous Wireless Sensor Networks using Optimized Radio Energy Algorithm (OREA) and Power- Aware Distance Source Routing protocol “, Future Generation Computer Systems, 2018, pp 331-339.

2017:

  • J.Alfred Daniel,Karthi Subburathinam,Anand Paul,Newlin Rajkumar,Seungmin Rho, ”Big Autonomous Vehicular data Classifications: Towards procuring intelligence in ITS” Vehicular Communications, 2017, Vol 9, pp 306-312.
  • Aruna,D.Bhanu,S.Karthik “An Improved load balanced metaheuristic Scheduling in Cloud”, The Journal of Networks, Software Tools and Applications, Cluster Computing, Springer, 2017.
  • S, Shanthini, J.,Karthik, S.”Automatic brain stroke segmentation using probabilistic patch based approach and convolution neural network”, Journal of Computational and Theoretical Nanoscience , 2017, Vol.14, No.1L, pp. 5515-5524.
  • Arun Chakravarthy,R., Palaniswami, S.,Sabitha, R.”Cluster header revolving technique to prolong network lifespan in wireless sensor network”, journal of Computational and Theoretical Nanoscience, 2017,14, No.12, pp. 5863-5871.

2016:

  • Bhavadharini, R.M.,Karthik, S.,Karthikeyan, N.”Cross-layer congestion control with efficient bandwidth allocation and dynamic window adaptation in mobile ad hoc network “, Asian journal of Information Technology, 2016, Vol.1S, No.3, pp. 455-466.
  • D.Prabakar, Dr.S.Karthik ,”Modified Gossiping Routing Protocol for Energy Conservation in Wireless Sensor Networks”, Asian Journal of Information Technology,2016, Vol.15, No.3 , pp 467-471.
  • R.KamalRaj, ”Test Case Classification Using Tuned Fuzzy Logic with Test Case Reusability for Test Suite Reduction”, Asian Journal of Information Technology, 2016, Vol.15, No.9 , pp 1437-1442.
  • S.Raja Ranganathan,Dr.S.Karthik ,”An Attempt for Content Based Matching on Semantic Web Using Relation Map Based Algorithmic Approaches”, Asian Journal of Information Technology, 2016, Vol.15, No.4, pp 840-845.
  • K.Maheswari,”Auto Bug Triager For Assisting Manual Bug Triage”, Asian Journal of Information Technology, 2016, Vol.15, No.8, pp 1334-1339.
  • S.Kannan, Dr.S.Karthik, Dr.V.P.Arunachalam, ”A Dynamic Probabilistic Broad Broadcasting Scheme for MANETs”, The Scientific World Journal, Hindawi Publishing corporation, 2016, Vol. 16, pp 1-8.
  • R.Roopa Chandrika, Dr.S.Karthik, ”Texture Classification Using Fuzzy Cognitive Maps for Grading Breast Tumor”, Asian Journal of Information Technology,2016, Vol.15, No.5, pp 989-995.
  • M.Kavitha, Dr.S.Karthik ”An Efficient Selfish Node Detection and Data Replication Technique for Distributed Database in MANET ”, Asian Journal of Information Technology, 2016, Vol.15, No.14, pp 2411-2419.
  • R.Roopa Chandrika,Dr.S.Karthik, ”Texture Classification Using Fuzzy Cognitive Maps for Grading Breast Tumor”, Asian Journal of Information Technology, 2016, Vol.15, No. 5, ISSN ,pp 989-995.
  • S.Karthik, ”Local Search Based Grid Scheduling Model for Independent Grid Tasks”, Asian Journal of Information Technology, 2016, Vol.15, No.2 , pp 365-371.
  • K.Sangeetha,”A Supervised Hidden Markov Model with Guassian Output Distribution for Unstructured Medical Data Classification”, Journal of Computational and Theoretical Nanoscience, 2016, Vol.13, No.8, pp 1-7.
  • Sabitha, R., Karthik,S , Shanthini. J “Breast cancer detection using enhanced descriptive approach”, Journal o£ Medical Imaging and Health Informatics 2016,Vol.6, No.8, pp. 1887-1892.

2015:

  • Amudha, P. Karthik, Sivakumari, S.”Swarm based classifier model using ensemble feature ranking methods”, ARPN journal of Engineering and Applied Sciences, 2015,10, No.18, pp. 8052-8059.
  • Karthik “A Hybrid Swarm Intelligence Algorithm for Intrusion Detection Using Significant Features”, The Scientific World Journal Volume 2015, Hindawi Publishing corporation,2015, pp.1-15.
  • Amudha, P.,Karthik, S.,Sivakumari, S. “Intrusion Detection Using Modified Artificial Bee Colony with  Reduced Features”, International journal of Applied Engineering Research, 2015, Vol.10, No.8, pp.2ll2S-21138.
  • , Karthik, S., “Correlation based approach with a sliding window model to detect and mitigate DDoS attacks”, Journal of Computer Science ,2015,Vol.11, No.2, pp. 438-442.
  • Shaheen, H., Karthik, S “A efficient classifier decision tree for active context source discover on mobile pervasive environment”, International journal of Applied Engineering Research, 2015, Vol.10, No.7, pp. 18271-18284.
  • S.Karthik, ”Artificial Bee Colony Optimization for Feature Selection With Furia in Opinion Mining”, Journal of Pure and Applied Microbiology, Special issue on recent Research challenges in Bio-Medical Applications, 2015,Vol.9, pp 17-23.
  • T.Kalaikumaran, Dr.S.Karthik “ Hybrid Scheduling Model for Independent Grid Tasks” ,The Scientific World Journal, Hindawi Publication, 2015, Vol.2015, pp 1-9.
  • Priya, R.S.,Prabakar, D.,Karthik, S.”Enhanced information retrieval model using context based querying”, Journal of Chemical and Pharmaceutical Sciences, 2015, pp. 162-166.

2014:

  • Kalaikumaran, T., Karthikeyan, Karthik,S.,Srihari, K.”A category based search system to optimize query retrieval time, total number of good pages visited and category based search”, Information (Japan) , 2014,17, No.6 A, pp. 2217-2224.
  • Karthik, G.M.,Karthik, S.”Frequent correlated periodic pattern mining for large volume set using time series data”, Journal of Computer Science , 2014,Vol.10, No.10, pp. 2105-2116.
  • Sundaramoorthy, P.,Selvam, M., Karthik, S., Srihari, K.”Fuzzy inference optimization algorithm for resource scheduling in cloud environment”,Information (Japan) , 2014, Vol.17, No.6 B, pp. 2873-2880.
  • A “A Fuzzy Approach For Representative Node Selection In Cross Layer TCP” Journal of Theoretical and Applied Information Technology, 2014, Vol. 64, No.1.
  • S” A F fluent Context Aware Systems Based on the User Behavior in Mobile Pervasive Computing Environment” Journal of Theoretical and Applied Information Technology, 2014, Vol. 67 ,No.1.
  • Bharathiraja, R., Karthik, S., Arunachalam, V.P. “Channel based adaptive rate control technique for MANET”, Research Journal of Applied Sciences, Engineering and Technology, 2014,7, No 16, pp. 3266-3272.
  • Sumathi, T., Karthik, S., Marikkannan, M. “Artificial bee colony optimization for feature selection in opinion mining”, Journal of Theoretical and Applied Information Technology , 2014,Vol.66, No.1, pp. 368-379.
  • Narayanan, G.G.,Raja Ranganathan,S,Karthik, S. “An efficient user revocation and encryption methods for secure multi-owner data sharing to dynamic groups in the cloud”, International Review on Computers and Software, ,2014, 9, No.5, pp. 825-831.
  • Dhivya, Dr.S.Karthik, Dr.T.KalaiKumaran “MTOM Technique for Secure Data Transmission over CMEA Protocol in MANET”, International Journal of Applied Engineering Research, 2014, Vol.9, No.21, pp 4809-4812.
  • Karthikeyan, N.,Periyakaruppan, K., Karthik, S., Srihari, K.”Flooding reduced-destination sequenced distance vector routing protocol”, Information (Japan) 2014, Vol.17, No.8, pp.3901-3908.
  • Raja Ranganathan, Dr.S.Karthik, ”Improving the performance for Relation Based Search Engines in Semantic Web Using Onto Search”, International Information Institute, 2014, Vol.17, No.9(B), pp.2873-2880.

2013

  • Srihari K,Karthik, S “Optimizing ontology and semantic search using genetic and greedy algorithms approach”,Information (Japan), 2013, Vol. 16 , No. 11, pp. 8021-8026.
  • Bharathiraja, R., Karthik, S.,Arunachalam, V.P.”Adaptive power control technique for improving throughput in MANETs“, Asian Journal of Information Technology, 2013, Vol.12, No. 8, pp. 257-265.
  • Bharathiraja, R., Karthik, S., Arunachalam, V.P.”Smart transmission power adjustment routing based on connectivity and coverage in mobile adhoc networks”, Journal of Theoretical and Applied Information Technology, 2013, Vol.3, No. 2, pp. 163-170.
  • Srihari, K., Arunachalam, V.P., Karthik, S.”Optimizing ontology and semantic search using genetic and greedy algorithms approach”, Life Science Journal, 2013, Vol. 10, No. 1, pp. 2914-2921.
  • Gopi Saminathan, A., Karthik, S.”A secure and fault-tolerant routing protocol based on GDDA and HLUA “, Asian Journal of Information Technology, 2013, Vol.12,no. 7,pp. 208-216.

2011

  • Kannan, S., Karthik, S., Arunachalam,V.P “An enhanced packet retransmission method for improving TCP-aware source routing in mobile ad-hoc network ”Asian Journal of Information Technology ,2011,Vol.10,no. 1, pp. 20-25.
  • Sadish Sendil, M.,Nagarajan, N.”Improving the performance of the peer to peer network by introducing an assortment of methods “Journal of Computer Science,2011, Vol.7,no. 1, pp. 32-38.
  • Kannan, T.Kalaikumaran, S.Karthik, Dr.V.P.Arunachalam, “An Enhanced Mechanism for profiling and Searching the Internet Endpoints by Clustering the Endpoints Using Fuzzy C-Means Algorithm”, Journals of engineering and Applied Science- Medwell Journals, 2011, vol.6,no.2:131-140, ISSN:1816-949X, pp 135-140.
  • Kannan, S., Maragatham, T., Karthik, S., Arunachalam, V.P.” A study of attacks, attack detection and prevention methods in proactive and reactive routing protocols”, International Business Management ,2011,Vol. 5,no.3, pp. 178-183.
  • Ananthi, S., Sendil, M.S., Karthik, S. “Privacy preserving keyword search over encrypted cloud data “, Communications in Computer and Information Science,2011,480-487.

2012

  • Viswanathan, A., Arunachalam, V.P.,Karthik, S.”Geographical division traceback for distributed denial of service”, Journal of Computer Science ,2012,Vol. 8,no. 2, pp. 216-221.
  • Viswanathan, A.,Arunachalam, V.P.,Karthik, S.”Geographical Division Traceback for Thwarting DDoS using Normal Distribution and Tautological Theorem”, European Journal of Scientific Research,2012,Vol. 71,no. 1, pp. 46-56.
  • Nandagopal, S., Arunachalam, V.P., Karthik, S. “A novel approach for inter-transaction association rule mining “,Journal of Applied Sciences Research,2012, Vol.8,no. 7, pp. 3269-3276.
  • Kannan, S., Arunachalam, V.P., Karthik, S.”Reducing end to end delay in delay tolerant mobile network using aodv and cluster-based routing protocol”,Research Journal of Applied Sciences ,2012,Vol. 7,no. 4, pp. 234-239.
  • Kannan, S., Arunachalam, V.P., Karthik, S.”A new methodology for handling empty zone problem over mobile Ad hoc Network”, Journal of Engineering and Applied Sciences,2012, Vol. 7,no. 3 ,pp. 295-299.
  • Srihari K,Arunachalam V P,Karthik, S.”Automatic RDF generation using RDF automata algorithm”,Advances in Natural and Applied Sciences,2012,Vol.6,no.8, pp. 1614-1619.
  • Srihari, K., Arunachalam, V.P., Karthik, S.”Query indexing method to improve ontology using query indexing technique”, Journal of Applied Sciences Research,2012,no.8, pp. 4156-4160.

2010

  • Karthikeyan, N. Palanisamy, V.Duraiswamy, K. “Optimum density based model for probabilistic flooding protocol in mobile Ad hoc network”, European Journal of Scientific Research,2010,Vol 39,no.4,pp 577-588.
  • Rajendran, T.Balasubramanie, P.”An efficient architecture for agent-based dynamic web service discovery with QOS”, Journal of Theoretical and Applied Information Technology, Journal of Theoretical and Applied Information Technology,2010,vol.15,no.2, pp. 86-95.
  • Subramanian, R., Sivanandam, S.N.,Vimalarani, C.”An optimization of design for S4-duty induction motor using constraints normalization based violation technique ”, Journal of Computer Science,2010,vol.6,no.2, pp. 107-111.
  • Sadish Sendil, M., Raja Ranganathan,S.,Kalaikumaran, T.,Karthik, S.,Nagarajan, N.” Knowledge based peer to peer searching using peer rank selection”, European Journal of Scientific Research algorithm,2010, Vol. 47,no. 2,pp 288-294.
  • Nandagopal, S, Karthik, S, Arunachalam,V.P. “Mining of meteorological data using Modified Apriori algorithm” European Journal of Scientific Research,2010 ,Vol. 47,no. 2, pp. 295-308.
  • Karthik, S., Priya, N.G., Maragatham, T., Chellaprabha, B., Marikannan, M.” An enhanced secured data hiding using digital signature ink method ”, Research Journal of Applied Sciences 2010,Vol. 5, no. 3, pp. 226-230.
  • Karthik, S., Kowshika, A., Maheswari, C.” An enhanced packet forwarding scheme using random way point mobility model with AODV in mobile Ad-hoc network ”, Research Journal of Applied Sciences,2010 ,Vol.5,no. 2, pp. 151-156
  • Karthik, S., Kannan, S., Arunachalam, V.P., Ravichandran, T., Valarmathi, M.L.” An enhanced scheme for improving packet retransmission over mobile Ad- Hoc networks using TCP ”, Journal of Engineering          and Applied Sciences,2010 ,Vol.5,no. 3, pp. 234-238.
  • Karthik,S. Arunachalam V.P.,Ravichandran, T.Valarmathi, M.L, “An Optimizing Technique for MDGT Using DRSA Algorithm Association with       IP Traceback Strategies”, Communications in Computer and Information Science ,2010, pp. 55-61.
  • Kannan, S., Kalaikumaran, T., Karthik, S., Arunachalam, A.P.” A study on various attacks and attack detection methods in mobile Ad-Hoc networks”, International Journal of Systems Signal Control and Engineering Application,2010, Vol. 3,no. 3, pp. 34-39,.
  • Kannan, S., Karthik, S., Arunachalam, V.P.” Performance analysis and comparison of mobile Ad-Hoc network routing protocols ”, Research Journal of Applied Sciences,2010, Vol.5,no. 6 pp. 424-428.
  • Kannan, S., Karthik, S., Arunachalam, V.P. “An investigation on performance analysis and comparison of proactive and reactive routing protocols in mobile ad-hoc network”, International Journal of Soft Computing, 2010,  ,vol.5,no.5 pp. 194-199.
  • Kannan, T.Kalaikumaran, S.Karthik, Dr.V.P.Arunachalam, “Ant Colony Optimization for Routing in Mobile Ad-Hoc Network”, International Journal of Soft Computing, 2010, Vol. 05, No. 06, pp 223-228.

2009

  • Karthik, V. P. Arunachalam and T. Ravichandran “Analyzing interaction between denial of service (DoS) attacks and threats “International Journal of Soft Computing,2009,Vol.4no.2, pp. 68-75.
  • Karthik, V. P. Arunachalam and T. Ravichandran “Analyzing peer to peer traffic aggregation using an optimized method Journal of Computer Science,2009,Vol.5, no.10,pp 738-744, DOI : 10.3844/jcssp.2008.646.651.

2008

  • S. Karthik, V. P. Arunachalam and T. Ravichandran “Multi Directional Geographical Traceback with n Directions Generalization “Journal of Computer Science,2008,Vol 4,no. 8,pp 646-651, DOI : 10.3844/jcssp.2008.646.651
  • Karthik, R.M. Bhavadharini , V.P. Arunachalam “Multi directional geographical traceback with n directions generalization” Journal of Computer Science, 2008,Vol 4, no. 8, pp. 646-651.

2018

  1. Radhika, K. & Mohana Geetha, D, “Augmented recurrance hopping based run length coding for test data compression applications”, Wireless Personal Communications, Vol.102, No.4, pp.3361–3374, 2018.
  2. Jayageetha, J. & Vasanthanayaki c, “Medical Image Quality Assessment Using CSO Based Deep Neural Network”, Journal of Medical Systems, 2018, Vol.42, pp.215-224.
  3. Sivasankari, A.Ahilan, R.Jothin, A.Jasmine Gnana Malar, “Reliable N sleep shuffled phase damping design for ground bouncing noise mitigation”, Microelectronics Reliability, Vol.94, pp.1316-1321, 2018.
  4. Ajayan, D.Nirmal, T.Ravichandran, P.Mohankumar, P.Prajoon, L.Arivazhagan, Chandan KumarSarkar, “InP High Electron Mobility Transistors for Submillimetre Wave and Terahertz Frequency Applications: A Review”, AEU-International Journal of Electronics and Communications, Vol.94, pp.199-214, 2018.
  5. Prajoon, M.Anuja Menokey, J.Charles Pravin, J.Ajayan, S.Rajesh, D.Nirmal,”Investigation of Efficiency enhancement in InGaN MQW LED with compositionally step graded GaN/InAlN/ GaN multi layer barrier”, Superlattices and Microstructures, Vol.116, pp.71-78, 2018.
  6. J Ajayan, T Ravichandran, P Prajoon, JC Pravin, D Nirmal,”Investigation of Breakdown Performance in Lg = 20 nm Novel Asymmetric InP HEMTs for Future High Speed High Power Applications”, Journal of Computational Electronics, Vol.17, No.1, pp.265-272, 2018.
  7. Ajayan, T.Ravichandran, P.Mohankumar, P.Prajoon, J.Charles Pravin, D.Nirmal,”Investigation of DC-RF and Breakdown Behaviour in Lg = 20 nm Novel Asymmetric GaAs MHEMTs for Future Submillimetre Wave Applications”, AEU-International Journal of Electronics and Communications, Vol.84, pp.387-393, 2018.
  8. Ajayan, T. Ravichandran, P. Mohankumar, P. Prajoon, J. Charles Pravin & D. Nirmal,”Investigation of RF and DC Performance of E-Mode In0.80Ga0.20As/InAs/In0.80Ga0.20As Channel Based DG-HEMTs for Future Submillimetre wave and THz Applications”, IETE Journal of Research, 2018.
  9. Nirmal, L. Arivazhagan, A.S.Augustine Fletcher, J. Ajayan, P. Prajoon, “Current collapse modelling in AlGaN/GaN HEMT using small signalequivalent circuit for high power application”, Superlattices and Microstructures, Vol.113, pp.810-820, 2018.
  10. Naveen Balaji, S. Chenthur Pandian,”Design of test pattern generator (TPG) by an optimized low power design for testability (DFT) for scan BIST circuits using transmission gates”, Cluster Computing ,2018, pp. 1-14.

2017

  1. M. Swamynathan, V. Banumathi,”Design and analysis of FPGA based 32 bit ALU using reversible gates”, IEEE International Conference on Electrical, Instrumentation and Communication Engineering (ICEICE), pp.001-004, 2017.
  2. P.SELVA PRABHU, T.RAVICHANDRAN, “An efficient hectic composition web sequential based pattern trees in large data bases”, Journal of Theoretical and Applied Information Technology, Vol.95, No.21, pp.5665-56674, 2017.
  3. Murugapandiyan, S.Ravimaran, J.William, J.Ajayan, D.Nirmal,”DC and microwave characteristics of 20 nm T-gate InAlN/GaN high electron mobility transistor for high power RF applications”, Superlattices and Microstructures, Vol.109, pp.725-734, 2017.
  4. Deepa R, Shanmugam A, Sivasenapathi B, “Reasoning of EEG waveform using revised principal component analysis (RPCA)”, Biomedical Research, Vol.28, No.9, pp.4129-4133, 2017.
  5. Betty Paulraj, Mohana Geetha D and Jeena Jacob I, “An efficient biometric feature extraction using CBIR”, Biomedical Research, Vol.28, No.14, pp.6181-6189, 2017.

2016

  1. Srikanth, I. Thahira Banu, G. Vishnu Priya, G. Usha, “Low power array multiplier using modified full adder “, IEEE International Conference on Engineering and Technology (ICETECH), pp.1041-1044, 2016.
  2. Ramani, J. Geetha; Geetha, K, “Performance analysis of distributive cooperative spectrum sensing in cognitive radio networks with different fading environments”, Journal of Computational and Theoretical Nanoscience, Vol.13, No.8, pp.5081-5085(5), 2016.
  3. Gokilavani, N. Rajeswaran, V. J. Arul Karthick, R. Sathish Kumar, N.Thangadurai, “Comparative results performance analysis of various filters used to remove noises in retinal images”, Online International Conference on Green Engineering and Technologies (IC-GET), pp.001-005, 2016.
  4. Rajeswaran and C. Gokilavani, “Reduction of FBM noise in brain MRI images using wavelet thresholding techniques”, Asian Journal of Information Technology, Vol.15, No.5 ,pp.855-861, 2016.
  5. Rajeswaran, S.Karpagaabirami, C.Gokilavani, R.Rajendran, “FPGA based denoising method with T-model mask architecture design for removal of noises in images”, Procedia Computer Science, Vol.85, pp.519-526, 2016.
  6. Prabakaran and N.K. Karthikeyan,”Energy efficiet inter cluster routing using PSO for WSN”, Asian Journal of Information Technology, Vol.15, No.10, pp.1522-1530, 2016.
  7. Thangavel and T. Ravichandran,”IXLDA integrated cross layer design approach for performance optimization in MANET”, Asian Journal of Information Technology, Vol.15, No.14, pp.2420-2433, 2016.
  8. Prabakaran and N.K. Karthikeyan,”Improving the energy level of node and prevent the cluster head failure in wireless sensor networks”, Asian Journal of Information Technology, Vol.15, No.11, pp.1663-1669, 2016.
  9. G and Umamaheswari K,”Attending to preserve energy during private data delivery using various encryption techniques”, Asian Journal of Information Technology,Vol.15, No.10, pp.1574-1578, 2016.
  10. Mohanasundaram and T. Ravichandran,”Urgency aware packet scheduling in AODV (UaPS-AODV) protocol for enhanced QoS under delay sensitive applications in MANET”, Asian Journal of Information Technology, Vol.15, No.14, pp.2434-2446, 2016.
  11. Yasoda and A. Shanmugam, “Evaluation of cognitive capacity of an individual using biosignals EOG and EEG with P300 emphasis”, Asian Journal of Information Technology, Vol.15, No.21, pp.4370-4376, 2016.
  12. Arumugam and N. Rajeswaran, “An analog low power VLSI implementation of artificial neural network architecture”, Asian Journal of Information Technology, vol.15, No.5, pp. 955-960, 2016.
  13. Prakash, U. Gowshika, T. Ravichandran ,”A smart device integrated with an android for alerting a persons health condition internet of things”, Indian Journal of Science & Technology, vol.9, No.6, pp.001-006, 2016.
  14. Mathan, T. Ravichandran, D. Mahesh Kumar and R. Kannusamy, “Fault diagnosis in ternary content addressable memory with secured and improved decoding algorithm”, Asian Journal of Information Technology, vol.15, No.17, pp.3366-3375, 2016.

2015

  1. Yasoda and A. Shanmugam, “Analysis on EEG for predominent occurance of eye blink activity”, International Journal of Applied Engineering Research, vol.10, No.24, pp.43926-43929, 2015.
  2. V.Manoj Gowtham, “Design of stacking technique based DFAL frequency divider”, International Conference on Communications and Signal Processing (ICCSP), pp.0663-0666, 2015.
  3. Nagalinagam Rajeswaran, Tenneti Madhu, Bini Joy, Ruth Anita, Shirley D , “Ultra low voltage and low power static random access memory design using average 6.5 T technique”, Leonardo Electronic Journal of Practices and Technologies, vol.14, No.27, pp.138-154, 2015.
  4. Subhashini and K. Jayanthi, “Design of microstrip patch antenna and a configuration to improve gain”, ARPN Journal of Engineering and Applied Sciences, vol.10, No.19, pp.4200-4203, 2015.
  5. Prashanthini, D. Somasundareswari, “Spectro temporal filtering algorithm in short time fourier transform domain for multi channel speech enhancement”, International Journal of Applied Engineering Research, vol.10, No.20, pp.18244-18248, 2015.
  6. M. Pavalam, S.S. Arthi, Thushara Prabhakaran, “Clustering based data aggression techniques in WSN: A survey”, International Journal of Applied Engineering Research, vol.10, No.20, pp.17555-17559, 2015.
  7. Ravichandran and A. Shanmugam, “Clustering with shared nearest neighbor unscented transform based estimation”, ARPN Journal of Engineering and Applied Sciences, vol.10, No.5, pp.2263-2272, 2015.
  8. Sridevi, Lakshmi Prabha, “Firefly optimization and mixed tree based clock distribution network for an optimal energy FFT architecture”, International Journal of Applied Engineering Research, vol.10, No.17, pp.38016-38024, 2015.
  9. Rajesh Kumar D, A. Shanmugam, D.K. Bhupathiraja, “Design and development of novel resource allocation algorithm for energy efficiency in enterprise cloud”, International Journal of Applied Engineering Research, Vol.10, No.20, pp.18687-18691, 2015.
  10. P. Krishnaveni Jayanthi, Kandasamy Jayanthi, “Multifeed microstrip antenna for UWB applications“, International Journal of Applied Engineering Research, 2015, vol.10, No.20, pp.17249-17253.

2014

  1. Yasoda, A. Shanmugam, “Certain analysis on EEG for the detection of EOG artifact using symlet wavelet”, Journal of Theoretical and Applied Information Technology, Vol.67, No.1, pp.54-58, 2014.
  2. Karzan Palani, P. Ramamoorthy, “Performance evaluation of cross layer based AODV protocol using multipath gateway route discovery for MANETs”, Journal of Theoretical and Applied Information Technology, Vol.13, No.10, pp.588-594, 2014
  3. Gokilavani ; N. Rajeswaran ; V. J. Arul Karthick ; R. Sathish Kumar ; N. Thangadurai, “Fuzzy clustering based Ant Colony Optimization Algorithm for MR brain image segmentation”, Journal of Theoretical and Applied Information Technology, Vol.65, No.3, pp.644-649, 2014.
  4. Nagalingam RAJESWARAN, Tenneti MADHU and Munagala SURYAKALAVATHI, “Improved switching performance analysis of space vector pulse width modulation on field programmable gate array”, Leonardo Electronic Journal of Practices and Technologies, 83-96, 2014.

2013

  1. Karzan Palani, P. Ramamoorthy, “Quality of service aware of cross layer approach on adaptive gateway discovery scheme for mobile ad hoc networks”, Journal of Computer Science, Vol.9, No.10, pp.1329-1340, 2013.
  2. Rajeswaran, T. Madhu, M. Suryakalavathi,”Hardware testable design of genetic algorithm for VLSI circuits”, Applied Mechanics and Materials, Vol.367,pp.245-249,2013
  3. Rajeswaran, T. Madhu, M. Suryakalavathi, “VHDL synthesizable hardware architecture design of back propagation neural networks”, IEEE Conference on Information & Communication Technologies, pp.445-450, 2013.
  4. Loganathan ; P. Ramamoorthy, “Efficient routing with multicost parameters based DSDV protocol in wireless ad hoc networks”, International Conference on Pattern Recognition, Informatics and Mobile Engineering, pp.435-439, 2013.
  5. Jayanthi Kandasamy, Arunachalam V P, C. Vasanthanayaki, “Recovering weak signal using nakagami fading wireless channel with multiuser diversity”,WSEAS Transactions on Communications,2013, Vol.12, No.12, pp.609-618.

2012

  1. Jayasheela, A. Rajeswari,”Performance comparison of MUD schemes in time hopping PPM UWB using M-ZCZ sequences”, Journal of Information & Computational Science, 2012,Vol.9, No.18, pp.5721–5730.
  2. Jayasheela and A. Rajeswari,”Improved successive interference cancellation for MIMO/UWB-based wireless body area network”, International Journal of Antennas and Propagation, 2012, pp.001-010
  3. Saranya, A.Sridevi, “An Efficient Heuristic Algorithm For Fast Clock Mesh Realization”, International Journal Of Scientific & Engineering Research, 2012, Vol.3, No.4, pp.140-144.
  4. Jayanthi ; V.P. Arunachalam ; C. Vasanthanayaki,”Raising the Performance of Nakagami Multipath Fading channel with multiuser diversity in reliable wireless medium”, International Conference on Recent Trends in Information Technology, 2012, pp.266-269.

2010

  1. Bhaskarpillai Gopinath, R. Gupta, “Classification of Thyroid Carcinoma in FNAB Cytological Microscopic Images”, International Journal Of Healthcare Information Systems And Informatics, 2010, Vol.5, No.2, pp.60-72.

2007

  1. Bhuvaneswari ; S.N. Sivanandam, “Fuzzy Pairwise Generalized a-Closed Mappings in Fuzzy Bitopological Spaces”, International Conference on Signal Processing, Communications and Networking, 2007, pp.438-441.
  2. Arunkumar Thangavelu, K. Bhuvaneswari, K. Kumar, K. SenthilKumar and S.N. Sivanandam, “Location Identification and Vehicle Tracking using VANET ( VETRAC )”, IEEE – ICSCN, 2007, pp.112-116.

2018

  1. Chenthur Pandian S, “Design of test pattern generator (TPG) by an optimized low power design for testability (DFT)for scan BIST circuits using transmission gates,” Cluster Comput-Springer, 2018, pp.1-14.
  2. R, “Review: Research Issues in DFIG Based Wind Energy System  ,” ELECTRONICS Journal , 2018, vol.22,no.1,pp.40-47.
  3. R, “On the Dynamics of Floating Solar Power Plant: Opportunity for Sustainable Energy Generations ,” Journal of Advanced Research in Dynamical & Control Systems, 2018 , vol.10,no.13,pp.1371-1378.

2017

  1. Chenthur Pandian S, “A Novel scheme for safeguarding confidentiality in public clouds for service users of cloud computing ,” Cluster Comput-Springer,2017. , vol.12 , no.14 , pp.1-10.
  2. Vijayakumar R, “Design of renewable energy based PEV’s charging station with energy management technique ,” Journal of Advanced Research in Dynamical and Control System, 2017, vol.9 , pp.856-869.
  3. Ramakrishnan C, “Performance Analysis of voltage stateless controller for renewable energy supported shunt active power filter ,” International Journal of Testing and Evaluation, 2017, vol.45, No.3,pp.1-14.
  4. Karthick R, “Fuzzy based optimized energy management strategy of renewable energy sources for stand alone applications  ,” Journal of Electrical Engineering, 2017 , vol.17,no.1,pp.418-426.

2016

  1. Chenthur Pandian S,”Enforcing security and privacy over multi cloud framework using assessment techniques”,International Conference on Intelligent Systems and Control (ISCO),2016.
  2. Bharth S, “Coordinated control of DFIG system during unbalanced grid voltage conditions using reduced order generalized integrators ,” International Journal of Electronics, Electrical and Computational System, 2016 , vol.6 , no.10 , pp.62-68.
  3. Jayashree S, “Modelling and control design of three phase four wire UPQC for power quality improvement,” pakistan journal of biotechnology, 2016 , vol.13, pp.474-477.
  4. Chenthur Pandian S, “Hybrid cluster based geographical routing protocol to mitigate malicious nodes in mobile and adhoc network ,” J. Ad Hoc and Ubiquitous Computing, 2016, vol.21, No.4,pp.224-236.
  5. Subramanian R, “An Enhanced PSO based clustering energy optimization algorithm for wireless sensor network open access ,” The Scientific World Journal,pp.1-11, 2016.
  6. Bharath S, “Coordinated Control of DFIG System During Unbalanced Grid Voltage Conditions Using Reduced Order Generalized Integrators ,” pakistan journal of biotechnology, 2016 , vol.13,pp.552-556.

2015

  1. Suganthi S T,”Single and two stage inverter based grid connected photovoltaic power plants in ride through capability under grid faults”,IEEE Sponsored 2nd International Conference on Innovations in Information Embedded and Communication Systems,2015.
  2. Rajesh R,”Variable speed wind energy conversion system using PMSG & Z source inverter “,IEEE Sponsored 2nd International Conference on Innovations in Information Embedded and Communication Systems,2015.
  3. Rajasekaran R,”Independent operation of DFIG based WECS using resonent feedback compensators under unbalanced grid voltage conditions”, IEEE Sponsored 2nd International Conference on Innovations in Information Embedded and Communication Systems,2015.
  4. Rajasekaran R,”DFIG based WECS for seamless operation during grid faults”,IEEE Sponsored 2nd International Conference on Innovations in Information Embedded and Communication Systems,2015.
  5. Beny J R, “Energy harvesting for driving low power devices ,” International Journal of Applied Engineering Research, 2015, vol.10, No.7,pp.16483-16490.
  6. Senthilkumar R, “Synchronous reference frame control algorithm based four leg inverter dstatcom for power quality improvement ,” International Journal on Applications in Electrical and Electronics Engineering, 2015, vol.1, No.4,pp.1-6.
  7. Chenthur Pandian S, “A Novel and low cost secure key management using verifiable secret sharing in mobile adhoc networks ,” International Journal of Applied Engineering Research, 2015, vol.10, No.19,pp.40183-40190.

2014

  1. Subramanian R,”Design of matrix converter based dynamic voltage restorer for power quality enchancement“, International Conference on Green Computing Communication and Electrical Engineering,2014.
  2. Rajasekaran R, “Enhancing the LVRT capability of a DFIG based wind power system by correlating the performance of SMES and SFCL ,” Journal of Electrical Engineering,2014., vol.14, No.1,pp.204-209.
  3. Ramakrishnan C, “Performance analysis of PV powered seven level inverter with reduced switches ,” International Journal of Applied Engineering Research, 2014, vol.9, No.23,pp.21385-21400.
  4. Ramakrishnan C, “Simplified five level inverter as series active power filter for minimizing THD in a nonlinear system ,” International Journal of Theoretical and Applied Information Technology,2014., vol.68,pp.81-89.
  5. Chenthur Pandian S, “An efficient autonomous key management with verifiable secret sharing schemes for reduced communication/computation costs in MANET ,” International Reviews on Computers and Software, 2014, vol.9,no.1,pp.48-53.
  6. Karthick R, “Grid interface of a PMSG based wind energy conversion system with power quality improvement features    ,” Journal of Theoretical and Applied Information Technology, 2014 , vol.68,no.2,pp.307-314.

2013

  1. Chenthur Pandian S, “An efficient autonomous key management with reduced communication/computation costs in mobile ad hoc network ,” Journal of Computer Science,2013., vol.9,no.10,pp.1260-1266.
  2. Chenthur Pandian S, “Trustworthy position based routing to mitigate against the malicious attacks to signifies secured data packet using geographic routing protocol in MANET ,” WSEAS TRANSACTIONS on COMMUNICATIONS,2013., vol.12,no.11,pp.584-603.
  3. Chenthur Pandian S, “Multi channel voice active detection using instance filed auto-interrelation function ,” International Review on Computers and Software,2013., vol.8,no.7,pp.1680-1687.
  4. Divya R,”comparision betweeen symmetric & new model asymmetric Z-source cascaded multilevel inverter fed im for selective harmonic minimization & THD reduction with PV Cell input”,, International Conference on Energy Efficient Technologies for Sustainability,2013.
  5. Suganthi S T,”An improved differential evolution based approach for emission constrained optimal power flow“, International Conference on Energy Efficient Technologies for Sustainability,2013.
  6. Rajasekaran R,”Co-ordination of SMES with STATCOM for mitigating SSR and damping power system oscillations in a series compensated wind power system”,International Conference on Computer Communication and Informatics,2013.
  7. Suparna N, “Design and simulation of phase-locked loop controller based unified power quality conditioner using nonlinear loads ,” International Journal of Power Electronics and Drive Systems, 2013 , vol.2,no.4,pp.417-423.

2012

  1. Sheela Sobhana rani K, “A fuzzy based optimization for routing in wireless sensor networks ,” Journal of Applied Sciences Research , vol.8,no.4,pp.2137-2142, 2012.
  2. Rajangam K, “Profit based Unit Commitment with Forecasted Power Demand table,” European Journal of Scientific Research , 2012, vol.77,no.2,pp.221-230.

2010

  1. Subramanian R, “An optimization of design for S4-duty induction motor using constraints normalization based violation technique,” journal of Computer Science, 2010 , vol.6,no.2,pp.107-111.

2018

  1. R. Aruna, R. Subramanian, P.Sengottuvelan, J. Shanthini,”Optimized energy efficient route assigning method using related node discovery algorithm in MANET”,Cluster Computing,Springer,2018,vol.,no.1386-7857,pp.1-11.

2017

  1. J T Thirukrishna, S Karthik, V P Arunachalam,”evamp energy efficiency in Homogeneous Wireless Sensor Networks using Optimized Radio Energy Algorithm (OREA) and Power-Aware Distance Source Routing protocol”,Future Generation Computer Systems ,Elsevier,2017,vol.81,pp.331-33.

2016

  1. Sabitha, R Karthik, S.; Shanthini, J, “Breast Cancer Detection Using Enhanced Descriptive Approach “,Journal of Medical Imaging and Health Informatics, American Scientific Publishers,2016,vol.8,no.8,pp.1887-1892.
  2. J.Shanthini ,S.Karthik,”Local Search based grid scheduling model for independent grid tasks”,Assian Journal of Information Technology,2015,vol.15,no.2,pp.365-371.

2015

  1. M.Udhayamoorthi, S.Karthik, C.senthilkumar, K.S.Mohan, P.S.Dinesh,”Enhanced designing of network using IPV6 protocol and enabling HSRP for redundancy”,IEEE international Conference ICSNS 2015,2015,vol.,no.,pp.7292431.
  2. J.Shanthini ,T.KalaikumaranS.Karthik, “Hybrid Scheduling model for independent Grid Tasks Open Access”, Scientific World Journal, 2015,pp.692084.

2011

  1. L.M.Nithya, A.Shanmugam,”Scheduling in computational grid with a new hybrid ant colony optimization algorithm”,European journal of scientificresearch,2011,vol.62,no.2,pp.273-281.

2010

  1. T.Shanmugapriya K.Sangeetha,” Performance evaluation of Ear in variable Power Clustered Sensor network”,IEEE international Conference on INCOCCI2010,2010,vol. 5738723, pp.138-142.

2018

  1. J Ajayan, D Nirmal, T Ravichandran, P Mohankumar, P Prajoon, L Arivazhagan, Chandan Kumar Sarkar,”InP high electron mobility transistors for submillimetre wave and terahertz frequency applications: A review”,AEU-International Journal of Electronics and communications,2018,vol.94,pp.199-214
  2. J Ajayan, T Ravichandran, P Mohankumar, P Prajoon, JC Pravin,D.Nirmal,”Investigation of RF and DC Performance of E-Mode In0.80Ga0.20As/InAs/In0.80Ga0.20as Channel based DG-HEMTs for Future Submillimetre Wave and THz Applications”,IETE Journal of Research,2018
  3. J Ajayan, T Ravichandran, P Mohankumar, P Prajoon, JC Pravin,”Investigation of DC-RF and breakdown behaviour in Lg= 20 nm novel asymmetric GaAs MHEMTs for future submillimetre wave applications”,AEU-International Journal of Electronics and Communications ,2018,vol.84,pp.387-393

2014

  1. Vivekanandan. P,Arunachalam, V.P.”Evaluation of mechanical properties of aluminium alloy 7075 reinforced with tungsten carbide and fly-ash”,International Review of Mechanical Engineering,2014,vol.8,no.1,pp.75-79

2013

1.Vivekanandan.P, Arunachalam, V.P,”Experimental investigations of silicon carbide – Fly Ash reinforced Aluminium metal matrix composite”,International         Review of  Mechanical Engineering,2013,vol.7,no.5,pp.930-938.

2018

  1. Chinnasamy, P.Tamilselvam, R.Ranjith, “Environmental effects of adding aluminium oxide nano additives on diesel engine fueled with pyrolysed biomass oil – diesel blends .”,Energy sources-Recovery, Utilisation and envirinmental effects ,2018,vol. 40,no. 22,pp. 2735-2744.
  2. Chinnasamy, P.Tamilselvam.,”Green synthesis, characterization and optimization studies of zinc oxide nano particle using costusigneous leaf extract”,Materials today, 2018,vol. 5,no. 2,pp. 6728-6735.
  3. S.Kaushik, M.Subramaniam, M.Sakthivel,”Optimization of the process parameters on temperature rise in CNC End Milling of Al 7068 using Hybrid techniques”,Materials today, 2018,vol. 5,no. 2,pp. 7037-7046.

2017

  1. Ranjith,”Influence of Titanium – coated (B4Cp+SiCp) particles on sulphide stress corrosion and wear behaviour of AA7050 hybrid composites (for MLG Link)” , Journal of Australian Ceramic Society, ISSN: 2510-1560,  Aug 2017,Vol 53, Issue 2, pp 1017–1025.
  2. Ranjith,”Predicting the Tensile Strength of Friction Stir Welded Dissimilar Aluminum Alloy using ANN”International Journal of Civil Engineering and Technology“,2017,vol. 8,no. 9,pp. 345-350.
  3. Selvakumar,”Reliability analysis of centrifugal pump through FMECA and FEM”International journal of Performability engineering, 2017,pp. 119-128.

2015

  1. Prakash, T.Sivasankaran, S.Sasikumar, P.,”Mechanical and Tribological Behaviour of Friction-Stir-Processed Al 6061 Aluminium Sheet Metal Reinforced with Al2O3 / 0.5 Gr Hybrid Surface Nanocomposite”,Arabian Journal for Science and Engineering, 2015,vol. 40,no. 2,pp. 559-569.
  2. Dharmalingam, K.K.Sivagnanaprabhu, J.Yogaraja, S.Gunasekharan,”Experimental Investigation of Heat Transfer Characteristics of Nano Fluid Using Parallel Flow, Counter Flow and Shell and Tube Heat Exchanger “,International Journal of Archive of Mechanical Engineering, , 2015, Vol. 62,no.4, pp 509-522.
  3. Chelliah, B.Karthick, A.VimalKodeeswaran,V.R.Hariram,”Helmet cooling system using phase change material for Long drive”,ARPN Journal of Engineering and Applied Sciences, 2015,vol. 10,no. 4,pp. 1770-1773.
  4. Selvakumar, K.Natarajan,” Failure Analysis of Centrifugal Pumps based on Survey “, APRN Journal of Engineering and applied Sciences. , March 2015,Vol. 10 , pp1960-1965.

2014

  1. Thirumalai, R.Srinivas, S. Vinodh,A.L. Kishore Kumar,T. Kowshik Kumar,”Optimization of Surface Roughness and Flank Wear in Turning SCM440 Alloy Steel Using Taguchi Method”,Applied Mechanics and Materials, 2014,vol. 592-594,pp. 641-646.
  2. Sureshkumar, P Tamilselvam, & R Dharmalingam,”Design,Fabrication, and Analysis of a Hybrid FIBER Composite Mono leaf Spring Using Carbon and E-Glass Fibers for Automotive Suspension Applications”,Mechanics of Composite Materials, 2014,vol. 50,no. 1,pp. 115-122.
  3. Prakash, T,Sasikumar, P,Sivasankaran, S.,”Investigations on the microstructure and mechanical property of friction stir process AA6061 Aluminum sheet metal reinforced with Al2O3 surface composites”,International journal of materials engineering innovation,2014,vol. 5,no. 3,pp. 192-204.
  4. Dharamalingam , B.Senthil Kumar , R.Thirumalai, “Nano materials and Nano fluids : an innovative technology study for new paradigms for technology enhancement”,Procedia engineering,2014,vol. 97,pp.1434-144.
  5. Sharma, S.K,Chandrasekaran, M,Thirumalai, R.,”Multi-Objective Optimization of Surface Roughness and Tool Wear in Turning Inconel 718: A Desirability Analysis, Genetic Algorithm and Firefly Algorithm”,Applied Mechanics and Materials,2014,vol. 592-594, pp. 545-594.
  6. Kumar, K.S,Senthilkumaar, J.S,Thirumalai, R.,”Chip Morphology Investigation among Dry, Wet and Gas Cooled Machining of Super Duplex Stainless Steel”,Applied Mechanics and Materials,2014, 592-594,pp. 811-815.

2013

  1. Vivekanandan, P,Arunachalam, V.P.,”Experimental investigations of silicon carbide – Fly Ash reinforced Aluminium metal matrix composite”,International Review of Mechanical Engineering,2013,vol. 7,no. 5, pp. 930-938.
  2. Thirumalai, R,Senthilkumaar, J.S.,”Multi-criteria decision making in the selection of machining parameter in machining Inconel 718“,Journal of mechanical science and technology,2013,vol. 27,no. 4,pp. 1109-1116.
  3. L Savadamuthu, S Muthu,., T.Rakhul, & S Jothimani,.”Multi Characteristic Optimization in Wire Cut EDM by Using Taguchi Data Envelopment Analysis Based Ranking Methodology”,International Review of Mechanical Engineering,2013,vol. 7,no.3,pp. 468-473.

2012

  1. Thirumalai, R,Senthilkumaar, J.S,Selvarani, P,Ramesh, S,”Machining characteristics of Inconel 718 under several cutting conditions based on Taguchi method. Proceedings of the Institution of Mechanical Engineers”, Part C: Journal of Mechanical Engineering Science, 2012,Vol, 01 ,no, 9 .

2008

  1. N, Arunachalam.V.P, Balaji.B,”A practical approach to optimize the coating parameters to win customer confidence”,Proceeding of the Institution of Mechanical Engineers, part B: Journal of engineering Manufacture,,2008,vol. 222,no. 4,pp. 495.
  2. N, Devadasan.S.R,”Total quality function deployment in rubber processing”,Production planning and control, 2008,vol. 19, no. 1,pp. 53-66

2006

  1. s.v, Dhanadapani.,”Investigation of pollution monitoring and its control for the indian heavy duty diesel truck applications to meet emision regulations”,Pollution research,2006,vol. 25,no. 4,pp. 889-892.
  2. s.v, Dhanadapani.,”Experiemental investigation of LPG Diesel dual fuel IDI compression ignition engine for Nox emmision reduction using urea – SCR technology”,Pollution research,2006,vol. 25,no. 4,pp. 889.

2011

  1. Metilda, R.M and Vivekanandan, K, “Impact of Supply Chain Management practices on the competitive advantage of Indian retail supermarkets”, International Journal of Logistics Systems and Management ,Jan 2011, vol. 9, no. 2, pp. 170-185.

2007

  1. N.Subramanian, A.Venkatachalam and V.Subramaniam, “Wicking behaviour of regular ring, jet ring-spun and other types of yarns compact“, Indian Journal of Fibre and Textile Research,June 2007, vol. 32, no. 2, pp. 158-162 .
  2. N.Subramanian, A.Venkatachalam and V.Subramaniam, “Effect of some nozzle parameters on the characteristics of jet ring-spun yarns“, Indian Journal of Fibre and Textile Research, March 2007, vol. 32, no. 1, pp. 47-52.
  3. N.Subramanian, A.Venkatachalam and V.Subramaniam, “Prediction and optimization of properties using geneticyarn algorithm/artificial neural network”, Indian Journal of Fibre and TextileResearch,December 2007, vol. 32, no. 4, pp. 409-413.

2018- PHY:

  1. Naresh Kumar, K.Sakthivel, V. Balasubramanian, D. Sengottaiyan and J.Suresh, “Microwave assisted green synthesis of ZNO nanorods for dye sensitized solar cell application”, Indian Journal of Chemical Technology, vol. 25, no. 4, pp. 383-389, Apr. 2018.

2017- PHY:

  1. Balasubramanian, P.Naresh Kumar and D.Sengottaiyan, “Effect of deposition temperature on structural, optical and electrical properties of copper bismuth sulphide thin films deposited by chemical bath deposition”, Material Science-Poland, vol. 35, no. 2, Jul, 2017.
  2. N.Kumar, K. Sakthivel and V.Balasubramanian,”Microwave assisted bio synthesis of rice shaped ZnO nanoparticles using Amorphophallus konjac tuber extract and its application in dye sensitized solar cells”, Materials Science-Poland, vol. 35, no. 1, pp. 111-119, Mar, 2017.

2018- CHE:

  1. Suresh, G.Pradheesh, V.Alexramani, M.Sundarrajan, S.I.Hong, “Green synthesis and characterisation of hexoganol shaped MgO nanoparticles using insulin plant (Costus pictus D.Don) leave extract and its antimicrobial as well as anticancer activity”, Advanced Powder Technology, vol. 29, no. 7, pp. 1685-1894, Jul. 2018.
  2. Kanagamani, P.Muthukrishnan, M.Illayaraja, K.Shankar and A.Kathiresan, “Synthesis, Characterisation and DFT Studies of stigmasterol medidated Silver nano particles and their Anticancer Activity”, Journal of Inorganic and Organomettalic Polymers and Materials,vol. 28, no. 3, pp. 702-710, Mar. 2018.
  3. Suresh, G.Pradheesh, V.Alexramani, M.Sundarrajan, S.I.Hong, “Green synthesis and characterisation of hexoganol shaped zinc oxide nanoparticles using insulin plant (Costus pictus D.Don) leave extract and its antimicrobial as well as anticancer activity”, Advances in Natural Science: Nanoscience and Nanotechnology, vol. 9, no. 13, pp. 015008, Jul. 2018.
  4. Suresh, G.Pradheesh, V.Alexramani and S.I.Hong,”Phytochemical screening, characterisation and anti microbial, anti cancer activity of bio synthesised zinc oxide nano particle using nano particles using cyatha nilgiriensis holttum palnt extract”, Journal of Bionanoscience, Vol. 12, no.1, pp. 37-48, Jan, 2018.

2017- CHE:

  1. Kanagamani, P.Muthukrishnan, M.Illayaraja, K.Shankar and A.Kathiresan,”Synthesis of Leucaena medidated silver nano particles Assesing their photocatalytic degradation of Cr(VI) and in vitro cytotoxity against DLA cells”, Journal of Photochemistry and Photobiology A: Chemistry, vol. 346, pp. 470-478, Sep. 2017.

2016- CHE:

  1. Gowri, R.R.Gandhi, S.Senthil, J.Suresh and M.Sundrarajan, “Enhancing antimicrobial activity of biotemplated TiO2 nanoparticles using aloe vera plant extract”, Journal of Bionanoscience, vol. 19, no. 3, pp. 181-190, Mar, 2016.

2015- CHE:

  1. Manjuladevi, S.Manonmani, “Removal of hexavalent chromium ions from aqueous solution by adsorption using activated carbon prepared from cucumis melo peel activated carbon”, Oriental Journal of Chemistry, vol. 31, no. 1, pp. 531-539, Jan, 2015.
  2. Pradheesh, J.Suresh and V.Alexraman, “Phytochemical and GC-MS analysis of methanolic extract of Pisonia grandis R.Br”, International Journal of Chemical Sciences, vol. 13, no. 3, pp. 1295-1304, Mar, 2015.
  3. M.Ponnusamy, S.Agilan and N.Muthukumarasamy, “A simple route synthesis of Cr-doped NiO nanoparticles and their Characterisation studies”, International Journal of Chemical Sciences, vol. 13, no. 2, pp. 683-692, 2015.

2009- CHE:

  1. Jalajaa, M. Manjuladevi and S.V.Saravanan, ” Removal of acid dye from textile waste water by adsorption using activated Carbon prepared from Punica Granatum (Pomegranate) rind”, Pollution Research, Vol. 28, no. 2, pp. 287-290, Feb. 2009.
  2. Manjuladevi, P. Jalajaa and S.V.Saravanan,”Removal of Pb (II) from aqueous solution by activated carbon prepared from Artemesia vulgaris-stem waste”, Pollution Research, Vol. 28, no. 2, pp. 295-299, Feb. 2009.

2015- Maths:

  1. Viswanathan, K. Udhaya Chandrika, J.Ebenesar Anna Bakiyam, “Fuzzy retrial queing system with coxian-2 vacation”,International Journal of Applied Enginering Research, vol. 10, no. 8, pp. 21315-21322, Aug, 2015.
  2. Ebenesar Anna Bakiyam, Udhaya Chandrika and A.Viswanathan, “Bulk Arrival multistage retrial queue with vacation”, Applied Mathematical Sciences, vol. 9, pp. 53-56, Jul, 2015.

Publication in Web of Science (WoS)

2017

  • Prince Arulraj, G,”Rainfall variation and frequency analysis of Salem district TamilNadu”,Indian Journal of Geo-Marine Sciences ,Jan2017, vol 46,no. 1, pp213-218.
  • Prince Arulraj, G,”Evaluation of the groundwater quality feasibility zones for Irrigation purpose in Salem district, Tamilnadu, India,Indian Journal of Geo-Marine Sciences ,Jan2017, vol 46,no.1.
  • O R Kavitha,Prince Arulraj, G., “An experimental study on combined effects of glass fiber and Metakaolin on the rheological, mechanical, and durability properties of self-compacting concrete” Applied Clay Science,July 2017,vol147.

2016

  • S.D.Anitha Selvasofia , G. Prince Arulraj , “Accident & Traffic Anaklysis using GIS” Bio Medical Research,2016,ISSN 0970-938X,PP 103-106.
  • Kavitha O.R,Shanthi V.M,Prince Arulraj.G & Sivakumar V.R.,”Microstructural study on eco-friendly and durable self compacting concrete blended with Metakolin”, Applied Clay Science,DOI:10.1010/j.clay.2016.02.011,2016,Vol.124,pp143-149.
  • Prince Arulraj, G.,”Influence of mineral admixtures on Mechanical properties of self compacting concrete under elevated temperature“,Fire and materials An International Journal, Feb 2016,vol 40, no.7,pp12-15.
  • Prince Arulraj, G.,”Contamination analysis of ground water in Coimbatore district, India: a statistical approach”,Environmental Earth Sciences , Nov 2016,vol 2, no.2, pp1-12.

2015

  • Anuradha R,”Performance of Self-compacting geopolymer concrete containing different mineral admixtures”, Indian Journal of Engineering and Materials Science,Aug 2015,Vol 22,no. 4,pp473-481.
  • Kavitha, O.R, Shanthi, V.M, Prince Arulraj, G & Sivakumar, P, “Fresh micro-and macrolevel studies of metakaolin blended self-compacting concrete”, Applied Clay Science, DOI:10.1016/j.clay.2015.06.024, 2015, vol.114, pp. 370-374.
  • Krishnapriya.S, Venkatesh Babu. DL  & Prince Arulraj. G, “Isolation and identification of bacteria to improve the strength of concrete”, Microbiological Research,DOI:10.1016/j.micres.2015.03.009, 2015, Vol. 174, pp. 48-55.

2019

  1. Karthik, ” A Hybrid Filtering Approach for MRI image with Multiresolution”, The Journal of Networks, Software Tools and Applications, Cluster Computing DOI 10.1007/s10586-017-1213-9,Springer, ISSN:1386-7857,2019.

2018

  1. Khan, M., Han, K.Karthik, S.  “Designing Smart Control SystemsBased on Internet of Things and Big Data Analytics” ,Wireless Personal Communications,2018,vol.99,no.4, pp. 1683-1697 .
  2. Thirukrishna,J T.Arunachalam, V.P..,Karthik, S., “Revamp energy efficiency in Homogeneous  Wireless Sensor Networks using Optimized Radio Energy Algorithm (OREA) and Power- Aware Distance Source Routing protocol “,Future Generation Computer Systems,2018,pp 331-339.
  3. Bhavadharini, R.M., Karthik, S.,Karthikeyan, N.,Paul, A.”Wireless Networking Performance in IoT Using Adaptive           Contention Window“, Wireless Communications and Mobile Computing, 2018.

2017

  1. J.Alfred Daniel,Karthi Subburathinam,Anand Paul,Newlin Rajkumar,Seungmin Rho, ”Big Autonomous Vehicular data Classifications: Towards procuring intelligence in ITS, Vehicular Communication, September 2017, Vol.9,ISSN:2214-2096,pp 306-312.

2016

  1. Sabitha, R., Karthik,S ,S., Shanth1n1, j. “Breast cancer detection using enhanced descriptive approach”, Journal o£ Medical Imaging and Health Informatics,2016 ,vol.6,no.8, pp. 1887-1892.

2018

1. Jayageetha, J. & Vasanthanayaki, C., “Medical Image Quality Assessment Using CSO Based Deep Neural Network”, Journal of Medical Systems, 2018, Vol.42, pp.215-224.
2. Radhika, K. & Mohana Geetha, D., “Augmented recurrance hopping based run length coding for test data compression applications”, Wireless Personal Communications, 2018,Vol.102, No.4, pp.3361–3374.
3. P.Prajoon, M.Anuja Menokey, J.Charles Pravin, J.Ajayan, S.Rajesh, D.Nirmal,”Investigation of Efficiency enhancement in InGaN MQW LED with compositionally step graded GaN/InAlN/ GaN multi layer barrier”, Superlattices and Microstructures, 2018, Vol.116, pp.71-78.
4. D. Nirmal, L. Arivazhagan, A.S.Augustine Fletcher, J. Ajayan, P. Prajoon,”Current collapse modelling in AlGaN/GaN HEMT using small signalequivalent circuit for high power application”, Superlattices and Microstructures, 2018,Vol.113, pp.810-820
5. J Ajayan, T Ravichandran, P Prajoon, JC Pravin, D Nirmal,”Investigation of Breakdown Performance in Lg = 20 nm Novel Asymmetric InP HEMTs for Future High Speed High Power Applications”, Journal of Computational Electronics, 2018, Vol.17, No.1, pp.265-.272
6. J.Ajayan, T.Ravichandran, P.Mohankumar, P.Prajoon, J.Charles Pravin, D.Nirmal,”Investigation of DC-RF and Breakdown Behaviour in Lg = 20 nm Novel Asymmetric GaAs MHEMTs for Future Submillimetre Wave Applications”, AEU-International Journal of Electronics and Communications, 2018, Vol.84, pp.387-393
7. J.Ajayan, D.Nirmal, T.Ravichandran, P.Mohankumar, P.Prajoon, L.Arivazhagan, Chandan KumarSarkar,”InP High Electron Mobility Transistors for Submillimetre Wave and Terahertz Frequency Applications: A Review”, AEU-International Journal of Electronics and Communications, 2018, Vol.94, pp.199-214.
8. A Gautami, S priya, S Mythili, S.Baskar, “Design and implementation of corrugated circular loop antennas in wireless power transfer technology”, The IIOAB Journal, 2018, Vol.9, pp.26-29.

2017

1. P.Murugapandiyan, S.Ravimaran, J.William, J.Ajayan, D.Nirmal,”DC and microwave characteristics of 20 nm T-gate InAlN/GaN high electron mobility transistor for high power RF applications”, Superlattices and Microstructures, 2017, Vol.109, pp.725-734.
2. Betty Paulraj, Mohana Geetha D and Jeena Jacob I, “An efficient biometric feature extraction using CBIR”, Biomedical Research, 2017, Vol.28, No.14, pp.6181-6189.
3. Deepa R, Shanmugam A, Sivasenapathi B, “Reasoning of EEG waveform using revised principal component analysis

2018

  1. Ramakrishnan C, “Voltage sensorless controller for photovoltaic shunt active power filter for enhancement of power quality,” International Journal of Testing and Evaluation, 2018, vol.46 , no.1 , pp.252-265.

2017

  1. Ramakrishnan C, “Performance Analysis of voltage stateless controller for Renewable Energy supported shunt active power filter,” International Journal of Testing and Evaluation, 2017, vol.45 , no.3 , pp.1-14.

2016

  1. ChenthurPandian S, “Hybrid cluster based geographical routing protocol to mitigate malicious nodes in mobile and adhoc network,” J. Ad Hoc and Ubiquitous Computing, 2016, vol.21 , no.4 , pp.224-236

2015

  1. ChenthurPandian S, “Investigation of Attribute aided data aggregation over dynamic routing in wireless sensor networks,” Journal of Engineering Science and Technology, 2015, vol.10 , no.11 , pp.1465-1476.

2017

1.JT Thirukrishna, S Karthik, VP Arunachalam,”evamp energy efficiency in Homogeneous Wireless Sensor Networks using Optimized Radio Energy Algorithm (OREA) and Power-Aware Distance Source Routing protocol”,Future Generation Computer Systems ,Elsevier,2017,vol.81,pp.331-339.

2016

  1. Sabitha, R Karthik, S.; Shanthini, J, “Breast Cancer Detection Using Enhanced Descriptive Approach “,Journal of Medical Imaging and Health Informatics, American Scientific Publishers,2016,vol.8,no.8,pp.1887-1892.

2018

1.J Ajayan, T Ravichandran, P Mohankumar, P Prajoon, JC Pravin,”Investigation of DC-RF and breakdown behaviour in Lg= 20 nm novel asymmetric GaAs MHEMTs for future submillimetre wave applications”,AEU-International Journal of Electronics and Communications ,2018,vol.84,pp.387-393

2.J Ajayan, D Nirmal, T Ravichandran, P Mohankumar, P Prajoon, L Arivazhagan, Chandan Kumar Sarkar,”InP high electron mobility transistors for submillimetre wave and terahertz frequency applications: A review”,AEU-International Journal of Electronics and Communications,2018,vol.94,pp.199-214

2018

  1. Tamilselvam, c.chinnasamy, R.Ranjith,”Environmental effects of adding aluminium oxide nano additives on diesel engine fueled with pyrolysed biomass oil – diesel blends “,Energy sources , part A : recovery, utilisation and environmental effects ,2018,vol. 40,no. 22,pp. 2735-2744.
  2. Ranjith,”Frictional Behaviour of the AA7050/B4Cp Aluminium Composites”, Composites: Mechanics, Computations,2018,vol. 9,no. 1,pp. 17-25.

 2017

  1. R Dharmalingam, R.Kandasamy, K.K.Sivagnana Prabhu,”Lorentz Forces and Nanoparticle Shape on Water based Cu, Al2O3 and SWCNTs”,International Journal of Molecular Liquids,2017,vol.231,pp. 663-672.
  2. Senthil Kumar C,” Experimental Studies on Heat Transfer Characteristics of SS304 Screen Mech Wick Heat Pipe”,Society of Thermal Engineers of Serbia,2017,vol. 21,no. 2,pp. 497-450.
  3. Ranjith,”Influence of Titanium – coated (B4Cp+SiCp) particles on sulphide stress corrosion and wear behaviour of AA7050 hybrid composites (for MLG Link) “, Journal of Australian Ceramic Society,2017,vol. 53,no. 2,pp. 1017-1025.

2015

  1. Dharmalingam, K.K.Sivagnanaprabhu, J.Yogaraja, S.Gunasekharan, R.Mohan,”Experimental Investigation of Heat Transfer Characteristics of Nano Fluid Using Parallel Flow, Counter Flow and Shell and Tube Heat Exchanger”,International Journal of Archive of Mechanical Engineering,2015,vol. 62,no. 4,pp. 509-522.

2018

  1. G.Saravanaraj and SruthiPillai, “Exploring the factors of green advertising that entices purchase behaviour among Bangaloreans”, International Journal of Business Excellence, Jan 2018, vol. 14, no. 2, pp. 275-283.

2018 – PHY

  1. Naresh Kumar, K.Sakthivel, V. Balasubramanian, D. Sengottaiyan and J.Suresh, “Microwave assisted green synthesis of ZNO nanorods for dye sensitized solar cell application”, Indian Journal of Chemical Technology, vol. 25, no. 4, pp. 383-389, Apr. 2018.

2017- PHY

  1. Balasubramanian, P.Naresh Kumar and D.Sengottaiyan, “Effect of deposition temperature on structural, optical and electrical properties of copper bismuth sulphide thin films deposited by chemical bath deposition”, Material Science-Poland, vol. 35, no. 2, Jul, 2017.
  2. N.Kumar, K. Sakthivel and V.Balasubramanian,”Microwave assisted bio synthesis of rice shaped ZnO nanoparticles using Amorphophallus konjac tuber extract and its application in dye sensitized solar cells”, Materials Science-Poland, vol. 35, no. 1, pp. 111-119, Mar, 2017.

2015- PHY

  1. Naresh Kumar and K.Sakthivel,”Preparation and Characterisation of low cost prussian blue sensitized solar cell”, Journal of Ovanic Research, vol. 11, no. 4 , pp. 169-173, Aug, 2015.

2018 – CHE

  1. Suresh, G.Pradheesh, V.Alexramani, M.Sundarrajan, S.I.Hong, “Green synthesis and characterisation of hexoganol shaped MgO nanoparticles using insulin plant (Costus pictus D.Don) leave extract and its antimicrobial as well as anticancer activity”, Advanced Powder Technology, vol. 29, no. 7, pp. 1685-1894, Jul. 2018.
  2. Kanagamani, P.Muthukrishnan, M.Illayaraja, K.Shankar and A.Kathiresan, “Synthesis, Characterisation and DFT Studies of stigmasterol medidated Silver nano particles and their Anticancer Activity”, Journal of Inorganic and Organomettalic Polymers and Materials,vol. 28, no. 3, pp. 702-710, Mar. 2018.
  3. Manjuladevi, R.Anitha and S.Manonmani,”Kinetic study on adsorption of Cr(VI), Ni(II), Cd(II) and Pb(II) ions from aqueous solution using activated carbon prepared from Cucumis melo peel”, Applied Water Science, Vol. 8, No. 1, pp. 1-6, Mar, 2018.

2017 – CHE

  1. Kanagamani, P.Muthukrishnan, M.Illayaraja, K.Shankar and A.Kathiresan,”Synthesis of Leucaena medidated silver nano particles Assesing their photocatalytic degradation of Cr(VI) and in vitro cytotoxity against DLA cells”, Journal of Photochemistry and Photobiology A: Chemistry, vol. 346, pp. 470-478, Sep. 2017.

Publications in UGC / Google Scholar

YearPaper details
2019-2020N.Venkatesh, S. Gopikannan, V.Harish and V. Kavin, “Estimation of Mechanical Properties of Water Augumented Pulse Jet Engine,” 2020 International Journal of Advanced Research (IJAR), Coimbatore,Int. J. Adv. Res. 8(03), 747-755
2018-2019Nehru K, Published International Journal entitled on “DESIGN AND ANALYSIS OF HONEYCOMB HELMET FOR SPORTS TWO WHEELER RIDERS”, Published in International Journal of International Research journal of Engineering and Management Studies (IRJEMS), e-ISSN: 2395-0126. Volume: 03 Issue: 04 | April -2019.
 Venkatesh N, Muneeswaran M, Vignesh.D, Muthamizh.M “Non Linear Analysis Of Snap Lock For Aircraft Seat Belt” International Journal of Scientific Development and Research,Coimbatore,Int. J. Adv. Res. 8(03), 148-152
S.N.LOGU, K.NEHRU, B.GOBIKA, M.VEERASOUNDHARY ” DESIGN AND ANALYSIS OF PLIANT WING” International Research Journal of Engineering and Technology (IRJET), Volume: 06 Issue: 03, PP 4007- 4011, e-ISSN: 2395-0056, p-ISSN: 2395-0072,  Mar 2019
Nehru K, Published International Journal entitled on “DESIGN AND ANALYSIS OF PLIANT WING”, Published in International Research Journal of Engineering and Technology (IRJET), e-ISSN: 2395-0056, p-ISSN: 2395-0072, Volume: 06 Issue: 03 | Mar 2019.
M.Sasi kumar Published a Paper on “Design, Fabrication and Testing of a Remote – Controlled Airplane with High – Payload Ratio” in INTERNATIONAL JOURNAL OF CREATIVE RESEARCH THOUGHTS  6 (Issue 2), 353-357
Nehru K, Published International Journal entitled on “DESIGN AND ANALYSIS OF LANDING GEAR FOR ESTIMATE MECHANICAL PROPERTIES”, Published in International Journal of Emerging Technologies and Innovative Research (ISSN: 2349-5162) ISSN UGC Approved & 5.87 Impact Factor, Volume 06 Issue 03, March-2019
M.Sasi kumar  Published a Paper on “Design and Performances Analysis of Micro Turbine in Turbojet Engines” in INTERNATIONAL JOURNAL OF CREATIVE RESEARCH THOUGHTS  6 (2320-2882), 345-352
 Venkatesh N, Nehru K, Vishnu Varthan S, Hariharasudhan, R Siva ponnesh.B.G  “Design and Analysis Of Landing Gear For Estimate Mechanical Properties” Journal of Emerging Technologies and Innovative Research (JETIR),Vol 6 Issue No 3 Page no 420-424
2017-2018S.N Logu, V.David, J.Daffodil Carmel, G.Vinodha, S.Manibharathi ” DESIGN AND FABRICATION OF RC PLANE WITH FLEXIBLE WINGS” International Journal of Advance Engineering and Research Development, Volume 5, Issue 03, PP 1438- 1442,  e-ISSN (O): 2348-4470, p-ISSN (P): 2348-6406, March 2018
S.N.Logu, SRIVIDHYA S, ” SLATS A prominent noise reducer” INTERNATIONAL JOURNAL OF SCIENCE AND INNOVATIVE ENGINEERING & TECHNOLOGY”,VOLUME 2, PP 1-11 ISBN No. 978-81-923607-3-7, MAY 2018
Nehru K, Published International Journal entitled on “OPTIMAL LOCATION OF PIEZOELECTRIC PATCHES FOR VIBRATION CONTROL USING HARMONIC ANALYSIS IN AIRCRAFT WING”, Published in International Journal of Advanced Engineering and Research Development(IJAERD), e-ISSN: 2348-4470, p-ISSN: 2348-6406(UGC Approved), Volume 05 Issue 03.03.2018
Venkatesh N Mohankumar M , Krishna Gupta K, Tamizharasan T  “Bird strike analysis on jet engine fan blade” International Journal of Advanced Reaserch and Development, Vol 3 Issue No 4 Page no 144-149
Nehrukrish Venkatesh.N, Muneeswaran.M  “Design and Optimization of the Effect of Base Bleed on Thrust of A Truncated Spike Nozzle” International Journal of Engineering Science and Computing, Vol 7 Issue No 9 Page no 14807-14810
2016-2017S.N.Logu,R.Karthika,S.Gowtham,B.Arunkumar &V.Janani “Analysis of 2-Dimensional Hypersonic  Waverider”Imperial Journal of Interdisciplinary Research (IJIR),Vol-3, Issue-4, PP 1408- 1411 ISSN: 2454-1362, March 2017
M. Sasi Kumar  “Design and Performance Analysis of Hypersonic Inlet in Scramjet Engine” in International Conference on Mechanical and Building Sciences
 M.Sasi Kumar “Numerical Simulation Over A 2d Compression Ramp” in International Conference on Emerging Techniques in Engineering, Science & Management
Nehru K, Published manuscript entitled with “CFD ANALYSIS OF TANDEM WINGED AIRCRAFT”, in international journal of engineering research and reviews (IJERAR), on 06.01.2017.
Nehru K, Published journal entitled with “PERFORMANCE ANALYSIS OF SCRAMJET INLET”, in Imperial Journal of Interdisciplinary Research (IJIR) on Mar 2017.
Nehru K, Presented a paper entitled “NUMERICAL ESTIMATION ON JETS ACOUSTIC CHARACTERISTICS OF CHEVRON NOZZLES”, in the national conference on aeronautical and mechanical engineering NCAME2017, held at KCG College of Technology Chennai on 24.03.2017.
Dr.G.Manikandan, V.Rajashree, Design and performance Analysis of Spiroid winglet with normal wing, Imperial journal of interdisciplinary Research, Vol.03 issue 4, 2017
L.Hariramakrishnan, Lift Enhancement over an Aerofoil surface by Circulation Control International Journal for Scientific Research & Development, Vol.05 issue 2, 2017
L.Hariramakrishnan, CFD Analysis of VTOL Delta wing UAV, International Journal of Modern Trends in Engineering and Science, Vol.04 issue 3, 2017
2015-2016Mr.M.Sasi Kumar, Mr.R.Santhanakrishnan, Mr.S.Karthickram, Numerical simulation over a typical launch vehicle with protrusion, ARPN journal of Engineering and applied sciences, Vol.10 No.13, 2015
Mr.K.Nehru, Computational study of Mechanical Thrust Vectoring, International journal of research in Aeronautical and Mechanical Engineering, Vol.03 issue 10, 2015
Mr.G.Madhan Kumar, Numerical Simulation of Inlet for Turbine Assisted Ramjet, International journal of Research in Engineering & Technology (IJRET), Vol.04 issue 12, 2015
YearPaper details
2019-20A. Karthi, “Design and Fabrication of an Electric Bike”, International Research Journal of Engineering and Technology-ISSN No: 2395-0072, Issue 02, Volume 07, pp. 2377 – 2383, February 2020. (UGC Approved).
D. Rajesh Kumar, “Alternative Power Source Engine”, International Research Journal of Engineering and Technology-ISSN No: 2395-0072, Issue 02, Volume 07, pp. 2390 – 2397, February 2020. (UGC Approved)
 K. Senthil Kumar, “Lubricating Oil Condition Monitoring System in Dashboard”, International Research Journal of Engineering and Technology-ISSN No: 2395-0072, Issue 03, Volume 07, pp. 2400 – 2407, March 2020. (UGC Approved)
 P. Leon Dharmadurai, “Design and Modification of Dump truck to avoid accidents due to Protruded rods and to Reduce Material theft”, International Research Journal of Engineering and Technology-ISSN No: 2395-0072, Issue 03, Volume 07, pp. 2866 – 2870, March 2020. (UGC Approved)
M.N. Kailash, “Design and Analysis of Lower control arm in front Suspension system”, International Journal for Science and Advance Research in Technology-ISSN No: 2395-1052, Issue 03, Volume 06, pp. 417 – 421, March 2020. (Online Journal)
 N. Kumaresan, “Electromagnetic accident avoiding system”, International Research Journal of Engineering and Technology-ISSN No: 2395-0072, Issue 04, Volume 07, pp. 1165 – 1170, April 2020. (UGC Approved)
V. Rajesh, “Design and Fabrication of Excavator assist with wheels”, International Research Journal of Engineering and Technology-ISSN No: 2395-0072, Issue 04, Volume 07, pp. 6558 – 6565, April 2020. (UGC Approved)
V. Rajesh, “Onboard Charging System for Electric Vehicle”, International Research Journal of Engineering and Technology-ISSN No: 2395-0072, Issue 05, Volume 07, pp. 2166 – 2170, May 2020. (UGC Approved)
YearPaper details
2017-2018Arun Kumar.P “Design and Fabrication of a Pneumatically Operated Wheelchair Ambulated Stretcher”, International Journal for Research in Applied Science & Engineering Technology, ISSN: 2321-9653, Vol no.6, pp 1657-1660, Issue no. 2, February 2018
2017-2018S. Poornachandra, “Automated DR and prediction of various related diseases of retinal fundus images”, Journal of Biomedical Research, Special issue: Artificial Intelligent techniques for biomedical signal processing – II, ISSN: 0970-938X, Vol no.29, pp 325-332, January 2018.
2017-2018S. Poornachandra, “IoT based Intelligent Bin for Smart Cities using Raspberry Pi”, International Journal for Research in Applied Science & Engineering Technology, ISSN: 2321-9653, Vol no.6, pp 2443-2446, Issue no. 2, February 2018.
2017-2018V.S. Jagadhish, “Automated Board Duster”, International Journal for Research in Applied Science & Engineering Technology, ISSN: 2321-9653, Vol no.6, pp 1743-1750, Issue no. 3, March 2018
2018-2019Dr.K.Yasoda et.al., “Brain Computer Interface For Evaluation of Mild Cognitive Impairment Using Eye Blind” in the International Conference on Future Internet Systems and Applications –ICFISA-2018,Kuala Lumpur, Malaysia ,10.12.2018
2018-2019Mr. V.S.Jagadhish et.al., “Wireless wearable orthopedic device for posture monitoring during fracture healing period”in the International Conference on new scientific creations in engineering and technology at Nadar saraswathi college of engineering and technology,theni on  22.03.2019.
2018-2019A.Diana Chris, “A Proactive system to prevent presuure ulcer acquired via prolonged hospitalisation” in the International Conference on new scientific creations in engineering and technology at Nadar saraswathi college of engineering and technology, theni on 22.03.2019.
2018-2019Dr. Sree Niranjanaa Bose S “Automatic Regulation and Monitoring of CPM Machine”, in International Conference on Innovations in Engineering, Science and Technology (ICIEST 2019), Kalasalingam University on 15.02.2019.
2018-2019P. Arunkumar “Multiplexer Curator Device in Plight Conditionusing smart system” in International Conference on Innovations in Engineering, Science and Technology (ICIEST 2019), Kalasalingam University on 15.02.2019.
2019-2020Yasoda, K.,”Automatic detection and classification of EEG artifacts using fuzzy kernel SVM and wavelet ICA” (WICA). Soft Comput (2020)
2019-2020Arun Kumar P, “Intelligent Wheelchair For Propagation Using Voice Processing With Easy Procureability”, International Journal of Electrical Engineering and Technology (IJEET)Volume 11, Issue 2, March-April2020, pp. 219-225.
2019-2020Arun Kumar P, Automated Prostheticdevice For Amputees Controlled By The Functional Crus”, International Journal of Electrical Engineering and Technology (IJEET)Volume 11, Issue 2, March-April2020, pp. 226-234.
2019-2020Diana Chris A published a paper titled, “Spectral Analysis of Cardiotocographic Recordings For Fetal Distress” in International e-Conference on Recent Trends in Electronics, Computing and Communication Engineering organized by Institute of Electronics and Communication Engineering, Saveetha School of Engineering, Chennai on 15th and 16th June 2020
2020-2021G. L. Karthik “Artificial Sleep Inducer by Generating Electromagnetic Waves” in Mukt Shabd Journal, ISSN NO: 2347-3150, Volume IX, Issue VI, JUNE/2020.
YearPaper details
2016-2017M.Manjuladevi, J.Krishnaveni, S.Manonmani,” Removal of Nickel(II) from aqueous solution by adsorption onto Nano adsorbent prepared from Cucumis melo peel”,  Internal journal of Chem tech research,  Vol.10,No.14, pp 337-344, 2017.
2016-2017K. Kanagamani, P. Muthukrishnan,M. Ilayaraja,K. Shankar,A. Kathiresan,Synthesis, Characterisation and DFT Studies of
Stigmasterol Mediated Silver Nanoparticles and Their Anticancer Activity,J Inorg Organomet Polym,Volume 27,pp 1-314,ISSN 1574-1443,October 2017
2017-2018K. Kanagamani, P. Muthukrishnan, M. Ilayaraja, J.Vinoth kumar, K. Shankar, A. Kathiresan,Synthesis of Leucaena mediated silver
nanoparticles: Assessing their photocatalytic degradation of Cr (VI) and in vitro cytotoxicity against DLA cells,Journal of
photochemistry and photobiology A Chemistry,Volume 346,pp 470-478,September 2017
2018-2019J.Manivannan, S.Kalaiselvan, N.Velmani ‘Comparative Study of Polyol with varying Hydroxyl Value in Polyurethane Coatings
‘ International Journal For Research in Engineering Applications & Management : ISSN :2454-9150, Vol 04, Issue-04 Year 2018
2018-19S.Kalaiselvan,N.Mathankumar & J.Manivannan ‘ Production of Multilayered Nanostructure from Zingiger Officinate by Spray
Pyrolysis Method’ Global Journal of Science Frontier Research: Chemistry Vol 18, Issue 3 version 1.0 Year 2018
2018-2019M.Manjuladevi, R.Anitha, S.Manonmani,”Kinetic study on adsorption of Cr(IV),Ni(II),Cd(II) and Pb(II) ions from  aqueous solution using activated carbon prepared from  Cucumis melo peel”,  Appilied water science, Vol.8, no.36,pp 1-36, 2018.
2018-2019K. Kanagamani, P. Muthukrishnan, Saravanakumar.K, K. Shankar, A. Kathiresan,Photocatalytic degradation of environmental
perilous gentian violet dye using leucaena-mediated zinc oxide nanoparticle and its anticancer activity,Rare metals,38,
pp 277-286,January 2019
2018-2019J.Suresh, G.Pradheesh, V.Alexramani, M.Sundrajan, S.I Hong,”Green synthesis and characterization of  hexagonal shaped MgO nanoparticles using insulin plant(Costus pictusD.Don)  leave extract and its antimicrobial as well as anticancer activity:,Advanced powder technology,Vol.29,No.7, pp.1685-1694, 2018.
2018-2019J.Suresh, G.Pradheesh, V.Alexramani, M.Sundrajan, S.I Hong,”Green synthesis and characterization of zinc oxide nanoparticle using insulin plant(Costus pictusD.Don)  leave extract and its antimicrobial as well as anticancer activity”, Advances in natural science: nanoscience and nanotechnology,Vol. 9, No.1, 15008-15020, 2018.
2018-2019J.Suresh, G.Pradheesh, V.Alexramani,S.I Hong,”Phytochemical screening characterization and antimicrobial,  anticancer activity of biosynthesised zinc oxide nanoparticle using Cyathea nilgiriensis holttum plant extract”,Journal of bioscience,Vol.12,No. 1,  pp37-48, 2018.
2018-2019R.Mahalakshmi, D.Kalaiselvi, M.Manjuladevi, K.Karthik, K.Rathina Ramalatha Marimuthu,”Adsorption Behaviour of Chemically Modified Cellulose Bearing Benzothiazole Chelating group towards Lead Ions from water bodies”, RASĀYAN Journal of Chemistry, Vol.12,pp 20,2019.
2018-2019P.Geethamani,M.Narmatha,R.Dhanalakshmi, S.Aejitha,P.K.Kasthuri,” Corrosion Inhibition And Adsorption Properties Of Mild Steel  In 1m Hydrochloric Acid Medium By Expired Abroxol Drug”,Journal f bio tribo corrosion,vol5,no16,pp 28,2019.
2019-20J.Manivannan , S.Kalaiselvan, N.Velmani ‘Study of Epoxy – Isocyanate Coating System for High Performance Application in
Chemical Industries’ GEDRAG &ORGANISATE  0921-5077 Vol 33 Issue 02 2020  (Web of Science)
2019-20S.Kalaiselvan, R.Padmavathi & J.Manivannan ‘Parametric Evaluation of Multiwalled Carbon Nanotube Synthsised from Used
Cooking Oil by Catalyst Assisted Spray Pyrolysis method’ GEDRAG & ORGANISATE Vol 33 Issue 03 2020 (Web of Science)
2019-2020K. Kanagamani, P. Muthukrishnan, K. Shankar, A. Kathiresan,Hamad Barbadi,M.Sarvannan,Antimicrobial, Cytotoxicity and
Photocatalytic Degradation of Norfloxacin Using Kleinia grandiflora Mediated Silver Nanoparticles,Journal of cluster science,
30,pp 1415-1422,May 2019
2020-2021G.Pradheesh et al, Antimicrobial and Anticancer Activity Studies on Green  Synthesized Silver Oxide Nanoparticles from the
Medicinal Plant,  International Journal of Pharmaceutical Investigations,10(2),pp 146-150,June 2020.
2020-2021G.Pradheesh et al,Antimicrobial and anticancer activity studies on green synthesized copper oxide nanoparticles from the medicinal plant Cyathea nilgiriensis Holttum,International Journal of Biology, Pharmacy and Allied Sciences, 9(6),pp 1443-1459,June 2020.
YearPaper details
2018-19Mr.P.Selvaprashanth, ‘Development of light weight concrete using pumic stone’, IRJET Research Journal of Engineering and Technology , vol. 6, issue 2, February 2019 no. 393 pp.23950056 ISSN : 1819-6608.
2018-19Mrs.M.Indumathi 2019, ‘Soil stabilization using tannary waste’, IRJET Research Journal of Engineering and Technology, vol. 6, no. 400 pp.2395-0056 ISSN : 2395-0072
2018-19Ms.P.Srishadurya 2019, ‘Experimental study on High Volume Flyash concrete’, IRJET Research Journal of Engineering and Technology (Annexure-II), vol. 6, issue 2, February 2019 no. 397 pp.2395-0056 ISSN : 2395-0072
2017-18R.Anuradha,  C.Arulprakash, “Investigation on Strength Properties of Concrete with Partial Replacement of Cement by Marble Powder and Fine Aggregate by Granite Powder”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 27-34, 2017.
2017-18Chinnadurai P, Anuradha R, “A Study on Mechanical Properties of Concrete using Hair IBRE Reinforced Concrete”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 167-176, 2017.
2017-18 R.Anuradha, A.Gilbert Immanuel, “Strength Properties of Concrete with Partial Replacement of Cement by Flyash and Fine Aggregate by Granite Powder”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 238-244, 2017.
2017-18R.Anuradha, Keerthi Kumar B,Karthik K.M, “Flexural Studies on Reinforced Concrete Beams with Glass Fiber Reinforced Polymer”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 250-258, 2017.
2017-18 R.Vennila, R.Anuradha, S.Kavitha, “Compressive Strength on Interlocking Concrete Blocks With Acacia Nilotica Ash and Broken Tiles”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 355-358, 2017.
2017-18 R.Kumaresan, R.Anuradha, S.Kavitha, A.Varadharaj, “Flexural Behavior of Reinforced Steel Slag Concrete Beamsusing Finite Element Analysis”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 348-354, 2017.
2017-18R.Anuradha, S.Kavitha, V.Niranjan, “Retrofitting of solid waste based RC beams using CFRP laminates”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 359-366, 2017.
2017-18R.Anuradha, Kishore Krishnan, “Behavioural Approach of Concrete Prisms with Replacement of Reinforcement by Wiremesh”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp226-231, 2017.
2017-18S. MuthuPackiaraj, R.Anuradha, “Experimental Investigation on Glass Fibre Reinforced Concrete Containing E Plastic Waste”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp60-64, 2017.
2017-18Muthuraman, R.Anuradha, BlessyJothi, K.Venkatraman, L Yadheeswaran A, Kishore .R, M.Mathavan, “Enhancing the Strength properties of Recycled Aggregate Concrete by Experimental Investigation”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp465-473, 2017.
2017-18M.Muthuraman, R.Anuradha, “Numerical Study of Cold-Formed Steel Built-Up Battened Columns Under Axial Compression”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp01-06, 2017.
2017-18Muthuraman P, AnushiyaKumari , Durka Devi A, JebaJeslin A ,Rebeckal J , R.Anuradha, “Experimental study on water quality assessment and improvement of Thamirabarani river course”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp474-484, 2017.
2017-18A.Panimayam, P.Chinnadurai, R.Anuradha, Rajalingam.M, Ajith Raj, Godwin, “Experimental Study of Pervious Concrete using M-Sand”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp186-198, 2017.
2017-18 Panimayam. A, Chinnadurai. P, R.Anuradha, “Review Article on Assets of Carbon Fiber Reinforced Polymers”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp199-210, 2017.
2017-18A.Panimayam, P.Chinnadurai, R.Anuradha, K.Pradeesh, A.UmarJaffer, “Utilisation of Waste Plastics as a Replacement of Coarse Aggregate in Paver Blocks”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp211-218, 2017.
2017-18 A.Panimayam, P.Chinnadurai,  R.Anuradha, M. Angel Benish,B. BanishaShelas, “Experimental Analysis of Earthquake Resistant Structures with Shear Wall”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp177-185, 2017.
2017-18M.Priyanga, P.Srishadurya, R.Anuradha, “Analysis of Ground Water Quality in RamanathapuramMunicipality”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp573-579, 2017.
2017-18M.Priyanga, P.Srishadurya, R.Anuradha, “Assessment of Ground Water Quality in RamanathapuramMunicipality using Geographical Information System (GIS)”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp580-588, 2017.
2017-18P.Srishadurya1, M.Priyanga1, R.Anuradha, “Experimental Investigation of Strength Characteristics on Beams using Plastic”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 403-408, 2017.
2017-18Muthuraman P, Shiny K, R.Anuradha, “Enhancement of Mechanical Behaviour of Self CuringConcrete with Partial Replacement of Fine Aggregate byusing Quarry Dust”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 485-489, 2017.
2017-18SrinivasPrabhu .R ,Anuradha.R, “Durability Studies on Concrete by using Plastic Waste”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 634-644, 2017.
2017-18 K.Thangapandi, R.Anuradha, J.Swart Singh, G, Muthuselvan, A.AgnelKristan, T.Heartly Maxton Rodrigo, “An Experimental Study on Performance and Durability ofHardened Concrete using Alccofine and Copper Slag”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 507-516, 2017.
2017-18P. Tharani , B. Ajay Adithiya , K. Murali, “Experimental Study On Concrete With Bauxite Residue As Partial Replacement Of Cement” International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 35-41, 2017
2017-18Anitha Selvasofia ,Anitha .B ,Pragati .S ,Shantha Shree.K “Modern Traffic Management Techniques For National Highways” , International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 35-41, 2017
2017-18 Anitha Selvasofia,Fayas .M ,Gowtham.G  ,Sanjeev Kumar.N “Study Of Underground Water Quality Using GIS” , International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 35-41, 2017
2017-18Anitha Selvasofia.S.D , Prince Arulraj.G ,  Srisanthi.V.G  “A GIS Based Traffic Congestion Evaluation For Coimbatore City” , International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 35-41, 2017
2017-18Anitha Selvasofia,Raj Kannan.R  ,Sivashankaran.R, Venkadesh.K,Lakshmi ,Narayanan.M, Lawrence.P, “Utilization Of Pervious Concrete In Rainwater Harvesting With Partial Addition Of Glass Powder” , International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 35-41, 2017
2017-18A.J.R. Divya Dharani,S. Menaka,,P.M.Arafat Bilal, “ Experimental Investigation on Strength And Durability Characteristics Of Flyash Concrete By Incoroprating Electric Arc Furnace Dust” International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 688-694, 2017
2017-18O.R.Kavitha, K.C.Nandhinipriya  “A Effect Of Bottom Ash As A Mineral Admixture In Concete, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 134-139, 2017
2017-18O.R.Kavitha,A, J.Kiruba Parvathy, “ Study On Strength Property Of Concrete Using Hypo Sludge And Waste Foundry Sand, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 140-145, 2017
2017-18Kavitha. O. R, Prem Kuriakose, Pradeep.C.K.,Shibu.K “Experimental Study Of Replacement Of Coarse Aggregate With Palm Shell” International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 568-572, 2017
2017-18 S.Krishnapriya ,  Shahin Rahman K P “Effect Of Using Bacteria In Different Combinations In Concrete International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 232-237, 2017
2017-18K. Arumugam , M.Ramya devi  “A Study On Strength Properties Of High Performance Concrete With Partial Replacement Of Cement With Silica Fume And Fine Aggregate With Pond Ash In Concrete” International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 307-313, 2017
2017-18M.Deepika Sree,G.Gowthama Raja,K.Kamesh Kumar,R.Prabhakaran “ Experimental Investigation On Replacement Of Course Aggregate By Shredded Rubber Tyre” International Journal of ChemTech Research, ISSN: 0974-4290,ISSN(Online):2455-9555, Vol.10 No.8, pp 670-676, 2017
2017-18Sasikala , Dr.S.Kandasamy “Behaviour Of Brick Masonry By Using Cement Lime Mortar With Chemical Admixture” International Journal of ChemTech Research, ISSN: 0974-4290,ISSN(Online):2455-9555, Vol.10 No.8, pp 750-756, 2017
2017-18 S. Sowbala,Dr. S. Kandasamy “Experimental Study On Bond Strength Of Masonry By Using Cement Mortar With Chemical Admixture” International Journal of ChemTech Research, ISSN: 0974-4290,ISSN(Online):2455-9555, Vol.10 No.8, pp 757-764, 2017
2017-18A.R.Krishnaraja,S.Kandasamy “ Mechanical Properties of Engineered Cementitious Composites” International Journal of ChemTech Research, ISSN: 0974-4290,ISSN(Online):2455-9555, Vol.10 No.8, pp 341-347, 2017
2017-18R.M.Karthikeyan,Praveen Kumar,R.Srinath Sharvin,G.Vignesh “ Experimental Investigation on High Strength Pervious Concrete with Partial Replacement of Coarse Aggregate by Marble Aggregate” International Journal of ChemTech Research, ISSN: 0974-4290,ISSN(Online):2455-9555, Vol.10 No.8, pp 42-47, 2017
YearPaper details
2016-20171.      Ms.S.Indhurekha,” Attendance system using Beacon Technology”, International Journal of Research in Computer Science Volume 4, Issue 1, ISSN: 2349-3828,pp 33-35,January 2017 International Journal of Scientific & Engineering Research Volume 8, Issue 5, ISSN 2229-5518,pp38-42,May 2017.
2.      Mrs.R.Roopa Chandrika,”Simplified Contrast Enhancement Fuzzy Technique in Digital Mammograms for Detecting Suspicious cells”, Journal of Medical Imaging and Health Informatics, Volume 7,Issue 2,ISSN:2156-7018,pp 1-7,April 2017.
3.      Mr.J.Alfred Daniel, ”Big Autonomous Vehicular Data Classifications: Towards procuring intelligence in ITS”, Vehicular Communications, Volume 1,Issue 211,ISSN:2214-2096,pp 1-7,March 2017.
4.      Ms.V.Praveena,Dr.S.Karthik,Dr.R.Sabitha,” Defense against DDOS Attack using Passive IP Traceback and Quantum Annealing”, Asian Journal of Research in Social Sciences and humanities, Volume 7,Issue 3,ISSN:2249-7315,pp 247-263,doi: 10.5958.2017.00065.1,March 2017(UDPATED LIST JOURNALS).
5.      Ms.B.Vinodhini,Dr.S.Karthik,” Assuring Quality of Service for Packet Scheduling Using Scattered Routing Scheme in Mobile Ad Hoc Networks”, Asian Journal of Research in Social Sciences and humanities, Volume 7,Issue 1,ISSN:2249-7315,pp 1006-1016,doi: 10.5958.2017.00065.1,March 2017.(UDPATED LIST JOURNALS).
6.      MsT.Sivaranjini,”Lowering the barrier to improve performance in hybrid wireless networks”, International Journal of Research in Computer Science Volume 4, Issue 1, ISSN: 2349-3828,pp 33-35,January 2017.
7.      Ms.R.Monisha,”Study on Anonymization Techniques for Privacy Preserving Data Mining”, International Journal of Research in Computer Science Volume 4, Issue 1, ISSN: 2349-3828,pp 30-32,January 2017.
8.      Ms.S.Indhurekha,”Adaptive Position Update Based on Mobility Forwarding Node Selection in MANET”, International Journal of Research in Computer Science Volume 4, Issue 1, ISSN: 2349-3828,pp 24-29,January 2017.
9.      Mr.M.Karthick, Ms.M.Vaijayanthi, “Privacy Preservation in the Internet Telephony Calls”, International Journal of Research in Computer Science, Volume 4, Issue 1,ISSN:2349-3828,pp 4-8,January 2017.
10.  Ms.M.Vaijayanthi, Mr.M.Karthick, “Method Level Bug Prediction Using Information Gain”, International Journal of Research in Computer Science Volume 4, Issue 1,ISSN:2349-3828,pp 9-13,January 2017.
11.  Ms.S.Vaishnavi,Ms.M.Shobana,”Agricultural Data Mining”,International Journal of Advanced and Innovative Research, Volume 6,Issue 1,ISSN:2278-7844,pp 21-23,January 2017.
12.  Ms.S.Pushpalatha, ”Automated Detection of Severity of Diabetic Retinopathy Using Retinal Grading Algorithm” International Journal of Research in Computer Science, Volume 4,Issue 1,ISSN:2349-3828,pp 17-20,January 2017.
13.  Ms.M.Shobana,Ms.S.Vaishnavi ”Review of Smart Environment Development Using IoT”, International Journal of Research in Computer Science, Volume 4,Issue 1,ISSN:2349-3828,pp 21-23,January 2017.
14.  Ms.S.Jayasree,Ms.G.Gopika, ”TCP Variants in MANET –A Survey”, International Journal of Research in Computer Science, Volume 4,Issue 1,ISSN:2349-3828,pp 14-16,January 2017.
15.  Mr.S.Vinothkumar,Dr.S.Karthik ”Rule Based Image Extraction for Mining Images from Databases”, Asian Journal of Research in Social Sciences and humanities,Volume 7,Issue 1,ISSN:2249-7315,pp 1310-1318,doi: 10.5958.2017.00065.1,January 2017.(UDPATED LIST JOURNALS).
16.  Ms.S.Gomathi,Dr.S.Karthik “Performance Analysis of Adjusted Probabilistic Route Discovery Approach over Node Mobility in Mobile Adhoc Networks” International journal of Printing, Packaging and Allied Sciences, Volume 4,Issue 4,ISSN:2320-4387,pp 3998-4005,December 2016.(ANNEXURE I)
17.  Mr.C.Chandru Vignesh “Survey on Preventing the Password Hacking by Using the Loss Encryption”, International Journal of Scientific Research in Science, Engineering and Technology, Volume 2, Issue 6,pp 31-34,December 2016.
18.  Dr.Karthik.S “Integration of IoT on Smart Irrigation System”, International Journal of Advanced and Innovative Research, Volume 5,Issue 11,ISSN:2278-7844,pp 19-21,December 2016.
19.  Mr.C.B.Sivaparthipan, “Smart Energy Intelligent Resourceful Buildings Based on Internet of Things (IOT)”, International journal of Printing, Packaging and Allied Sciences, Volume 4,Issue 4,ISSN:2320-4387,pp 2463-2473,December 2016.(ANNEXURE I)
20.  Mrs.I.Kala, Dr.S.Karthik ”Region Based AODV Geographic Routing Protocol for Quasi MANET”, Asian Journal of Information Technology, Volume 15, Issue 22,ISSN:1682-3915,pp 4626-4634, December 2016.(UDPATED LIST JOURNALS)
21.  Dr.A.Chandrasekar ” A Survey of Black and Gray Hole Attacks in Wireless Mobile Ad Hoc Networks” , International Journal for Scientific Research & Development| Vol. 4, Issue 09,ISSN: 2321-0613,December 2016.
22.  Mrs.S.Dhanalakshmi,”Disclosure of Malevolent in MANET: A Survey”, International Journal for Research in Technological Studies, Volume 4,Issue 1,ISSN: 2348-1439,pp 31-34,December 2016.
23.  Dr.D.Prabakar,Dr.S.Karthik,” Detection of Exposed Terminal Problem in Wireless Networks – A Survey”, International Journal for Research in Technological Studies, Volume 4,Issue 1,ISSN: 2348-1439,pp 10-13,December 2016.
24.  Mrs.I.Kala,Dr.S.Karthik,” A Survey on Efficient Routing in VANET”, International Journal for Research in Technological Studies, Volume 4,Issue 1,ISSN: 2348-1439,pp 10-13,December 2016.
25.  Mrs.R.Roopa Chandrika “Sybil Attacks in P2P Networks: A Survey”,  International Journal for Research in Technological Studies, Volume 4,Issue 1,ISSN: 2348-1439,pp 6-9,December 2016.
26.  Dr.S.Karthik,R.Sabitha, ”Prioritized Scheduling with Adaptive Contention Window to Improve TCP Performance in MANET” International journal of Printing, Packaging and Allied Sciences, Volume 4,Issue 5,ISSN:2320-4387,pp 3862-3873,December 2016.(ANNEXURE I)
27.  Dr.V.P.Arunachalam,Dr.S.Karthik ”Mutitier Security Architecture with Energy Requirement for Medical Wireless Sensor Network”, International journal of Printing, Packaging and Allied Sciences, Volume 4,Issue 5,ISSN:2320-4387,pp 3885-3897,December 2016.(ANNEXURE I)
28.  Dr.S.Karthik, ”Adaptive Backoff Window to Improve TCP Performance in MANET”, International journal of Printing, Packaging and Allied Sciences, Volume 4,Issue 5,ISSN:2320-4387,pp 3874-3884,December 2016.(ANNEXURE I)
29.  Dr.S.Karthik, “Efficient Query formation to Information Retrieval and Exploration for Keyword Search in Relational Databases: The RDBMS Way” International journal of Printing, Packaging and Allied Sciences, Volume 4,Issue 5,ISSN:2320-4387,pp 3646-3655,December 2016.(ANNEXURE I)
30.  Dr.T.Kalaikumaran,Ms.G.S.Gopika,Dr.S.Karthik, ”Unsupervised Approach for the Revealing and Dissection of Brain Tumors Using Multi-Objective BAT Optimization Algorithm”, International journal of Printing, Packaging and Allied Sciences, Volume 4,Issue 5,ISSN:2320-4387,pp 3626-3636,December 2016.(ANNEXURE I)
31.  Dr.S.Karthik “The Enhanced Security Scheme for Network Protection Against Attacks Using Improved Mean Field GAME Theory (IMFGT) in MANET” International journal of Printing, Packaging and Allied Sciences, Volume 4,Issue 5,ISSN:2320-4387,pp 3535-3540,December 2016.(ANNEXURE I)
32.  Dr.B.Chellaprabha,Dr.S.Karthik “An Enhanced Clustering Algorithm for Reducing Transmission Loss and Delay in MANET”, International journal of Printing, Packaging and Allied Sciences, Volume 4,Issue 3,ISSN:2320-4387,pp 1697-1704,December 2016.(ANNEXURE I)
33.  Dr.S.Raja Ranganathan,Dr.S.Karthik “Non-Congestion Loss reduction in MANET Using Cluster Based Algorithm”, International journal of Printing, Packaging and Allied Sciences, Volume 4,Issue 3,ISSN: 2320-4387,pp 1589-1598,December 2016.(ANNEXURE I)
34.  Mr.C.B.Sivaparthipan “The Roadmap for Bigdata in Various Application with Apache Hadoop and Apache Spark”, International journal of Printing, Packaging and Allied Sciences, Volume 4,Issue 4,ISSN:2320-4387,pp 2497-2505,December 2016.(ANNEXURE I)
35.  Ms.K.Sangeetha, ”Certain Analytical Approaches to Predict the Dengue Fever Based on the Effects of Climate and Weather Changes”, International journal of Printing,Packaging and Allied Sciences, Volume 4,Issue 1,ISSN:2320-4387,pp 251-256,December 2016.(ANNEXURE I)
36.  Ms.V.Savitha, ”Recent Trends and Development in Cloud Computing”, International Journal of Advanced Research Methodology in Engineering and Technology,Volume 1,Issue 1,pp 93-100,December 2016
37.  Ms.S.Indhurekha,Mr.C.Chandru Vignesh ”Position Update For Geographic Routing in MANET”, International Journal of Advanced Research Methodology in Engineering and Technology, Volume 1,Issue 1,pp 151-160,December 2016.
38.  Mrs.K.Maheswari, ”Document Retrieval in Cloud”, International Journal of Advanced Research Methodology in Engineering and Technology, Volume 1,Issue 1,pp 145-150,December 2016.
39.  Ms.T.Sivaranjini,”Smart Control of Electronic Appliances and Digital Notice Board Using GSM and Bluetooth”,International Research Journal of Engineering and Technology,Volume 3,Issue 12,ISSN:2395-0072,pp 285-290,December 2016.
40.  Ms.S.Pushpalatha, ”A Survey on Breast Cancer Detection Techniques”,International Journal of Computer Science and Information Technologies, Volume 7,Issue 6,ISSN:0975-9646,pp 2445-2447,December 2016.
41.  Mr.M.Karthick, ”Minimizing Channel Interference in Wireless Networks during Disaster Response Operations”, International Journal of Computer Trends and Technology, Volume 41,Issue 1,ISSN:2231-2803,pp 22-25,November 2016.
42.  Mr.C.B.Sivaparthipan, ”A Survey on Big data Approach for Sentiment Analysis for Streaming Dataset”, International Journal of Engineering Science Invention Research and development,Volume 3,Issue 5,ISSN:2349-6185,pp 276-280,November 2016.
43.  Ms. V.Praveena, “New Technique To Detect DDoS Attack”, International Journal of Software & Hardware Research in Engineering, Volume 4 Issue 11, ISSN-2347-4890, pp. 15-20, November 2016.
44.  Mrs.S.Dhanalakshmi,”Automated Testing Tool for Different Coverage Metrics”,International Journal of Advanced and Innovative Research,Volume 5,Issue 10,ISSN:2278-7844,pp 120-123,November 2016.
45.  Ms.S.Vidya,”Cloud Surveillance Using SLAs”,International Journal of Advanced and Innovative Research,Volume 5,Issue 11,ISSN:2278-7844,pp 4-6,November 2016.
46.  Ms.S.Vidya,”Knowledge Based Resource Provision and Allocation in Cloud Using Auction Method”,International Journal of Advanced and Innovative Research,Volume 5,Issue 10,ISSN:2278-7844,pp 117-118,November 2016.
47.  Mr.R.Senthikumar,”Eliminating Risks in Uploading and Downloading Files from Cloud Using Steganography and Cryptography Techniques”,International Journal of Scientific Research in Science, Engineering and Technology,Volume 2,Issue 6,ISSN:2395-1990,pp 79-81,November 2016
48.  Ms.V.Savitha, ”Detecting and Eliminating Grey Hole Attack in Delay Tolerant Network”, Imperial Journal of Interdisciplinary Research”, Volume 2,Issue 12,ISSN:2454-1362,pp 1-4,October 2016.
49.  Mrs.P.Poonkodi,”Energy Conservation in Automatic Teller Machine Integrated with IVR Technology”, Advances in Natural and Applied Sciences, Volume 10, Issue 14,ISSN:1995-0772,pp 167-170,October 2016.(ANNEXURE II)
50.  S.Kavitha,”Survey on Connecting Social Media to E-Commerce:Cold-Start Product Recommendation Using Microblogging Information”, International Journal of Scientific Research in Science, Engineering and Technology, Volume 2,Issue 5,ISSN:2394-4099,pp 477-480,October 2016.
51.  K.Sangeetha,”Survey on Mining Shortest Path in Directed and Dynamic Graphs”,  International Journal of Scientific Research in Science, Engineering and Technology, Volume 2,Issue 5,ISSN:2394-4099,pp 431-437,October 2016.
52.  Ms.U.Supriya,”An Efficient Human Authentication Using Multibiometric Approach for High Accuracy in Recognition Rate”, International Journal of Scientific Research in Science, Engineering and Technology, Volume 2,Issue 5,ISSN:2395-1990,pp 364-368,October 2016.
53.  Mr.S.Vinoth Kumar,”Pattern Matching Algorithm for Providing Security and Recuding Power Consumption in Wireless Sensor Network”, International Journal for Research in Technological Studies, Volume 3,Issue 11,ISSN:2348-1439,pp 12-14,October 2016.
54.  Ms.P.Poonkodi, ”Survey on Secure Energy Efficient Cluster Optimization by Using Hierarchical Clustering Technique”, International Journal for Research in Technological Studies, Volume 3,Issue 11,ISSN:2348-1439,pp 15-17,October 2016.
55.  Mrs.M.Kavitha,Dr.S.Karthik,”Handling Selfishness False Alarm in Data Replica Allocation Method over MANET”, Asian Journal of Research in Social Sciences and humanities, Volume 6,Issue 10,ISSN:2249-7315,pp 162-178,doi: 10.5958.2016.01005.4,October 2016.(UDPATED LIST JOURNALS)
56.  Mrs.S.Vaishnavi, ”Survey on Crop Yield Prediction Using Agriculture Dataset”, International journal of Advanced and Innovative Research, Volume 5,Issue 10,ISSN:2278-7844,pp 13-16,October 2016.
57.  Mrs.K.Maheswari, ”An Improved SIP Protocol in Heterogenous Mobile Network for Efficient Communication”, Asian Journal of Research in Social Sciences and humanities,Volume 6,Issue 9,ISSN:2249-7315,pp 513-528,doi: 10.5958.2016.00754.1,September 2016.(UDPATED LIST JOURNALS)
58.  Mrs.M.Kavitha,Dr.S.Karthik ”An Efficient Selfish Node Detection and Data Replication Technique for Distributed Database in MANET ”, Asian Journal of Information Technology, Volume 15, Issue 14,ISSN:1682-3915,pp 2411-2419, August 2016.(UDPATED LIST JOURNALS)
59.  Mrs.K.Sangeetha,”A Supervised Hidden Markov Model with Guassian Output Distribution for Unstructured Medical Data Classification”, Journal of Computational and Theoretical Nanoscience, Volume 13,Issue 8,pp 1-7,doi:10.1166/jctn.2016.5439,ISSN:1546-1955,August 2016.(ANNEXURE-I)
60.  Dr.S.Karthik, ”Modified Clustering based Outlier Detection Algorithm for Market Data Analysis”, Asian Journal of Research in Social Sciences and humanities, Volume 6,Issue 8,ISSN:2249-7315,pp 2435-2447,doi: 10.5958.2016.00754.1,August 2016. (UDPATED LIST JOURNALS)
61.  Mr.R.KamalRaj, ”Test Case Classification Using Tuned Fuzzy Logic with Test Case Reusability for Test Suite Reduction”, Asian Journal of Information Technology, Volume 15, Issue 9 , ISSN:1682-3915,pp 1437-1442, August 2016. (UDPATED LIST JOURNALS)
62.  Mrs.K.Maheswari,”Auto Bug Triager For Assisting Manual Bug Triage”, Asian Journal of Information Technology, Volume 15, Issue 8,ISSN:1682-3915,pp 1334-1339, July 2016.(UDPATED LIST JOURNALS)
63.  Mrs.R.Roopa Chandrika,Dr.S.Karthik, ”Texture Classification Using Fuzzy Cognitive Maps for Grading Breast Tumor”, Asian Journal of Information Technology, Volume 15, Issue 5,ISSN:1682-3915,pp 989-995, July 2016.(UDPATED LIST JOURNALS)
64.  Dr.S.Raja Ranganathan,Dr.S.Karthik ,”An Attempt for Content Based Matching on Semantic Web Using Relation Map Based Algorithmic Approaches”, Asian Journal of Information Technology, Volume 15, Issue 4,ISSN:1682-3915,pp 840-845, July 2016  (UDPATED LIST JOURNALS)
65.  Mr.D.Prabakar,Dr.S.Karthik ,”Modified Gossiping Routing Protocol for Energy Conservation in Wireless Sensor Networks”, Asian Journal of Information Technology, Volume 15, Issue 3 , ISSN:1682-3915,pp 467-471, June 2016. (UDPATED LIST JOURNALS)
66.  Dr.S.Karthik,”Local Search Based Grid Scheduling Model for Independent Grid Tasks”, Asian Journal of Information Technology, Volume 15, Issue 2 , ISSN:1682-3915,pp 365-371, June 2016. (UDPATED LIST JOURNALS)
67.  Dr.S.Karthik,”Cross-Layer Congestion Control with Efficient Bandwidth Allocation and Dynamic Window Adaptation in Mobile Adhoc Network”, Asian Journal of Information Technology, Vol.15, Issue 3 , ISSN:1682-3915,pp 455-466, June 2016. (UDPATED LIST JOURNALS)
68.  Ms.S.R.Janani,Mr.C.B.Sivaparthipan, ”Web Content Management System”, International Journal of Trend in Research and Development, Volume 3,Issue 3,ISSN:2394-9333,pp 18-21,June 2016.
69.  Mrs.K.Maheswari,” Auto-BugTriager for Software Development and Maintenance in Domain Specific Environment”, International Journal of Computer Sciences and Engineering (IJCSE), Volume-4, Issue-6,ISSN: 2347-2693,pp 44-49,June 2016.
2017-20181.      S.Karthik,R.M.Bhavadharini, ”TCACWCA: transmission and collusion aware Clustering with enhanced weight clustering algorithm for mobile adhoc networks”, The Journal of Networks, Software Tools and Applications, Cluster Computing DOI 10.1007/s10586-017-1213-9,Springer, ISSN:1386-7857,February 2018. (Annexure –I)
2.      K.Sangeetha “An Optimal Criterion Feature Selection method for prediction and effective analysis of heart disease”, The Journal of Networks, Software Tools and Applications, Cluster Computing DOI 10.1007/s10586-017-1530-z ,Springer, ISSN:1386-7857,January 2018. (Annexure –I)
3.      B.Santhosh Kumar,S.Karthik,V.P.Arunachalam “Upkeeping Secrecy in information Extraction Using ‘k’ division graph based Postulates”, The Journal of Networks, Software Tools and Applications, Cluster Computing DOI 10.1007/s10586-017-1213-9,Springer,January 2018. (Annexure –I)
4.      S.Sathish Kumar.Dr.S.Karthik, “Investigating Energy Utilization for better Energy Management in Mobile Adhoc Networks”, Journal of Advanced Research in Dynamical and Control Systems, Volume 9, Issue 14, pp 1415-1437, December 2017.
5.      Sakthivel.V, Srihari.K, Karthik.S, ”A Survey on Cloud Performance Using Virtual Machine”, International Journal of Pure and Applied Mathematics,Volume 116,Issue 23, ISSN: 1311-8080, pp 629-638,December 2017.
6.      Nithiavathy.R, Srihari.K, Karthik.S, ”Contemplating Auditing Protocols for Dynamic Changing Data in Cloud”, International Journal of Pure and Applied Mathematics, Volume 116,Issue 21, ISSN: 1311-8080, pp 189-196,December 2017.
7.      Moorthy.K, Srihari.K, Karthik.S, ”A Survey on impact of Big data in E-Commerce”, International Journal of Pure and Applied Mathematics, Volume 116,Issue 21, ISSN: 1311-8080, pp 183-188,December 2017.
8.      C.B.Sivaparthipan “An Accessible Scheme of Cryptographic Key Organization for Micro, Small And Medium Enterprises Application Prospectus View”, Journal of Advanced Research in Dynamical and Control Systems, Volume 5, Issue 12, pp 738-749, September 2017.
9.      M.Aruna,D.Bhanu,S.Karthik “An Improved load balanced metaheuristic Scheduling in Cloud”, The Journal of Networks, Software Tools and Applications, Cluster Comput DOI 10.1007/s10586-017-1213-9,Springer,September 2017. (Annexure –I)
10.  Dr.V.Praveena S.Sandhya,U.Reshma “Survey on Various Data Encryption Algorithms Used in Cloud Security”, International Journal of Innovative Research in Computer and Communication Engineering, DOI: 10.15680/IJIRCCE.2017. 0509073,Vol. 5, Issue 9,ISSN:2320-9798, pp 15260-15266,September 2017.
11.  Dr.V.Praveena, M.Showmyaa, B.Sathya “A Survey on Intrusion Detection Techniques”, International Journal of Innovative Research in Computer and Communication Engineering, DOI: 10.15680/IJIRCCE.2017. 0509073, Vol. 5, Issue 9, ISSN: 2320-9798, pp 15147-15153, September 2017.
12.  Mr.J.Alfred Daniel,Karthi Subburathinam,Anand Paul,Newlin Rajkumar,Seungmin Rho, ”Big Autonomous Vehicular data Classifications: Towards procuring intelligence in ITS Vehicular Communications”, Volume 9,ISSN:2214-2096,pp 306-312,September 2017.
13.  Ms.B.Maheswari,V.K.Shanmuganathan,Dr.S.Karthik ”Link Stability Energy Aware Routing in Mobile Adhoc Network : RSEA-MAODV   ”, IOSPRESS,2016, September 2017. (Annexure –I)
14.  Dr.K.Sangeetha,   “Efficient Analytical Approaches to Predict the Human Diseases Using FP-Tree with Bagging Algorithm”, Research Journal of Biotechnology, Special Issue 2 pp-73 – 78 August 2017.(Annexure –I)
2018-20191. M.Bala Anand, N.Karthikeyan & S.Karthik, “Designing a Framework for Communal Software: Based on the assessment using Relation Modelling”, International Journal of Parallel Programming, Springer US, ISSN: 0885-7458 (Print) 1573-7640 (Online), August 2018, Impact Factor : 0.351.
2. M BalaAnand, N Karthikeyan, S Karthik, R. Varatharajan, Gunasekaran Manogaran, C. B. Sivaparthipan, “An Enhanced Graph based Semi-supervised Learning Algorithm to Detect Fake users on Twitter”, Springer US, The Journal of Supercomputing, July 2019, ISSN: 0920-8542 (Print) 1573-0484 (Online) (Impact Factor: 2.157)
3. Aruna M, Bhanu D & Karthik S 2019, “Load Balancing in Cloud Environment with Switching  Mechanism  and  Token  based  Algorithm”,  International  Journal  of  Public Sector Performance Management, Inderscience Online, Vol. 5, No. 2, Feb 2019.
4. R.M.Bhavadharini, S.Karthik, N.Karthikeyan, and Anand Paul 2018 “Wireless Networking Performance in IoT Using Adaptive Contention Window”, Wireless Communications and Mobile Computing Volume 2018, Article ID 7248040, 9 pages https://doi.org/10.1155/2018/7248040
5. Dr. M. Kavitha, Dr. T. Kalaikumaran,  “An Automatic Cradle System for Infant Monitoring”, Journal of Applied Science and Computations, ISSN NO: 1076-5131,Volume 6,Issue 4,pp 727-732,April 2019.
6. Mrs.K.Maheswari, “Detection of Emergency Vehicles Using Sensors”, International Journal of Research, Volume 8,Issue 3,ISSN:2236-6124,pp 2382-2385,March 2019.
7. Dr.T.Kalaikumaran, “Encrypted Cloud Storage Search”, International Journal Of Scientific Research And Review, Volume 7, Issue 03,ISSN No:2279-543X ,pp 144-149,March 2019
8. Ms.Deny Nancy, Dr.T.Kalaikumaran, “Smart Car Parking System Using IoT”, International Journal Of Scientific Research And Review, Volume 7, Issue 03,ISSN No:2279-543X ,pp 3352-3358,March 2019
9. Mrs.K.Maheswari, Dr.T.Kalaikumaran, “Intelligent power management for college auditorium”, International Journal Of Scientific Research And Review, Volume 7, Issue 03,ISSN No:2279-543X ,pp 1-5,March 2019
10. Mrs.B.Vinothini, Dr.T.Kalaikumaran “VPN recognition and optimization in sdn enabledcloud environment”, International Journal Of Scientific Research And Review, Volume 7, Issue 03,ISSN No:2279-543X ,pp 137-143,March 2019
11. Mr.M.Karthick, Dr.T.Kalaikumaran “Smart garbage monitoring bin using Iot”, International Journal Of Scientific Research And Review, Volume 7, Issue 03,ISSN No:2279-543X ,pp 107-114,March 2019
12. Dr.C.Chandru Vignesh,Dr.T.Kalaikumaran “Secure and efficient electronic voting machine using iot”, International Journal Of Scientific Research And Review, Volume 7, Issue 03,ISSN No:2279-543X ,pp 295-300,March 2019
13. Dr.S.Raja Ranganathan, “Sensor based automatic fertigation system”, International Journal Of Scientific Research And engineering trends, Volume 5, Issue 02,ISSN No:2395-566X ,pp 253-256,March 2019
14. Mr.S.Sathish kumar, “Root security firewall”, International research Journal Of Engineering and technology, Volume 6, Issue 03,ISSN No:2395-0056;2395-0072 ,pp 2727-2730,March 2019
15. Mrs.B.Vinothini,Dr.T.Kalaikumaran “Plugin software for e-commerce website”, International Journal Of Scientific Research And Review, Volume 7, Issue 03,ISSN No:2279-543X ,pp 11-14,March 2019
16. Mrs.R.Monisha, “An Automatic light and fan control system using ultrasonic sensor through wi-fi”, International Journal Of Scientific Research And Review, Volume 7, Issue 03,ISSN No:2279-543X ,pp 41-48,March 2019
17. Mrs.S..Sangeetha, Dr.T.Kalaikumaran ,”Prediction of cardiac arrest using iot”, International Journal Of Scientific Research And Review, Volume 7, Issue 03,ISSN No:2279-543X ,pp 167-171,March 2019
18. Mrs.K.Maheswari, Dr.T.Kalaikumaran, ”Smart helmet using sensor”, International Journal Of Scientific Research And Review, Volume 7, Issue 03,ISSN No:2279-543X ,pp 6-10,pp 6-10,March 2019
19. Mrs.P.Dhivya,” Comparative study of machine learning algorithms for crop yield prediction”, International Journal Of Scientific Research And Review, Volume 7, Issue 03,ISSN No:2279-543X ,pp 288-294,March 2019
20. Dr. R.Sabitha, Dr.T.Kalaikumaran,”Crypton Chatroom Using Cloud”, International Journal Of Scientific Research And Review, Volume 7, Issue 03,ISSN No:2279-543X ,pp 172-176,March 2019
21. Mrs.P.Poonkodi,” Secure And Efficient Data Transmission In Cluster Based Wireless Sensor Network With RSA Algorithm”, International Journal Of Scientific Research And Review, Volume 7, Issue 03,ISSN No:2279-543X ,pp 431-440,March 2019
22. Dr.T.Kalaikumaran “Encrypted Cloud Storage Search”, International Journal Of Scientific Research And Review, Volume 7, Issue 03,ISSN No:2279-543X ,pp 144-149,March 2019
23. Ms.V.Savitha, Dr.Kalaikumaran “Educational Data Mining”, International Journal Of Scientific Research And Review, Volume 7, Issue 03,ISSN No:2279-543X ,pp 150-158,March 2019
24. Mr.M.Karthick, Dr.T.Kalaikumaran “Piezoelectric Based Automatic Power Generation Using IoT”, International Journal Of Scientific Research And Review, Volume 7, Issue 03,ISSN No:2279-543X ,pp 120-126,March 2019
25. Yuvaraj.D, Dr.T. Kalaikumaran,”Key Deduplication With Block And File Level”, International Journal Of Scientific Research And Review, Volume 7, Issue 03,ISSN No:2279-543X ,pp 196-202,March 2019
26. Dr. R.Sabitha, Dr.T.Kalaikumaran, ”Shoulder peak resistant pin entry scheme using concentrate haptic feedback”, ”, International Journal Of Scientific Research And Review, Volume 7, Issue 03, ISSN No:2279-543X ,pp March 2019
27. Dr.K.Sangeetha, Dr.T.Kalaikumaran, ”Automatic Speed Limiting System For Vehcile Using RFID And IoT In Smart city”, International Journal Of Scientific Research And Review, Volume 7, Issue 03,ISSN No:2279-543X ,pp 115-119,March 2019
28. Dr.S.Karthik,Mr. J.Alfred Daniel “Anti-Theft Mechanisms in ATM Centres Using Different Sensors”, International Journal of Computer Science Trends and Technology Volume 7, Issue 1, ISSN:2347-8578,pp 5-9, February 2019.
29. Mr.B.Vivek, Mr.D.Yuvaraj, Mr.S.Samsudeen “An Analysis on Bus tracking System”, Journal of applied Science and Computation”, Volume 5, Issue 11, ISSN:1076-5131,December 2018.
30. C.B.Sivaparthipan, N.Karthikeyan & S.Karthik, “Designing Statistical Assessment  Health  Care  Information  System  for  Diabetics  Analysis  Using  Big  Data”, Springer Multimedia Tools and Applications, Springer US, ISSN: 1380-7501 (Print) 1573-7721 (Online) DOI: https://doi.org/10.1007/s11042-018-6648-3, November 2018.  Impact Factor 1.541.
31. Dr.R.Sabitha ,Dr.S.Karthik, “Power aware Scheduling using gravitational search algorithm for life time enhancement of wireless sensor network”, Journal of Computational and Theoretical Nanosciences, Vol.15, No.4, DOI.10.1166/JCTN.2018.7041, pp 1163-1169,August 2018.
32.  Mrs.S.Sangeetha, “Smart Healthcare using IOT”, Journal of Advanced Research in Dynamical and Control Systems, Issue 3, ISSN: 1943-023X, pages 884-887, June 2018.
33.  Mr.C.B.Sivaparthipan, “Early Detection and Prediction of Amblyopia by Predictive Analytics using Apache Spark”, International Journal of Pure and Applied Mathematics, Volume 119, ISSN: 1314-3395, pages 3159-3171, June 2018.
34.  Maragatham T, Karthik S & Bhavadharini R.M, 2018 ‘TCACWCA: transmission and collusion aware clustering with enhanced weight clustering algorithm for mobile ad hoc networks’, Journal of Cluster Computing (2018), https://doi.org/10.1007/s10586-017- 1574-0, online ISSN No: 1573-7543. [Annexure I, IF: 3.997, Published in Springerlink].
35.  Magesh Kumar, C, S. Karthik & V.P.Arunachalam, 2018, „Hybrid Metaheuristic Algorithm   for   Improving   the   Efficiency   of   Data   Clustering‟,   Cluster   Computing, Springer. Vol. 22, no. 83, ISSN : 1386 7857. Published (Impact Factor: 2.040.)
36.  P.Gowtham, V.P.Arunachalam, S.Karthik.,et al. (2018) “An Efficient Monitoring of Real Time Traffic Clearance for an Emergency Service Vehicle Using IOT” International Journal for parallel programming- IJPP Springer, 2018,pp 1-27 DOI:10.1007/s10766-018-0603-9 Print ISSN 0885-7458 Online ISSN 1573-7640 [Annexure-I, Sept 2018].
37.  Kalpana, V & S.Karthik, 2018 „Route Handover Technique using Cooperative Communication in Cluster Based MANET‟, Cluster Computing – The Journal of Networks, Software Tools and Applications,, Springer, March 2018 (IF: 2.040) ISSN: 1386-7857.
38.  Murugan K, Arunachalam V P & Karthik S, 2018 “A Hybird Filtering Approach for MRI image with Multiresolution‘, Journal of Cluster Computing, Springer ((Impact Factor: 2.040) Annexure I, 6 March 2018).
39.  Thirukrishna J T, Karthik S & Arunachalam V P, ‘Revamp energy efficiency in Homogeneous Wireless Sensor Networks using Optimized Radio Energy Algorithm (OREA)   and   Power-Aware   Distance   Source   Routing   protocol’,   Future   Generation Computer Systems (FGCS), EVISE (Elsevier), vol.81, pp.331-339, 2017, ISSN: 0167- 739X. [Annexure I, IF: 3.997, Published in Science direct].
2019-20201.      BalaAnand Muthu, C.B.Sivaparthipan, “IOT BASED WEARABLE SENSOR FOR DISEASES PREDICTION AND SYMPTOM ANALYSIS IN HEALTHCARE SECTOR” , Springer Peer-to-Peer Networking and Applications, Springer US, Jan, 2020, ISSN: 1936-6442 (Print) 1936-6450 (Online), DOI: https://doi.org/10.1007/s12083-019-00823-2 Impact Factor: 2.397 (SCIE Publication).
2.      C.B.Sivaparthipan, BalaAnand Muthu, “INNOVATIVE AND EFFICIENT METHOD OF ROBOTICS FOR HELPING THE PARKINSON’S DISEASE PATIENT USING IOT IN BIG DATA ANALYTICS”, John Wiley & Sons, Ltd, Transaction on Emerging Telecommunication Technologies, Nov 2019, ISSN: 2161-3915 (Online) DOI: https://doi.org/10.1002/ett.3838 Impact Factor 1.258 (SCIE Publication).
3.      BalaAnand Muthu, C.B.Sivaparthipan, “AN` ENHANCED GRAPH BASED SEMI-SUPERVISED LEARNING ALGORITHM TO DETECT FAKE USERS ON TWITTER” has been accepted in Springer  The Journal of Supercomputing, July 2019 ISSN:0920-8542 (print version) ISSN: 1573-0484 (Print) 9 Impact Factor 1.532 (SCIE Publication).
4.      C.B.Sivaparthipan, BalaAnand Muthu, “DESIGNING STATISTICAL ASSESSMENT HEALTH CARE INFORMATION SYSTEM FOR DIABETICS ANALYSIS USING BIG DATA”, Springer Multimedia Tools and Applications, Springer US, Aug 2019, ISSN: 1380-7501 (Print) 1573-7721 (Online) DOI: https://doi.org/10.1007/s11042-018-6648-3 Impact Factor 1.541 (SCIE Publication).
5.       R Saravana Ram, C.B.Sivaparthipan, BalaAnand Muthu “COLOUR AND ORIENTATION OF PIXEL BASED VIDEO RETRIEVAL USING IHBM SIMILARITY MEASURE” Springer Multimedia Tools and Applications, Springer US, ISSN: 1380-7501 (Print) 1573-7721 (Online) DOI: https://doi.org/10.1007/s11042-019-07805-9 Impact Factor 1.541 (SCIE Publication).
6.      R.Sabitha, S.Karthik, “Cluster-Based Systematic Data Aggregation Model (CSDAM) for Real time Data Processing in Large Scale WSN”, Wireless Personal Communications, Jan 2020.
7.      R.Sabitha, S.Karthik, “An enhanced soft computing –based formulation for secure data aggregation and efficient data processing in large scale wireless networks”, Soft Computing, Jan 2020.
8.      R.Sabitha, S.Karthik, “Mouse Movement pattern based analysis of customer behavior (CBA-MMP) using Cloud data Analytics”, Wireless Personal Communications, Jan 2020.
9.      R.Sabitha, S.Karthik, “FSS-SDD: Fuzzy based semantic search for secure data discovery from outsourced cloud data”, Soft Computing, Jan 2020.
10.  Sakthivel V, Srihari K & Karthik S 2019, ‘HACRP: A Resource Monitoring and Provisioning  Framework  for  Cloud  Applications’,  Applied  Mathematics  &  Information Sciences, Natural Sciences Publishing Corp, ISSN: 1935-0090 (Print) 2325-0399 (Online), Impact Factor 0.94, Annexure – I
11.  R.Nithiavathy, Dr. K.Srihari, Dr. S.Karthik, Verified Data Integrity with Dynamic Data in the Cloud Server,  Applied Mathematics& Information Sciences, 2019. ISSN 1935- 0090 (print) ISSN 23250399 (online).Impact Factor :0.94, Annexure-I
12.  Shanthi Selvaraj, Sangeetha Subramani, Sangeetha Prakash, “Fuzzy and ontology based crop prediction using wireless sensor networks & Internet of Things”, in Caribbean Journal of Science, Volume 53, Issue 2, pp 1029-1036, June 2019. [Scopus (Annexure-I), ISSN No. 0008-6452]
13.  K.Sangeetha, P.Priyanka, H.Lighashini, V.Priya, “IoT based smart wearable for temperature adjustment in AC for patients in hospitals”, in Caribbean Journal of Science, Volume 53, Issue 2,90o pp 444 – 451, June 2019. [Scopus (Annexure-I), ISSN No. 0008-6452]
14.  S.Prakash, K.Sangeetha, P.S.Periasamy, “Dengue Fever Prediction Using Associative Classification Approach based on climatical changes”, in Caribbean Journal of Science, Volume 53, Issue 2, pp 608-613, June 2019. [Scopus (Annexure-I), ISSN No. 0008-6452]
15.  Deny Nancy, Summia Praveen, “Voice Assistant Application for a college Website”, International Journal of Recent Technology and Engineering (IJRTE), Volume 7, Issue 6, pp 2065-2070, June 2019. [Scopus , ISSN No. 2277-3878]
16.  D.Sathya, S.Sangeetha, “Http Rule Base Intrusion Detection and Prevention System”, in International Journal of Innovative Technology and Exploring Engineering (IJITEE), Volume-8, Issue- 9S2, July 2019. [Scopus , ISSN: 2278-3075]
17.  M.Anbarasan, Bala Anand Muthu, C.B.Sivaparthipan, “Detection of flood disaster system based on IoT, Big Data and convolutional deep neural network” in Journal of Computer Communications, volume 150, pp.150-157, November 2019.(Annexure-I)  [Scopus and SCIE]
18.  P.Dhivya, A.Karthikeyan, V.K. shanmuganaathan, “Internet of Things for the development of smart citie”, in International Journal of Recent Technology and Engineering (IJRTE) Volume 8, Issue 4, November 2019. [Scopus , ISSN: 2277-3878]
19.  Dr.S.Karthik, “Implementation of enhanced blowfish algorithm in cloud environment” in  Journal of Ambient Intelligence and Humanized Computing, Feb 2020
20.  Dr.S.Karthik, “Attempting to Design Differed Service Broker Forwarding Strategy for Data Centres in Cloud Environment” in International Journal of Enterprise Network Management, March 2020
21.  Dr.S.Karthik, “ An Iterative Processing Scheme for Enhancing the Map Reduce Using Map Information Storage in Wireless Environment” in Wireless Personal Communications, Nov 2019
22.  Dr.S.Karthik “A Decentralized Accountability Framework for Enhancing Secure Data Sharing Through ICM in Cloud” in International Journal of Innovative Technology and Exploring Engineering (IJITEE), August 2019
23.  Dr.S.Karthik, “A Machine Vision Based Detection & Classification of Neovascularisation in Retinal Blood Vessels” International Journal of Innovative Technology and Exploring Engineering (IJITEE), August 2019
24.   Karthikeyan, V. P. Arunachalam, S. Karthik  “Attempting to Model a Fresh Three Dimensional Coverage Scheme for Wireless Sensor Networks” in Wireless Personal Communications, sep 2019
25.  S. Karthik , “Holding maximum customers in cloud business environment by efficient load balancing methods based on MPSO-MC” in Information Systems and e-Business Management, sep 2019
YearPaper details
2019-2020Dr. R. Rajasekaran, “Reduction Of Harmonics In Multilevel Inverter Without Using DC Link Capacitor”, International Journal of Research, ISSN:2236-6124, Volume-8, Issue-5, P. 2631-2635, 2019. (UGC Approved Journal).
2019-2020S. Srikanth, “Patient Health Monitoring With Health Assistant”, International Research Journal of Engineering and Technology (IRJET), p-ISSN: 2395-0072, Volume: 06 Issue: 10, P. 891-898, October 2019.
2019-2020Karthika A, Sreejith S, Akshaya S R, “Application of Image Processing Techniques in Biomedical Field using MRI Images”, International Journal For Research & Development In Technology, ISSN (O) :- 2349-3585, Volume-12,Issue-3, P. 26-31, September-2019.
2019-2020Sathish Kumar. R, “Battle Humanoid”, Journal of Emerging Technologies and Innovative Research (JETIR), ISSN-2349-5162, Volume 6, Issue 6, P. 371-376, June 2019, (UGC Approved Journal).
2019-2020S.Prema, “Dispatch Drones”, Journal of Emerging Technologies and Innovative Research (JETIR), ISSN-2349-5162, Volume 6, Issue 6, P. 665-671, June 2019, (UGC Approved Journal).
2019-2020Dr. J. Geetha Ramani, “Employment Health Legacy”, Journal of Emerging Technologies and Innovative Research (JETIR), ISSN-2349-5162, Volume 6, Issue 6, P. 312-315, June 2019, (UGC Approved Journal).
2019-2020Dr. B. Sivasankari, “Preferment and Intension of the Intellectual 3D Printed Prosthetic Arm Appropriating EMG Signals”, International Journal of Engineering Trends and Technology (IJETT), ISSN: 2231-5381, Volume 67, Issue 10, P.95-99, October 2019.
2019-2020Jagadesh. M, “Self Directing Shopper”, Journal of Emerging Technologies and Innovative Research (JETIR), ISSN-2349-5162, Volume 6, Issue 6, P. 47-50, June 2019, (UGC Approved Journal).
2019-2020S. Vigneshwaran, “Smart Bus Tracking Using GPS and GSM”, Journal of Emerging Technologies and Innovative Research (JETIR), ISSN-2349-5162, Volume 6, Issue 6, P. 298-303, June 2019, (UGC Approved Journal).
2019-2020R. Prabha, “Smart Aquaponics Using IoT”, Journal of Emerging Technologies and Innovative Research (JETIR), ISSN-2349-5162, Volume 6, Issue 6, P. 324-328, June 2019, (UGC Approved Journal).
2019-2020S. Sreejith, A. Abarnaa, S. Dhanush, M. Gowtham, N. Harish, “Advanced High Speed Black Box Based Vehicle Crash Investigation System”, International Journal of Trend in Scientific Research and Development (IJTSRD), e-ISSN: 2456 – 6470, Volume 4, Issue 1, P. 56-59, December 2019.
2019-2020Dr. J. Ajayan, “Automated Honeycomb Composite Structure Repair System”, International Research Journal of Engineering and Technology (IRJET), p-ISSN: 2395-0072, Volume: 07, Issue: 02, P. 1-5, February 2020.
2019-2020Dr. Sivasankari. B, “Gesture Based Sign language For Hearing Impaired People”, International Journal of Scientific Research in Engineering and Management (IJSREM), ISSN: 2582-3930, Volume: 04, Issue: 02, P. 1-5, February -2020.
2019-2020Sumathi. K, “Monitoring Of Urban Waste Water For Agriculture Using IoT”, International Journal of Scientific Research in Engineering and Management (IJSREM), ISSN: 2582-3930, Volume: 04, Issue: 02, P. 1-10, February -2020.
2019-2020Dr. D. Mohanageetha, “Design Optimization of Compact Patch Antenna and Novel Microstrip Integrated Array”, International Journal for Research in Applied Science & Engineering Technology (IJRASET), ISSN: 2321-9653; Volume 8, Issue 2, P. 253-259, February 2020.
2019-2020Dr. N.J.R.Muniraj, “Low power consumption techniques and implementation in VLSI”, International Research Journal on Advanced Science Hub , ISSN: 2582-4376; Special Issue:ICES 2020, March 2020.
2019-2020Dr.T.Ravichandran, “Design of Carry Save Adder by Parity-Based Error Detection using CMOS Technology”, International Research Journal on Advanced Science Hub , ISSN: 2582-4376; Special Issue:ICES 2020, March 2020.
2019-2020Dr.T.Ravichandran, “Design of GDI Based Hybrid Full Adder for Efficient Computing Systems”, International Research Journal on Advanced Science Hub , ISSN: 2582-4376; Special Issue:ICES 2020, March 2020.
2018-2019Dr. B. Sivasankari, “Smart energy harvesting for intelligent railway conditioning monitoring system”, Journal of Electrical Engineering, ISSN: 1582-4594, Volume: 19, Issue:2, P. 1-8, April 2019.
2018-2019Ramya.E, Affrudeen.B, Abinaya.R, “Smart City Implementation Models Based on IOT Technology”, Journal of Emerging Technologies and Innovative Research (JETIR), ISSN-2349-5162, Volume 5, Issue 9, P. 487-489, September 2018. (UGC Approved Journal)
2018-2019Ramya. E, “An intelligent human life safety system”, International Journal of Advance Research and Development, ISSN: 2455-4030, Volume 3, Issue 10, P. 104-107, October 2018.
2018-2019Karthika A, “An Efficient Approach For Removal Of Ocular Artifacts In EEG-Brain Computer Interface”, International Research Journal of Engineering and Technology (IRJET), p-ISSN: 2395-0072, Volume: 05 Issue: 10, P. 404-408, October 2018.
2018-2019Sreejith S, Prema S, Muthukumar A, “An Efficient Approach For Removal Of Ocular Artifacts In EEG-Brain Computer Interface”, International Research Journal of Engineering and Technology (IRJET), p-ISSN: 2395-0072, Volume: 05 Issue: 10, P. 404-408, October 2018.
2018-2019Prema S, Abishek Josh Wilson A, Janaki Raman P, Harish M, “Intelligent Image Forgery Detection Methodology With Expectation Maximation Algorithm”, International Journal For Research & Development In Technology, ISSN (O) :- 2349-3585, Volume-10, Issue-4, P. 166-168, October-2018.
2018-2019Prema. S, “A Survey ofn RFID And Finger Print Sensor for Vehicle and license authentication”, International Journal For Research and Development in Technology, ISSN: 2349-3585, Volume-10, P. 39-42, October-2018.
2018-2019Mythili S, Krishnan V, Madhubala V, “Vehicle Theft Detection And Tracking System Using Open CV”, International Journal For Research & Development In Technology, ISSN (O) : 2349-3585, Volume-10, Issue-4, P. 134-138, October-2018.
2018-2019Dr. J.Geetha Ramani, S.Mohana Sowmiya, S.Mirunalinii, U. Nandha Kumar, “Review On Solar Power Remote Monitoring And Controlling Using IoT”, International Research Journal of Engineering and Technology (IRJET), p-ISSN: 2395-0072, Volume: 05 Issue: 10, P. 866-869, October 2018.
2018-2019M. Saravanan, T. Krishnapriya, S.R. Lavanya, P. Karthikeyan, “Fuel Level Indicator For Petrol Bunk Storage Tanks/Oil Industries”, International Research Journal of Engineering and Technology (IRJET), p-ISSN: 2395-0072, Volume: 05 Issue: 10, P. 1689-1694, October 2018.
2018-2019M.Jagadesh, V.Narayanan, M.Priya Vadhana, Mr.K.Logeshwaran, “Protection Mechanism For Smart Industry”, International Journal For Research & Development In Technology, ISSN (O) : 2349-3585, Volume-10, Issue-4, P. 173-177, October-2018.
2018-2019A. Karthikeyan, J. Kalai Muthu, N.Karthikeyan, G.Kasivisali, “Remote HRV Monitoring System For Hypertensive Patients Using IoT”, International Research Journal of Engineering and Technology (IRJET), p-ISSN: 2395-0072, Volume: 05 Issue: 10, P. 1392-1397, October 2018.
2018-2019G.Naveen Balaji, “Design of Low Power Half Adder using Static 125nm CMOS Technology”, International Journal of Engineering and Technical Research (IJETR), ISSN: 2454-4698, Volume-8, Issue-9, P. 1-3, September 2018.
2018-2019G. Naveen Balaji, “Area Effective Full Subtractor Based on 125nm CMOS Technology”, International Journal of Trend in Scientific Research and Development (IJTSRD), ISSN: 2456-6470, Volume-2, Issue-6, P. 1371-1374, September 2018.
2018-2019R. Sathish kumar, S. Pavithra, C.R. Kishore, V. Meganathan, “Radio Frequency Identification (RFID) Based Smart Trolley For Super Market”,International Research Journal of Engineering and Technology (IRJET), p-ISSN: 2395-0072, Volume: 05 Issue: 10, P. 977-979, October 2018.
2018-2019G. Naveen Balaji, “RTOS System Scheduling With WCET Estimation Using EDF-VD Algorithm”, International Journal of Latest Technology in Engineering, Management & Applied Science (IJLTEMAS), ISSN 2278-2540, Volume 7, Issue 10, P. 58-66, October 2018.
2018-2019G. Naveen Balaji, “Static – CMOS Technology Based Low Power Carry Look Ahead Adder for High Speed Applications”, International Journal of Latest Technology in Engineering, Management & Applied Science (IJLTEMAS), ISSN 2278-2540, Volume 7, Issue 10, P. 34-36, October 2018.
2018-2019M. Saravanan, M. Jagadesh, “Smart Data Monitoring System for Power Loom Using IOT”, International Journal of Pure and Applied Mathematics, ISSN: 1311-8080, Volume 119, No. 10, P. 937-947, 2018.
2018-2019T. Prabhu, “Brain Tumor Segmentation And Detection Using Anisotropic Diffusion With MRI Technique”, International Journal Of Science And Innovative Engineering & Technology, ISBN No. 978-81-923607-3-7, Volume. 5, P. 1-4, May 2018.
2018-2019R.Sathish kumar, A.Karthikeyan, B.Affrudeen, R.Abinaya, “Simulation of Clipper Circuits using LT Spice Software”, International Journal Of Future Trends In Engineering And Science, ISSN: 2581-7213, Volume. 1, Issue: 2, P. 1-11, 2018.
2018-2019S. Vigneshwaran, “Implementation Of High Efficiency Full Adder”, International Journal of Advance Reserarch in Science and Engineering.(IJARSE), ISSN: 2319-8354, Volume. 7, Issue: 11, P. 19-25, November 2018.
2018-2019S. Sreejith, “Automatic Power Demand Controller using IoT’, International Journal of Research in Engineering, Science and Management, ISSN : 2581-5792, Volume-1, Issue-11, P. 653-657, November-2018.
2018-2019A. Anandha Raja, K. Ramya, B. Kousalya, Mr.S. Jeeva, “Prevention Of Wild Animals From Accidents Using Image Detection And Edge Algorithm”, International Research Journal of Engineering and Technology (IRJET), p-ISSN: 2395-0072, Volume: 05 Issue: 11, P. 36-37, November 2018.
2018-2019Sumathi K, Deepak R, Akilprakash G, Sudhakar E, “Intellect Disease Analysis In Plants By Deep Learning Algorithm In Image Inspection System”, International Journal For Research & Development In Technology, ISSN (O) : 2349-3585, Volume-10, Issue-6, P. 87-89, December-2018.
2018-2019Dr. J. Ajayan, I.Rinisha Prem Priya, “Design Of Approximate Multiplier For High Speed Application”, Journal of Emerging Technologies and Innovative Research (JETIR), ISSN-2349-5162, Volume 6, Issue 2, P. 354-358, February 2019. (UGC Approved Journal)
2018-2019Dr. Sivasankari. B, “Baggage Tracing and Handling Systems Using MIkronFARE and IoE for Airports”, International Journal of Research and Analytical Reviews (IJRAR), ISSN 2349-5138, Volume 6, Issue 1, P. 175-178, March 2019. (UGC Approved Journal)
2018-2019Dr. J.Geetha Ramani, S.Mirunalinii, S. Mohana Sowmiya, “Solar Power Remote Monitoring And Controlling Using IoT”, International Journal of Research and Analytical Reviews (IJRAR), ISSN 2349-5138, Volume 6, Issue 1, P. 653-657, March 2019. (UGC Approved Journal)
2018-2019Dr. S.Srikanth, S.Radhakrishna, K.P.Kavipriyan, S.Naveenkumar, “Design and Implementation of Cubic Computation using Vedic Sutras”, International Journal of Research and Analytical Reviews (IJRAR), ISSN 2349-5138, Volume 6, Issue 1, P. 702-705, March 2019. (UGC Approved Journal)
2018-2019R. Sathish Kumar, “Smart Trolley System For Self Regulating Billing”,International Journal of Advance Reserarch in Science and Engineering.(IJARSE), ISSN: 2319-8354, Volume. 8, Issue: 2, P. 14-18, February 2019.
2018-2019G.Naveen Balaji, J. Jayageetha, “14T Full Adder in 125nm CMOS technology for FFT applications using piecewise constant interpolation f(x) = 2.0”, Advances In Natural And Applied Sciences, ISSN-1995-0772, Volume. 12, Issue: 9, P. 17-26, September 2018.
2018-2019Dr. Ajayan. J, “Design Of Approximate Multiplier With Tradeoff In Power And Area”, International Journal of Engineering Development and Research (IJEDR), ISSN: 2321-9939, Volume 7, Issue 2, May 2019.
2018-2019S.Prema, Ramanan.S.V, R.Arun Sekar,Rajan Cristin, “High Performance Reversible Vedic Multiplier Using Cadence 45nm Technology”, International Journal of Innovative Technology and Exploring Engineering (IJITEE), ISSN: 2278-3075, Volume-8 Issue-7, P. 47-52, May, 2019.
2018-2019S. Prema, “Irrigation Based Agricultural Field Monitoring System”, International Journal Of Science And Innovative Engineering & Technology, ISBN 978-93-81288-18-4, Vol. 4, P. 1-3, May 2019.
2018-2019Dr. J.Geetha Ramani, G.Naveen Balaji, “Design of 8 Bit CAM Using MSML Design”, International Journal of Engineering Development and Research (IJEDR), ISSN: 2321-9939, Volume-7, Issue-2, P. 201-205, May, 2019.
2017-2018M. Saravanan, T. Prabhu, A. Santhosh Kumar, M. Jagadesh, “Analysis and Implementation of Mean, Maximum and Adaptive Median for Removing Gaussian Noise and Salt & Pepper Noise in Images”, European Journal of Applied Sciences, ISSN: 2079-2077, Volume 9, Issue: 5, P: 219-223, 2017.
2017-2018M. Saravanan, M. Jagadesh, “Enhancing QoS in Wireless Mobile Adhoc Networks with Energy Aware Reliable Routing Algorithm”, European Journal of Applied Sciences, ISSN: 2079-2077, Volume 9, Issue 5, P: 234-238, 2017.
2017-2018S Priya, R. Sathish Kumar, R. Prabha, “Optimized Direct Method Routing For Cache Memory In RISC Architecture”, IIOAB Journal, ISSN: 0976-3104, Volume. 9, Special issue 1, P. 30-35, January 2018.
2017-2018G. Naveen Balaji, Dr. J. Geetha Ramani, Dr. B. Sivasankari, M. Sreenivasa Perumal, “65nm TGMS flipflops for High Speed Design Standards”, Advances In Natural And Applied Sciences, ISSN-1995-0772, Volume. 12, Issue: 5, P. 1-6, May 2018.
2017-2018A Gautami, S. Priya, S. Mythili, “Design and Implementation of Corrugated Circular Loop Antennas in Wireless Power Transfer Technology”, IIOAB Journal, ISSN: 0976-3104, Volume. 9, Special issue 1, P. 26-29, January 2018.
2017-2018Dr. T. Ravichandran, “Arithmetic Logic Unit Design For Reversible Logic Condition Using Reversible Logic Gates”, International Journal of Advance Research in Science and Engineering.(IJARSE), ISSN: 2319-8354, Volume. 6, Issue: 10, P. 837-845, October 2017.
2017-2018Prabu Venkateswaran , Kalai Muthu .J, Krishnaveni .S, Mahalakshmi . S, “Low Power Design of Carry Skip Bcd Subtractor By Using Bcd Adder”, International Journal of Advance Research in Science and Engineering.(IJARSE), ISSN: 2319-8354, Volume. 6, Issue: 10, P. 1113-1118, October 2017.
2017-2018A. Gautami, B.Kousalya, G.Kasivisali, “Designs of Carry Look Ahead Bcd Subtractor For Reversible Logic Applications”, International Journal of Advance Research in Science and Engineering.(IJARSE), ISSN: 2319-8354, Volume. 6, Issue: 10, P. 1106-1112, October 2017.
2017-2018Karthika A, Prema. S, Divya E, Ramya E, “Fingerprint Recognition of Image Forensics Using Random Projections”, Journal of Network Communications and Emerging Technologies (JNCET), ISSN: 2395-5317, Volume 7, Issue 9, P. 31-38, September 2017.
2017-2018M.Srinivasaperumal, S.Pavithra, V.S.Kavya Lekshmi, K.Mohammed Arshad, “128 Bit Modified Carry Select Adder Using Binary To Excess-One Converter”, International Journal of Advance Research in Science and Engineering.(IJARSE), ISSN: 2319-8354, Volume. 6, Issue: 10, P. 829-836, October 2017.
2017-2018S. Vigneshwaran, “256 Bit Linear Carry Select Adder”, International Journal of Advance Research in Science and Engineering.(IJARSE), ISSN: 2319-8354, Volume. 6, Issue: 10, P. 941-946, October 2017.
2017-2018A. Karthikeyan, “Design and Analysis of 4bit Array Multiplier using 45nm Technology”, International Journal of Advance Research in Science and Engineering.(IJARSE), ISSN: 2319-8354, Volume. 6, Issue: 10, P. 803-809, October 2017.
2017-2018M. Jagadesh, A. Mohammed Asif,V. Pavithra, R.Preethi, “128 Bit Square Root Carry Select Adder”, International Journal of Advance Research in Science and Engineering.(IJARSE), ISSN: 2319-8354, Volume. 6, Issue: 10, P. 846-851, October 2017.
2017-2018A. Santhosh Kumar, S.Mohana Sowmiya, S.Mirunalinii, U. Nandha Kumar, “128 Bit Modified Square Root Carry Select Adder”, International Journal of Advance Research in Science and Engineering.(IJARSE), ISSN: 2319-8354, Volume. 6, Issue: 10, P. 867-874, October 2017.
2017-2018G. Naveen Balaji & D. Rajesh, “Smart Vehicle Number Plate Detection System for Different Countries Using an Improved Segmentation Method”, Imperial Journal of Interdisciplinary Research (IJIR), ISSN: 2454-1362, Volume-3, Issue-6, P. 263-268, 2017.
2017-2018G. Naveen Balaji, N.V. Hari Suriya, S. AnandVikash, R.Arun & S. Arun Kumar, “Analysis of Various Liquid Components under Different Temperature and Density Constraints Pertaining To Fractional Distillation”, Imperial Journal of Interdisciplinary Research (IJIR), ISSN: 2454-1362, Volume-3, Issue-6, P. 664-669, 2017.
2017-2018Naveen Balaji. G, Rajesh. D, “Python Based Reverse Timing Algorithm for Human Brain Activity Using Color Psychology”, The International Journal of Indian Psychology ISSN: 2349-3429, Volume 4, Issue 3, P. 79-86, 2017.
2017-2018G. Naveen Balaji, S. Chenthur Pandian, D. Rajesh, “High Performance Triplex Adder Using CNTFET”, International Journal of Trend in Scientific Research and Development (IJTSRD), ISSN No: 2456 – 6470, Volume 1, Issue 5, P. 368-373, 2017.
2017-2018G. Naveen Balaji, S. Chenthur Pandian, “Dynamic and Non-Linear Charge Transfer Through Opto-Deportation by Photovoltaic Cell”, International Journal of Trend in Scientific Research and Development (IJTSRD), ISSN No: 2456 – 6470, Volume 1, Issue 5, P. 486-492, 2017.
2017-2018G. Naveen Balaji, “0.18µm CMOS Comparator for High-Speed Applications”, International Journal of Trend in Scientific Research and Development (IJTSRD), ISSN No: 2456 – 6470, Volume 1, Issue 5, P. 671-674, 2017.
2017-2018G. Naveen Balaji, “Advanced Security System using PIC through Bluetooth”, International Journal of Trend in Scientific Research and Development (IJTSRD), ISSN No: 2456 – 6470, Volume 1, Issue 5, P. 675-685, 2017.
2017-2018M.Saravanan, Deepan.V, Divya.R , Gowri Manohari.S, Gowrishankar.S, “Weaving Loom Monitoring And Control System Using IoT”, International Journal of Advance Research in Science and Engineering.(IJARSE), ISSN: 2319-8354, Volume. 6, Issue: 10, P. 1283-1288, October 2017.
2017-2018M.Saravanan, R.Prasannavenkatesh, S.Poovitha, B.Thiruvarasu, C.Prathepa, “Smart License Based Vehicle Safety And Security System”, International Journal of Advance Research in Science and Engineering.(IJARSE), ISSN: 2319-8354, Volume. 6, Issue: 10, P. 1213-1220, October 2017.
2017-2018T.Prabhu, V.Madhubala, M.Mahalakshmi, “Survey Of Vlsi Multipliers”, International Journal of Advance Research in Science and Engineering.(IJARSE), ISSN: 2319-8354, Volume. 6, Issue: 10, P. 1490-1496, October 2017.
2017-2018S. Srikanth, S. Radhakrishna, S. Naveen Kumar, S. Monish Raj, “A Power Efficient And Enhanced Vlsi Architecture For Vedic Multiplier”, International Journal of Advance Research in Science and Engineering.(IJARSE), ISSN: 2319-8354, Volume. 6, Issue: 10, P. 856-866, October 2017.
2017-2018A.Anandha Raja, S.Jeeva, P.Karthikeyan, N.Karthikeyan, D.Praveen kumar, “Design and Implementation of 256-bit Ripple Carry Adder Design”, International Journal of Advance Research in Science and Engineering.(IJARSE), ISSN: 2319-8354, Volume. 6, Issue: 10, P. 1713-1718, October 2017.
2017-2018Dr. J. Geetha Ramani, Kevin Curran. S, Monali .G, Monisha Shekar,Shasaang. R, “Smart Home Automated Emulator”, International Journal of Scientific Research in Computer Science, Engineering and Information Technology, ISSN : 2456-3307, Volume. 2, Issue: 5, P. 983-989, October 2017.
2017-2018K. Boopathi Raja, T. Prabhu, S. Naveen and K. Pavithra, “Reduction Of The Pepper Effect In OFDM Systems Using Selective Mapping Technique”, International journal of Advanced Research (IJAR), ISSN: 2320-5407, Volume. 5, Issue: 10, P. 1411-1415, October 2017.
2017-2018Swamynathan, “Analysis of 5-Bit Multiplier Using Reversible Logic”, International Journal of Engineering Research in Electronics and Communication Engineering (IJERECE), ISSN: 2394-6849, Volume 4, Issue 12, P. 93-95, December 2017.
2017-2018G. Naveen Balaji, “Design of High Speed 8 Bit Carry Look Ahead Logic for Arithmetic Operations”, International Journal of Engineering Research in Electronics and Communication Engineering (IJERECE), ISSN: 2394-6849, Volume 4, Issue 12, P. 59-62, December 2017.
2017-2018G. Naveen Balaji, S. Chenthur Pandian, “Power Analysis of a Transmission Gate based Scan Flip Flop”, International Journal of Engineering Research in Electronics and Communication Engineering (IJERECE), ISSN: 2394-6849, Volume 4, Issue 11, P. 48-53, November 2017.
2017-2018K. Sumathi, “Water Pollution Indicator using Arduino Uno”, International Journal of Innovations in Engineering and Technology (IJIET), ISSN: 2319-1058, Volume 9, Issue 2, P. 28-39, December 2017.
2017-2018Divya.E, Darshana.J, Giridharan.S, Aswanth.R, “Designing A New Lightweight Encryption To Strengthen Security”, International Journal of Creative Research Thoughts (IJCRT), ISSN: 2320-2882, Volume 5, Issue 4, P. 1331-1334, November 2017.
2017-2018Dr. B. Sivasankari, “IOT based Indoor Air Pollution Monitoring using Raspberry PI”, International Journal of Innovations in Engineering and Technology (IJIET), ISSN: 2319-1058, Volume 9, Issue 2, P. 16-21, December 2017.
2017-2018A. Karthikeyan, U.Kripanya, M.Manish, S.Nivetha, H.Prabanjan, K.Ramkumar, “Cartable Camera Based Assistive Text Recognition for Visually Impaired”, International Journal of Creative Research Thoughts (IJCRT), ISSN: 2320-2882, Volume 6, Issue 1, P. 1650-1654, January 2018.
2017-2018G. Naveen Balaji, “Effective Badminton Coaching Schema Using PIC16F887 Microcontroller”, International Journal of Trend in Scientific Research and Development, ISSN: 2456-6470, Volume 2, Issue 2, P. 1-4, 2017.
2017-2018A.Karthikeyan, S.Sai Gokul, P.Shalini, R.Sowmeya, R.Vinu Varsha, “An Awarding Point Technique in Wi-Fi Sharing System”, International Journal of Creative Research Thoughts (IJCRT), ISSN: 2320-2882, Volume 6, Issue 1, P. 1267-1273, January 2018.
2017-2018A.Karthikeyan, G.Abilesh Raja, B.Habibullah Khan, B.Jefferson, “A Review of vehicle to vehicle communication using Li-Fi technology”, International Journal of Engineering Research in Electronics and Communication Engineering (IJERECE), ISSN: 2394-6849, Volume 5, Issue 1, P. 6-11, January 2018.
2017-2018G. Naveen Balaji, V. Nandhini, S. Mithra, N. Priya, R. Naveena, “IOT Based Smart Crop Monitoring in Farm Land”, Imperial Journal of Interdisciplinary Research (IJIR), ISSN: 2454-1362, Volume-4, Issue-1, P. 88-92, 2018.
2017-2018G. Naveen Balaji, D.Rajesh, S. Sowmya, M. Subashini, P. Suryaprabha, “Power Analysis of an Approximate adders under various interpolation factors for DSP Applications”, International Journal of Engineering and Technical Research (IJETR), ISSN: 2454-4698 (P), Volume-8, Issue-01, P. 379-383, January 2018.
2017-2018R.Sathish Kumar, S.Kavya, S.Manoj, M.Magendran, P.Naveen, “Automatic Error Detection System in Wire Printing Using Raspberry PI”, International Journal of Creative Research Thoughts (IJCRT), ISSN: 2320-2882, Volume 6, Issue 1, P. 1471-1475, January 2018.
2017-2018R.Sathish Kumar, S.Anusha, J.Ashwini, A.Darshana, E.Dharani, “Bio-Metric Voting System Using Aadhaar Card Irrespective of Location”, International Journal of Creative Research Thoughts (IJCRT), ISSN: 2320-2882, Volume 6, Issue 1, P. 1356-1360, January 2018.
2017-2018Dr. J. Ajayan, A. MuthuKumar and T.Ravichandran, “Performance Analysis of Static Carry Skip Adder Using 22nm Strained Silicon CMOS Technology”, International Journal of Advanced Research in Science and Technology, ISSN: 2319-1783, Volume 7, Issue 1, pp. 732-735, 2018.
2017-2018Dr. J. Ajayan, P. Santhosh Kumar, S. Saravanan, S. Sivadharini, R. Sophia, “Development of Smart Mirror using Raspberry-Pi 3 for Interactive Multimedia”, International Journal of Advance Research in Science and Engineering.(IJARSE), ISSN: 2319-8354, Volume. 7, Special Issue: 2, P. 929-937, February 2018.
2017-2018Dr. J. Ajayan, R. Keerthikga, R. Kiruthiga, V. J. Mohen, M. Priyadharshini, “An Approach for Prioritizing Emergency Vehicle and Efficient Traffic Flow”, International Journal of Innovations in Engineering and Technology (IJIET), ISSN : 2456-3307, Volume. 3, Issue: 1, P. 1325-1329, February 2018.
2017-2018Dr. T.Prabhu, K.S.Adhith Gowtham, S.Gowtham, D.Jeevitha, R.Jeevithra, “Recent Advances In Vehicle To Vehicle Communication: Survey”, International Journal of Innovations in Engineering and Technology (IJIET), ISSN: 2319-1058, Volume 9, Issue 3, P. 39-45, February 2018.
2017-2018Dr. G. Naveen Balaji, S. Mythili, A. Karthikeyan, “An Efficient Brain Tumor Detection Algorithm based on Segmentation for MRI System”, International Journal of Trend in Scientific Research and Development (IJTSRD), ISSN No: 2456 – 6470, Volume 2, Issue 2, P. 1353-1358, 2018.
2017-2018Karthika A, ThaanuPrabha A. S, Surya Swetha V.P, Sivasankari R, Sethupathi M, “Identification of Sea-Ice Floes and the Floe Size Distributions using Image Processing Techniques”, International Journal For Research & Development In Technology, ISSN (O) :- 2349-3585, Volume-9,Issue-2, P. 49-60, February-2018.
2017-2018Dr. B. Sivasankari, “Raspberry Pi Based Intelligent Autonomous Campus Mobility Services”, International Journal of Scientific Research in Computer Science, Engineering and Information Technology, ISSN : 2456-3307, Volume 3, Issue 1, P. 1457-1461, 2018.
2017-2018S.Vigneshwaran,T.Sandhya, K.Sanjay,T.Santhya, S.Saranya, “Iot Based Nitrate Measurement And Environment Monitoring System”, International Journal of Advance Research in Science and Engineering.(IJARSE), ISSN: 2319-8354, Volume. 7, Issue: 2, P. 157-168, February 2018.
2017-2018M.Jagadesh, M.Karthik, A.Manikandan, S.Nivetha, R.Prasanth Kumar, “IoT Based Aeroponics Agriculture Monitoring System Using Raspberry Pi”, International Journal of Creative Research Thoughts (IJCRT), ISSN: 2320-2882, Volume 6, Issue 1, P. 601-608, February 2018.
2017-2018R.Sathishkumar, M.Ragul, K.Ranjithkummar, K.Saisathya, P.Srinivasan, “Implementation Of Smart Plug Using Internet Of Things”, International Journal of Creative Research Thoughts (IJCRT), ISSN: 2320-2882, Volume 6, Issue 1, P. 375-381, February 2018.
2017-2018K.Boopathi Raja, M.Saranya, R.Shahana, S.Sreeraj, R.M.Vishnu, “Assorted Security System to Defend Intrusion”, International Journal of Advance Research in Science and Engineering.(IJARSE), ISSN: 2319-8354, Volume. 7, Special Issue: 2, P. 762-774, February 2018.
2017-2018Dr. J. Geetha Ramani, “Next Gen Smart Emulator”, International Journal Of Research Culture Society, ISSN: 2456-6683, Volume – 2, Issue – 2, P. 39-46, Feb – 2018.
2017-2018Anandha Raja.A, R.Reshma Sahin, k.Sanheetha, P.Sankareswari, M.Vimal Raj, “A Road Sign Detection and Recognition for Driver Assistance Systems using Raspberry pi”, International Journal of Creative Research Thoughts (IJCRT), ISSN: 2320-2882, Volume 6, Issue 1, P. 871-875, March 2018.
2017-2018Anandha Raja.A, Bharathi Kannan.R.K, Parthiban.V.K, Naveen.T, Komala.N, “A Prototype Model of Plastic Rice and Synthetic Egg Detection”, International Journal of Creative Research Thoughts (IJCRT), ISSN: 2320-2882, Volume 6, Issue 1, P. 893-897, March 2018.
2017-2018Karthika A, Hamshini K S, Haritha T, Indumathi M, Janani V, “Analysis of Object Detection in High-Resolution Images Using Rotation Invariant Method”, International Journal of Creative Research Thoughts (IJCRT), ISSN: 2320-2882, Volume 6, Issue 1, P. 521-528, March 2018.
2017-2018G. Naveen Balaji, “Novel Design of Gasoline Purity Meter in IC Engine Based Automobile Applications”, International Journal of Latest Technology in Engineering, Management & Applied Science (IJLTEMAS), ISSN 2278-2540, Volume 7, Issue 3, P. 60-67, March 2018.
2017-2018Dr. J.Geetha Ramani, R.Sangeetha, V.Ajith Kannan, S.Vishali, “Internet of Things Based Global Industrial Process Monitoring and Controlling Through Wireless Communication”, International Journal of Engineering and Technical Research (IJETR), ISSN: 2454-4698 (P), Volume-8, Issue-3, P. 40-44, March 2018
2017-2018Gautami Alagarsamy, J.Shanthini, “Fostering a high efficient waveguide diplexer to improve 5G network frequency spectrum for IoT devices in cloud”, International Journal of Engineering & Technology, ISSN: 2319 – 1058, Volume-7, P. 228-230, 2018.
2017-2018M. Jagadesh, S. Rajamanickam, S. P. Saran, S. Shiridi Sai, M. Suresh, “Wireless Sensor Network Based Agricultural Monitoring System”, International Journal of Creative Research Thoughts (IJCRT), ISSN: 2320-2882, Volume 6, Issue 1, P. 502-509, March 2018.
2017-2018M. Jagadesh, S. Aishwarya, Anusree Pattayil, S.Gunavendhan, S. Sree Vishnu, “Smart Mirror Using Raspberry PI”, International Journal of Creative Research Thoughts (IJCRT), ISSN: 2320-2882, Volume 6, Issue 1, P. 863-870, March 2018.
2017-2018S.Prabu Venkateswaran, J.Mercy, R.Lawanya, M.Nashreen Banu, “Detection Of Driver Fatigue Based On Visual Analysis Of Eye State”, International Journal Of Innovative Research Explorer, ISSN NO: 2347-6060, Volume 5, Issue 3, P. 112-117, March 2018.
2017-2018A. Karthikeyan, “Arduino Based Small and Shortrange Obstacles Tracking Radar System”, The International Journal of Agricultural Science, Research and Technology (IJASRT), ISSN : 2395-1052, Volume 4, Issue 4, P. 2437-2441, April 2018.
2017-2018S. Mythili, Senthil .K.M, D. Sathiesh Kumar, S. Soundarya, “High Speed Kogge Stone Adder Design”, IJSRD – International Journal for Scientific Research & Development, ISSN : 2321-0613, Volume. 6, Issue 02, P. 2901-2904, 2018.
2017-2018S. Prema, S. Madhusudan, T. Nagaraj, R. Mythili, N. Mohana priya, K.Ishwarya, “High performance and Efficient Low Power Shift Register using Pulsed latches”, International Journal For Research & Development In Technology, ISSN (O) :- 2349-3585, Volume-9, Issue-4, P. 95-98, April-2018.
2017-2018S. Prema, P. Kokila, M. Praveena, D. Monikadharshni, V. Priyadarshini, “Energy Optimization Clustering Algorithm for Wireless Sensor Network”, International Journal For Research & Development In Technology, ISSN (O) :- 2349-3585, Volume-9, Issue-4, P. 595-598, April-2018.
2016-2017N.Rajeswaran, C.Gokilavani, “Reduction of FBM Noise in Brain MRI Images Using Wavelet Thresholding Techniques”, Asian Journal of Information Technology, ISSN: 1682 – 3915, Volume:15, Issue: 5, pp.855-861, 2016. (UGC Approved Journal)
2016-2017R.ArunSekar, G.NaveenBalaji, A.Gautami and B.Sivasankari, “High Efficient Carry Skip Adder in Various Multiplier Structures”, Advances in Natural and Applied Sciences, ISSN: 1995 – 0772, Volume:10 Issue: 14 pp.193-197, 2016.
2016-2017M.Saravanan, “Analysis of Gabor Filter and Homomorphic Filter for Removing Noises in Ultrasound Kidney Images”, International Journal of Electrical and Electronics Engineers, ISSN(O):2321-2055, ISSN(P):2321-2047, Volume No.08, Issue 02,July – December 2016.
2016-2017B.Sivasankari, “Approximate Carry Select Adder Based Multiplierless Multiplication (AMLM)”, Middle East Journal of Scientific Research, ISSN:1990-9233, Vol(24) issue(9), 2016.
2016-2017G.NaveenBalaji, V.Narayanan and V.S.Nivash, “Low Power and High Performance JK Flip flop Using 45 nm Technology”, International Journal of Engineering Research in Electronics and Communication Engineering (IJERECE), Vol 3 Issue 10, Oct – 2016.
2016-2017R.Sathish Kumar, Dr.B.Nagarajan and R.Karthikamani, “Security Enhancement for Automated Captcha Recognition System in Web Pages”, Transylvanian Review, Vol XXIV No.10 Special Issue, 2016.
2016-2017B.Sivasankari and P.Poongodi, “Design and Analysis of Various Optimization Techniques for Correlators”, Journal of Chemical and Pharamaceutical Sciences, ISSN:0974-2115, vol (10) Issue (1), pp:755-758, January – March, 2017
2016-2017S.Srikanth, A.Santhosh Kumar, K.Boopathi Raja and M.Jagadesh, “Vhdl Design and Analysis of 2-Dimensional Discrete Wavelet Transform, Middle East Journal of Scientific Research, ISSN:1990-9233, Vol 24, Issue 2, 2016.
2016-2017A.Karthikeyan, S.Vigneshwaran, A.Santhosh Kumar, S.Srikanth, “Energy Saving System using Embedded System for Street Light Controller”, International Journal of Advance Research in Science and Engineering, ISSN (O):2319-8354 ISSN(P):2319-8346, Vol.No.6, Issue No.1, January 2017.
2016-2017T.Prabhu, Dr.S.Chenthur Pandian, “Different Values of Substrate Material for Planar Inverted F-Antenna”, International Journal of Electrical and Electronics Engineers, ISSN (O):2321 – 2055, ISSN(P): 2321 – 2045, Vol No.9, Issue 01, January – June 2017.
2016-2017Athira.V.S., R.Arun Sekar, “Design Efficient Carry Select Adder & Its Implementation in Vedic Multiplier”, Advances in Natural and Applied Sciences, ISSN: 1995 – 0772, Volume:10 Issue: 19, December, 2016.
2016-2017M.Saravanan, T.Prabhu, A.Santhosh Kumar, M.Jagadesh and M.Udayamoorthi, “Analysis and Implementation of Mean, Maximum and Adaptive Median for Removing Gaussian Noise and Salt & Pepper Noise in Images”, Middle East Journal of Scientific Research, ISSN:1990-9233.
2016-2017G.NaveenBalaji, E.Christina Dally, M.Srinivasaperumal and K.Boopathi Raja, “Concurrent Node Recovery from Failure in Wireless Sensor Networks”, Advances in Natural and Applied Sciences, ISSN: 1995 – 0772, 2017.
2016-2017Gautami.A, S.Priya, S.Mythili, R.Sathish Kumar, “Design and Implementation of Corrugated Circular Loop Antennas in Wireless Power Transfer Technology”, IIOAB- Institute of Integrative Omics and Applied Biotechnology, Vol. 8. n2s, Mar,2017.
2016-2017S.Priya, R.Sathish Kumar, R.Prabha, S.Baskar, “Optimized Direct Mehod Routing for Cache Memory in RISC Architecture”, IIOAB- Institute of Integrative Omics and Applied Biotechnology, Vol8n2s, Mar, 2017.
2016-2017D.Ruth Anitha Shirley, G.V.Aswini, D.Selena Josephine Ponmani, K.Sumathi and E.Chistina Dally, “A Dignostic Study of Power Switches”, Advances in Natural and Applied Sciences, ISSN: 1995 – 0772, 8-January 2017.
2016-2017S.Srikanth, S.Poovitha, R.Prasannavenkatesh and S.Naveen, “ An Efficient VLSI Architecture for 64-Bit Vedic Multiplier”, International Journal of Electrical and Electronics Engineers, ISSN(O):2321-2055 ISSN(P):2321-2045, Vol.No.9, Issue No.1, January – June, 2017.
2016-2017G.Naveen Balaji, R.Prabha, E.Shanthini, J.Jayageetha and Mohand Lagha, “Rapid Low Power Synchronous Circuits Using Transmission Gates”, Advances in Natural and Applied Sciences, ISSN:1995-0772,EISSN:1998-1090, vol10(17), pp287-291, December,2016.
2016-2017G,Naveen Balaji, V.Aathira, K.Ambhikavathi, S.Geethiga, R.Havin, “Low Power and High Speed Synchronous Circuits using Transmission Gates”, Asian Research Journal, ISSN: 2249-7315, Vol.7 No.2, pp 713-720, February 2017.
2016-2017G.Naveen Balaji, S.Chenthur Pandian, D.Rajesh, “Fast Test Pattern Generator using ATALANTA M 2.0”, Asian Research Journal, ISSN: 2249-7315, Vol.7 No.2, pp 721-729, February 2017.
2015-2016Dr.N.Rajeswaran,T.Prabhakaran, S.Mythili,S.PrabhuVenkateswaran, “Modeling and Power Analysis of Dual Phase Low Power Charge Pump Circuit Design”, International Conference on Green Engineering and Technologies, ISSN: 0973-4562, IC-GET, 2015.
2015-2016Dr.N.Rajeswaran,C.Gokilavani, R.Sathishkumar,” Noise Adaptive Fuzzy Switching Median Filters for Removing Gaussian Noise and Salt & Pepper Noise in Retinal Images”, Middle East Journal of Scientific Research, vol 24(2), pp 475-478, ISSN: 1990-9233, 2016.
2015-2016K.Sumathi ,D.Ramya, “Automatically Identifying the Text Name Detection with Speech Output for Blind Persons”, International Research Journal of Engineering and Technology, Volume: 02 Issue: 02, ISSN:2394-4099, Mar-2016.
2015-2016Arunsekar. R,” VLSI Implementation of Cordic Based Robot Navigation Processor”, International Research Journal of Engineering and Technology, Volume: 03 Issue: 02 , ISSN: 2395-0072, Feb-2016.
2015-2016Arunsekar. R, “An Efficient Implementation Of 128 Bit Carry Save Adder”, International Journal of Emerging Technology in Computer Science & Electronics, Volume 11 Issue 5 , ISSN: 0976-1353, November 2014.
2015-2016Prabha.R,” Mobile Sink-Assisted Clustering Protocol for Multi-hop Wireless Sensor Network”, International Journal of Computing, Vol 5,issue 4, ISSN (Print):2231:2153, October 2015.
2015-2016D.Deepika, Prabha.R,” Path Optimization Of Mobile Sink for Energy Efficient Data Transmission”, International Researc.h Journal of Engineering and Technology, Volume: 02 Issue: 02, ISSN:2395-0072, Mar-2016
2015-2016Jayageetha.J, K.Poomala,”MRF Model for Detecting Abnormal Activities in Crowded Environment”, International Journal of Scientific Research in Science, Engineering and Technology, Vol 2, Issue 2 pp 848, ISSN:2394-4099, March 2016.
2015-2016Jayageetha.J, Viji.A,” Survey of Packet Drop Prevention in Mobile Adhoc Networks”, International journal of Computing, Vol 5 issue 4, ISSN (Print):2231:2153, October 2015.
2015-2016Jayageetha.J, K.Poomala,” Comparative Survey on Image Denoising of Hyperspectral Images”, International Research Journal of Engineering and Technology, Volume: 02 Issue: 08, ISSN:2395-0072, Nov-2015.
2015-2016Ardra George, Geetharamani.J ,” Survey on Various Designs of Monopole Blade Antenna”, International Journal of Computing, Vol 5 issue 4, ISSN (Print):2231:2153, October 2015.
2015-2016Divya.M,Geetharamani.J,” Design of Dual Band Microstrip Patch Antenna for WLAN
Application”, International Journal Of Engineering Sciences & Research Technology, Vol 4(11): pp 252-256, ISSN:2277-9655, November, 2015.
2015-2016R.Gokul,J.Geetharamani,” A Novel Tri Band Planar Inverted F Antenna for Wireless Communication”, Middle-East Journal of Scientific Research, 24 (3): 695-700, ISSN 1990-9233, 2016.
2015-2016Sreeja.G , Shanthini.E,” A Survey on various Techniques used for Traffic Monitoring System”, International Journal Of Electronics Circuits And Systems Vol 5,issue 1, ISSN:2277-5870, Jan 2016.
2015-2016Shanthini.E,Sreeja.G,” Improved Traffic Control Systems for Emergency Vehicle Clearance and Stolen Vehicle Detection”, International Research Journal of Engineering and Technology Volume: 03, Issue: 03, ISSN: 2395-0072, Mar-2016.
2015-2016Ashabanu.D,Guruprakash.G, Kalaiarasan.G,Kanmani,Shanthini.E,” Maritime Border Tracking And Alert System for Fishermen”, Journal o Mobile Applications & Technologies, l l n Vol. 2 No. 2 May – July 2015
2015-2016K.Anuradha andM.Saravanan, “Design and Development of a Portable ECG Acquisition System”, International Journal of Advanced Research in Computer and Communication Engineering, ISSN(online): 2278 – 1021, ISSN (print): 2319 – 5049,Vol 5, Issue 2, Feb, 2016.
2015-2016K.Sathya andM.Saravanan, “Fast and Wide Range Voltage Conversion Technique by using 45nm Technology”, International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering, ISSN(online): 2321 – 2004, ISSN (print): 2321 – 5526, Vol 4, Issue 3, Mar, 2016.
2015-2016S.Prabuvenkateswaran, “RNS Moduli Set {2^(n+1)-1,2^(n)-1,2^n} Implementation Based on Fast Sign Detection Algorithm”, International Journal of Modern Trends in Engineering and Research, e-ISSN:2349 – 9745, p-ISSN: 2393 – 8161, Vol 2, Issue 10, 10 Oct, 2015.
2015-2016B.Sivasankari andDeepasri, “Advanced Interconnect Protocols Using High- Performance Deadlock-Free ID Assignment”, International Journal of Modern Trends in Engineering and Research (IJMTER), ISSN (Online):2349–9745; ISSN (Print):2393-8161, Volume 02, Issue 10, Oct, 2015.
2015-2016B.Sivasankari, “Automated Control System for Poultry Farm Based on Embedded System”, International Research Journal of Engineering and Technology (IRJET), e-ISSN:2395 – 0056, p-ISSN: 2395 – 0072, Vol 3, Issue 3, Mar, 2016.
2015-2016S.Vigneshwaran, A.Santhoshkumar andS.Srikanth, “Design and Analysis of Active High Pass, Low Pass & Band Pass Butterworth Filters Using LM741”, International Journal of Engineering Science and Computing, ISSN: 2321 – 3361, Vol 6, Issue 4, Apr, 2016.
2015-2016M.InduandR.ArunSekar, “High Performance Baugh Wooley Multiplier using Carry Skip Adder Structure”, International Journal of Modern Trends in Engineering and Science, ISSN: 2348 – 3121, Vol 3, Issue 3, 2016.
2015-2016N.Prabhu, T.Ravichandran andS.Vigneshwaran, “Performance Analyzing of CMOS Gates by Sub Clocking Method Using Cadence Tools”, International Journal of Scientific Research in Science, Engineering and Technology IJSRSET, Print ISSN: 2395-1990, Online ISSN: 2394-4099, Volume 2 Issue 2, 27 Mar, 2016.
2015-2016J.Sherly andT.Prabhu, “An Energy Efficient Routing Protocol based on the Combination of Genetic Algorithm and K-Meansf Extending the Lifetime of Wsn’s”, International Journal of Scientific Research in Science, Engineering and Technology IJSRSET, Print ISSN: 2395-1990, Online ISSN: 2394-4099, Volume 2 Issue 2, pp 556-559, 31 Mar, 2016.
2015-2016R. AshwinyAmala Mary andA.Karthikeyan, “An Efficient Warning System for Human Elephant Conflict”, International Journal of Scientific Research in Science, Engineering and Technology IJSRSET, Print ISSN: 2395-1990, Online ISSN: 2394-4099, Volume 2 Issue 2, 26 Mar, 2016.
2015-2016G.NaveenBalaji and S. ChenthurPandian, “Novel Automatic Test Pattern Generator (ATPG) for degenerated SCAN – BIST VLSI Circuits”, International Research Journal of Engineering and Technology (IRJET), e-ISSN: 2395 -0056, p-ISSN: 2395-0072, Volume: 03 Issue: 03, Mar, 2016.
2015-2016D.Rajesh and G. Naveen Balaji, “Linear Assembly in ATPG Application in Fast SCAN – BIST VLSI Circuits”, International Journal of Innovations in Engineering and Technology, ISSN: 2319 – 1058, Vol 6, Issue 3, Feb, 2016.
2015-2016M.Gayathri, M.HariPriyaand GokilavaniChinnasamy, “A Survey on factors causing power consumption and their reduction techniques of embedded Processors”, International Journal of Applied Research, ISSN Print: 2394-7500 ISSN Online: 2394-5869, Volume 2, Issue 2,pp 766-769, 26 Jan, 2016.
2015-2016M.Srinivasaperumal, “Heterogeneous Node Recovery from Crash in Wireless Sensor-Actor Networks”, International Journal of Modern Trends in Engineering and Science, ISSN:2348-3121, Vol 3, Issue 6, 2016.
2015-2016S.Monica, R.Prabha and R.Alwin, “An Effective System of Detecting the Spying Assault in Wireless Sensor Networks”, International Research Journal of Engineering and Technology (IRJET), e-ISSN: 2395 -0056, p-ISSN: 2395-0072, Volume: 02 Issue: 07, Oct, 2015.
2015-2016S.Monica and R.Prabha, “Compression of 3D Video Using Huffman Coding”, International Journal of Scientific Research on Science, Engineering and Technology, Print ISSN:2395-1990, Online ISSN:2394-4099, Vol 2 Issue2, 05 Apr, 2016.
2015-2016D.Monisha.D and V.J.ArulKarthick, “An Efficient Design of Parallel Pipelined Encoder Architecture for Long Polar Codes”, International Research Journal of Engineering and Technology (IRJET), e-ISSN: 2395 -0056, p-ISSN: 2395-0072, Volume: 03 Issue: 03, Mar, 2016.
2015-2016A. Nandhini and V. J. Arul Karthick, “Breast Cancer Detection Using Cluster Algorithm and Topology Creation”, International Journal of Scientific Research on Science, Engineering and Technology, Print ISSN:2395-1990, Online ISSN:2394-4099, Vol 2 Issue2, pp 116-120, Mar, 2016.
2015-2016J. GeethaRamani, “Compact Planar Inverted L Antenna for Mobile WiMax Applications”, International Journal of Scientific Research on Science, Engineering and Technology, Print ISSN:2395-1990, Online ISSN:2394-4099, Vol 2 Issue3, 12 May, 2016.
2015-2016G. Naveen Balaji, K. Ambhikavathi and S. Geethiga, “Master–Slave Flip- Flops Using Transmission Gate By Accessing High Speed Design Values”, International Journal of Emerging Trends in Science and Technology, ISSN 2348-9480, Vol.03, Issue05, pp 363-368, May, 2016.
2015-2016A. Santhosh Kumar, K. Boopathiraja, M. Jagadesh and S. Srikanth, “Vhdl Design and Analysis of 2-Dimensional Discrete Wavelet Transform”, Middle East Journal of Scientific Research, ISSN: 1990-9233, Vol 24, Issue 2, 2016.
2015-2016P. Rajesh, T. Nivethitha, B. YaminiPriya and S. Srikanth, “Synthesizable Design and Simulation Analysis ofImproved Performance of Reversible Circuits Using Conservative Logic Gates”, Middle-East Journal of Scientific Research, ISSN 1990-9233, Vol 24, Issue 2, pp 479-483, 2016.
2015-2016M. Srinivasaperumal, M. Jagadesh, T. Prabhu and K. Boopathi Raja, “Detection and Analysis of Spoofing Attackers in Wireless Sensor Networks”, Middle-East Journal of Scientific Research, ISSN 1990-9233, Vol 24, pp 63-67, 2016.
2015-2016Divya Mathew and J. GeethaRamani, “A Microtsrip Patch Antenna for GPS/WIMAX Applications”, Middle-East Journal of Scientific Research, ISSN 1990-9233, Vol 24 (5): pp 1658-1661, 2016.
2015-2016E.Shanthini, “EEG Signal Classification Using Ensemble Empirical Mode Decomposition”, International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering, ISSN:2321-2004, Vol 4, Issue 4, Apr, 2016.
2015-2016A.Mythili and T.Prabakaran, “A Survey on Cluster Head Formation and its Related Routing Protocols in Wireless Sensor Networks”, International Journal of Computing, ISSN (Print):2231:2153, ISSN (Online):2230:9039, Vol 5, issue 4, Oct, 2015.
2015-2016G. Naveen Balaji, S. ChenthurPandian and D. Rajesh, “A survey on effective Automatic Test Pattern Generator for self- checking Scan – BIST VLSI circuits”, International Research Journal of Engineering and Technology (IRJET), e-ISSN: 2395 -0056, p-ISSN: 2395-0072, Volume: 03 Issue: 05, May, 2016.
2015-2016G.Naveen Balaji,N.V.HariSuriya, S.Anandvikash, B.Adithya and S.Arun Kumar, “Cost Effective Power Supply Based on Transformer-Less Circuitry Using Bridge Rectifier”, International Journal of Engineering Research-Online, ISSN: 2321-7758, Vol.4., Issue.3., May-June, 2016.
2015-2016N.Thamizhamuthan andT.Prabakaran, “Network Lifetime Enrichment Protocol for Wireless Sensor Networks Using EESEP Protocol”, International Research Journal of Engineering and Technology (IRJET), e-ISSN: 2395 -0056, p-ISSN: 2395-0072, Volume: 02 Issue: 07, Oct, 2015.
2015-2016N. Thamizhamuthan, T. Prabakaran and A. Mythili, “Self-Configurable Clustering Mechanism for QOS Routing Protocol”, International Journal of Scientific Research in Science, Engineering and Technology IJSRSET, Print ISSN: 2395-1990, Online ISSN: 2394-4099, Volume 2 Issue 1, pp 45-48, 10 Mar, 2016.
2015-2016S.M.Swamynathan andV.Bhanumathi, “Power Efficient Fixed width and Full Precision Pipelined Re-Configurable Multiplier”, International Journal of Applied Engineering Research, ISSN: 0973-4562, Vol 10, July, 2015.
2015-2016G.NaveenBalaji, V.Aathira, K. Ambhikavathi, S. Geethiga and R. Havin, “Combinational Circuits using Transmission Gate Logic for Power Optimization”, International Research Journal of Engineering and Technology (IRJET), e-ISSN: 2395 -0056, p-ISSN: 2395-0072, Volume: 03 Issue: 05, May, 2016.
YearPaper details
2019 -2020R.Karthick, ASP from EEE Department has published a Research Paper on “Investigating the Transient Performance of Stranded Wind-Diesel Hybrid Power System” in Journal of Mechanics of Continua and Mathematical Sciences on February 2020, doi.org/10.26782/jmcms.spl.7/2020.02.00011
S.Chenthur Pandian, Professor from EEE Department has published a Research Paper on “Design and Development of Planar Antenna Array for MIMO Application”, in Wireless Networks on 14 January 2020, doi.org/10.1007/s11276-020-02253-y.
R.Karthick, ASP from EEE Department has published a Research Paper on “Investigating the Transient Performance of Stranded Wind-Diesel Hybrid Power System” in Journal of Mechanics of Continua and Mathematical Sciences on February 2020, doi.org/10.26782/jmcms.spl.7/2020.02.00011
S.Chenthur Pandian, Professor from EEE Department has published a Research Paper on “Design of Test Pattern Generator (TPG) by an Optimized Low Power Design for Testability (DFT) for Scan BIST Circuits using Transmission Gates”, in  Cluster Computing on November 2019, doi.org/10.1007/s10586-018-2552-x
S.Chenthur Pandian, Professor from EEE Department has published a Research Paper on “Designing a Trivial Information Relaying Scheme for Assuring Safety in Mobile Cloud Computing Environment”, in Wireless Networks on 16 August 2019, doi.org/10.1007/s11276-019-02113-4
2018-2019S.Chenthur Pandian, Professor from EEE Department has published a Research Paper on “Mitigation of PQ Issues using an Enhanced UPQC-based ANN Approach”, in Journal of Circuits, Systems and Computers on March 2019, https://doi.org/10.1142/S0218126619500464
R.Vijayakumar, Assistant Professor from EEE department has published a Research Paper on “Design and Implementation of Grid Connected Solar/Wind/Diesel Generator Powered Charging Station for Electric Vehicles with Vehicle to Grid Technology Using IoT” in International Journal of Current Signal Transduction Therapy, Bentham Science Publishers on 1 August 2018.
Senthilkumar Rasappan, Associate Professor from EEE department has published a Research Paper on “A Novel Switching Strategy for Single Phase Universal Matrix Converter with Hardware Implementation” in Journal of Electrical Engineering on 2018.
C.Aishwarya, Assistant Professor from EEE Department has published a Research Paper on “Handwritten Character Recognition Using Artificial Neural Network (ANN)” in Journal of Signal Processing and Wireless Networks on 2018
R.Rajasekaran, Assistant Professor from EEE Department has published a Research Paper on “On the Dynamics of Floating Solar Power Plant: Opportunity for Sustainable Energy Generations” in International Journal of Advanced Research in Dynamical & Control Systems on 2018
M.Poornima, Assistant Professor from EEE Department has published a Research Paper on “Plug-in Electric Vehicle Supported DVR for Fault Mitigation and Uninterrupted Power Supply in Distribution System”, in IEEE Xplore Digital Library on 13 December 2018, 10.1109/ICSNS.2018.8573624
S.Bharath, Assistant Professor from EEE Department has published a Research Paper on “Plug-in Electric Vehicle Supported DVR for Fault Mitigation and Uninterrupted Power Supply in Distribution System”, in IEEE Xplore Digital Library on 13 December 2018, 10.1109/ICSNS.2018.8573624
R.Vijayakimar, Assistant Professor from EEE Department has published a Research Paper on “Plug-in Electric Vehicle Supported DVR for Fault Mitigation and Uninterrupted Power Supply in Distribution System”, in IEEE Xplore Digital Library on 13 December 2018, 10.1109/ICSNS.2018.8573624
R.Rajasekaran, Assistant Professor from EEE Department has published a Research Paper on “Research Issues in DFIG Based Wind Energy System” in Electronics journal on 1 June 2018
Karthick.R, Associate Professor from EEE Department has published a Research Pape on “Optimized Design and Control of a Standalone Hybrid Power System using Modified Cuckoo Search Algorithm” in International Journal of Innovative Technology and Exploring Engineering, March 2019, ES3498018319/19©BEIESP
R.Vijayakumar, Assistant Professor from EEE Department has published a Research Paper on “Design of Public Plug in Electric Vehicle Charging Station for Improving LVRT Capability of Grid Connected Wind Power Generation ” in IEEE Xplore Digital Library on 13 December 2018, 10.1109/ICSNS.2018.8573632
R.Vijayakumar, Assistant Professor from EEE Department has published a Research Paper on “Design of Residential Plug in Electric Vehicle Charging Station with Time of Use Tariff and IOT technology” in IEEE Xplore Digital Library 13 December 2018, 10.1109/ICSNS.2018.8573637
2017-2018R.Vijayakumar, Assistant Professor from EEE Department has published a Research Paper on “Smart Electric Vehicle Charging Infrastructure using Internet of Things” in International Journal of Innovations & Advancement in Computer Science on August 2017
R.Vijayakumar, Assistant Professor from EEE Department has published a Research Paper on “Control and Management Scheme of PV Integrated Charging Facilities for PEVs with Texas CC3200 IoT Technology” in International Journal of Engineering Technology Science and Research on September 2017
R.Vijayakumar, Assistant Professor from EEE Department has published a Research Paper on “Design of Renewable Energy Based PEVs Charging Station with Energy Management Technique” in Journal of Advanced Research in Dynamical and Control Systems on September 2017
S.Bharath, Assistant Professor from EEE Department has published a Research Paper on “Reduced Order Generalized Integrators Based Collective Control Strategy for DFIG System During Network Instability” in International Journal of Electronics, Electrical and Computational System on October 2017
S.Chenthur Pandian, Professor from EEE Department has published a Research paper on “High Performance Triplex Adder Using CNTFET” International Journal of Trend in Scientific Research and Development on August 2017, https://doi.org/10.31142/ijtsrd2300
S.Chenthur Pandian, Professor from EEE Department has published a Research paper on “Design for Testability of Kip bond Logic” in Perspectivas em Ciência da Informação School of Information Science of the Federal University of Minas Gerais (UFMG) on November 2017
S.Chenthur Pandian, Professor from EEE Department has published a Research paper on “Dynamic and Non-Linear Charge Transfer Through Opto-Deportation by Photovoltaic Cell” in International Journal of Trend in Scientific Research and Development on July 2017, DOI: 10.31142/ijtsrd2329
S.Chenthur Pandian, Professor from EEE Department has published a Research paper on “Power Analysis of a Transmission Gate based Scan Flip Flop”, in International Journal of Engineering Research in Electronics and Communication Engineering (IJERECE) on November 2017
S.Chenthur Pandian, Professor from EEE Department has published a Research paper on “65nm TGMS flipflops for High Speed Design Standards”, in Advances in Natural and Applied Sciences, on May 2018
S.Chenthur Pandian, Professor from EEE Department has published a Research paper on “A Novel Scheme for Safeguarding Confidentiality in Public Clouds for Service Users of Cloud Computing” in Cluster Compute-Springer on 19 Sep 2017, DOI 10.1007/s10586-017-1178-8
C.Aishwarya, Assistant Professor from EEE Department has published a Research paper on“Design and Implementation of Precautionary Controller for Mobile Phone Accidents While Driving” in International Journal of Scientific Research in Science, Engineering and Technology on Dec 2017
R.Karthick, Associate Professor from EEE Department has published a Research paper on “Adaptive Fuzzy based UPFC Controller for Transient Stability Analysis in Autonomous Wind-Diesel Hybrid System” in International Journal of Pure and Applied Mathematics on 2018, 10.12732/ijpam.v118i11.82
C.Aishwarya, Assistant Professor from EEE Department has published a Research paper on “Novel Energy Efficient Carry Skip Adder based on Dual Mode Logic Design” in International Journal of Advance Engineering and Research Development on Feb.-2018
J R Beny, Assistant Professor from EEE Department has published a Research paper on “Novel Energy Efficient Carry Skip Adder based on Dual Mode Logic Design” in International Journal of Advance Engineering and Research Development on Feb.-2018
R.Rajasekaran, Assistant Professor from EEE Department has published a Research paper on “Novel Energy Efficient Carry Skip Adder based on Dual Mode Logic Design” in International Journal of Advance Engineering and Research Development on Feb.-2018
G.Abirami, Assistant Professor from EEE Department has published a Research paper on “Novel Energy Efficient Carry Skip Adder based on Dual Mode Logic Design” in International Journal of Advance Engineering and Research Development on Feb.-2018
R.Rajasekaran, Assistant Professor from EEE Department has published a Research paper on “Superconducting Me-Fc Limiter with Stat Compensator in DFIG” in International Journal of Recent Trends in Engineering and Research on January – 2018 DOI:10.23883/IJRTER.2018.4042.
G.Abirami, Assistant Professor from EEE Department has published a Research paper on “Superconducting Me-Fc Limiter with Stat Compensator in DFIG” in International Journal of Recent Trends in Engineering and Research on January – 2018 DOI:10.23883/IJRTER.2018.4042.
C.Aishwarya, Assistant Professor from EEE Department has published a Research paper on “Superconducting Me-Fc Limiter with Stat Compensator in DFIG” in International Journal of Recent Trends in Engineering and Research on January – 2018 DOI:10.23883/IJRTER.2018.4042.
R R Beny, Assistant Professor from EEE Department has published a Research paper on “Superconducting Me-Fc Limiter with Stat Compensator in DFIG” in International Journal of Recent Trends in Engineering and Research on January – 2018 DOI:10.23883/IJRTER.2018.4042.
R.Senthil kumar Associate Professor from EEE Department has published a Research paper on “A Novel Switching Strategy for Realization of Single Phase Matrix Converter as a Universal Power Electronic Converter” in International Journal of control theory and Applications on 2017
C.Ramakrishnan, Associate Professor from EEE Department has published a Research paper on”Voltage Sensorless Controller for Photovoltaic Integrated Shunt Active Power Filter for Enhancement of Power Quality” in International Journal of Testing and Evaluation on January 2018, doi.org/10.1520/JTE20170019
C.Ramakrishnan, Associate Professor from EEE Department has published a Research paper on “Performance Analysis of Voltage Stateless Controller for Renewable-Energy-Supported Shunt-Active Power Filter” in International Journal of Testing and Evaluation on May 2017, https://doi.org/10.1520/JTE20150509
C.Aishwarya, Assistant Professor from EEE Department has published a Research paper on “The EXAS Method an Education Initiative” in International Journal of Innovative Research Explorer on January 2018
J R Beny, Assistant Professor from EEE Department has published a Research paper on “The EXAS Method an Education Initiative” in International Journal of Innovative Research Explorer on January 2018
R.Rajasekaran, Assistant Professor from EEE Department has published a Research paper on “The EXAS Method an Education Initiative” in International Journal of Innovative Research Explorer on January 2018
G.Abirami, Assistant Professor from EEE Department has published a Research paper on “The EXAS Method an Education Initiative” in International Journal of Innovative Research Explorer on January 2018
J R Beny, Assistant Professor from EEE Department has published a Research paper on“Design and Implementation of Precautionary Controller for Mobile Phone Accidents While Driving” in International Journal of Scientific Research in Science, Engineering and Technology on Dec 2017
R.Pradeep, Assistant Professor from EEE Department has published a Research paper on”Voltage Sensorless Controller for Photovoltaic Integrated Shunt Active Power Filter for Enhancement of Power Quality” in International Journal of Testing and Evaluation on January 2018, doi.org/10.1520/JTE20170019
S.Jayashree, Assistant Professor from EEE Department has published a Research paper on “An Overview of Electrical Energy Storage Technologies in Micro Grid Applications: Performance Perspective” in International Journal of Pure and Applied Mathematics on March 2018
Muthu Vijaya Pandian S, Professor from EEE Department has published a Research paper on “A Novel Approach on Home Security using IoT”, in International Journal for Scientific Research & Development (IJSRD) on 2018
2016-2017M.Poornima, Assistant Professor from EEE Department has published a Research paper on “LVRT Improvement of DFIG Wind Turbine and Fault Mitigation Using PV Supported DVR” in International Journal of Trend in Research and Development (IJTRD), on 2017
J.R.Beny, Assistant Professor from EEE Department has published a Research paper on “Pulsed Flip-Flop with Dual Dynamic Node for Low Power using Embedded Logic” in International Journal of Control Theory and Applications on January 2017
R.Karthick, Associate Professor from EEE Department has published a Research paper on “Grid Integration of Renewable Energy Sources with Power Quality Improvement Features using Multilevel Inverters” in International Journal of Control Theory and Applications on January 2017
R.Karthick, Associate Professor from EEE Department has published a Research paper on “Fuzzy Based Optimized Energy Management Strategy of Renewable Energy Sources for Stand Alone Applications” in Journal of Electrical Engineering on January 2017
R.Rajasekaran, Assistant Professor from EEE Department has published a Research paper on “Pulsed Flip-Flop with Dual Dynamic Node for Low Power using Embedded Logic” in International Journal of Control Theory and Applications on January 2017
Dr. S. Chenthur Pandian, Professor from EEE Department has published a Research paper on“An Efficient Particle Swarm Optimization Technique for 4-Leg Shunt Active Power Filter”, in Circuits and Systems on 2016, DOI: 10.4236/cs.2016.78135
J.R.Beny, Assistant Professor from EEE Department has published a Research paper on “Design and Implementation of Fully Automated Fire Fighting Robot” in International Journal of Scientific Research in Science, Engineering and Technology on 2016
S.Bharath, Assistant Professor from EEE Department has published a Research paper on “Coordinated Control of DFIG System During Unbalanced Grid Voltage Conditions Using Reduced Order Generalized Integrators”, in Pak. J. Biotechnology, on September 2016.
S.Jayashree, Assistant Professor from EEE Department has published a Research paper on “Modelling and Control Design of Three Phase-Four Wire UPQC for Power Quality Improvement”, in Pak. J. Biotechnology on September 2016.
R.Senthilkumar, Associate Professor from EEE Department has published a Research paper on “A Comparative Harmonic Analysis of Single Level and Two Level Matrix Converter with various Load Condition”, in Asian Journal of Research in Social Sciences and Humanities on 2016
C Aiswarya, Assistant Professor from EEE Department has published a Research paper on “Pulsed Flip-Flop with Dual Dynamic Node for Low Power using Embedded Logic” in International Journal of Control Theory and Applications on January 2017
C Aiswarya, Assistant Professor from EEE Department has published a Research paper on “Design and Implementation of Fully Automated Fire Fighting Robot” in International Journal of Scientific Research in Science, Engineering and Technology on 2016
Dr. R. Subramanian, Professor from EEE Department has published a Research paper on“An Enhanced PSO-Based Clustering Energy Optimization Algorithm for Wireless Sensor Network”, in The Scientific World Journal on 2016, https://doi.org/10.1155/2016/8658760
Dr. R. Subramanian, Professor from EEE Department has published a Research paper on “Modeling and Simulation of a Current Controlled Multimodal Neural Network Controller (CCMNN) Based Switched Reluctance Motor”, in Middle-East Journal of Scientific Research on March 2017, DOI: 10.5829/idosi.mejsr.2016.24.03.23051
2015-2016R.Subramanian, Professor from EEE Department has published a Research paper on “A Survey on Energy Conservation in Mobile Sensor Nodes using Cluster-Based Enhanced Routing Protocols for Wireless Sensor Networks”, in International Journal of Applied Engineering Research, 2015
R.Senthil Kumar, Assistant Professor from EEE Department has published a Research paper on “Power Quality Improvement In Distribution System With Induction Motor Load Using Fuzzy Logic Controlled UPQC”, in Advances in Natural and Applied Sciences (ANAS), on March 2016.
R.Senthil Kumar, Assistant Professor from EEE Department has published a Research paper on “Fault Management in Renewable Energy Resource”, in International Journal of Innovative Research in Technology, Science & Engineering (IJIRTSE) on 2016
T.Santhiya, Assistant Professor from EEE Department has published a Research paper on “Modeling of DFIG and Improving the LVRT Capability of System Using Crowbar and Battery Energy Storage System”, in International Journal of Engineering Development and Research on 2015, 212536810
S.Nithya, Assistant Professor from EEE Department has published a Research paper on “Modeling of DFIG and Improving the LVRT Capability of System Using Crowbar and Battery Energy Storage System”, in International Journal of Engineering Development and Research on 2015, 212536810
R.Rajasekaran, Assistant Professor from EEE Department has published a Research paper on “Performance analysis of dual fed induction generator (DFIG) during grid fault and LVRT improvement using STATCOM”, in International journal of Applied Engineering and Research on 2015
R.Karthick, Assistant Professor from EEE Department has published a Research paper on “An intelligent Control and Operation of a Standard Hybrid Renewable Power System with Energy Management Capabilities”, in International journal of Applied Engineering and Research on 2015
R.Vijayakumar, Assistant Professor from EEE Department has published a Research paper on “Maximum Demand Controller using GSM for Industry/Institution”, in International Conference on Recent Researches in Engineering, Science and Technology on 2015
S.Jayashree, Assistant Professor from EEE Department has published a Research paper on “A Unified power management strategy for a grid connected PV hybrid energy storage system”, in International Journal of Research in Electrical Engineering on 2016
J.R.Beny, Assistant Professor from EEE Department has published a Research paper on “Solar and Antenna Powered Stand-Alone Structs” in International Journal of Advanced Research Methodology in Engineering & Technology on 2016
C.Aiswarya, Assistant Professor from EEE Department has published a Research paper on “Solar and Antenna Powered Stand-Alone Structs” in International Journal of Advanced Research Methodology in Engineering & Technology on 2016
R.Karthick, Assistant Professor from EEE Department has published a Research paper on “Simulation of Energy Management System and Power Control of a Hybrid Power System Based on Renewable Energy Sources”, in Advances in natural and applied sciences on 25 March 2016.
R.Rajasekaran, Assistant Professor from EEE Department has published a Research paper on “Application Of Superconductors In Mitigation Of Grid Connectivity Issues For Dfig Based Wind Energy Generation Systems”, in Advances in natural and applied sciences on 25 March 2016
R.Vijayakumar, Assistant Professor from EEE Department has published a Research paper on “Compensation of Voltage SAG and SWELL Using SMES with Fuel Cell Based DVR in Transmission Systems, in International Journal of Research in Electrical Engineering on 2015
R.Vijayakumar, Assistant Professor from EEE Department has published a Research paper on,“ DVR Based Power Quality Improvement using DFIG, Fuel Cell and Super capacitor”, in International Journal of Research in Electrical Engineering on 2015
R.Gururprasath, Assistant Professor from EEE Department has published a Research paper on “Short Term Generation Scheduling of Thermal Units with emission limitation in Deregulation Environment” in International Research Journal of Engineering and Technology on 2015
J.R. Beny, Assistant Professor from EEE Department has published a Research paper on, “Design and Implementation of Hexapod Robot for Security Purpose in Defence and Forest Sectors”, in Journal of applied sciences research, on 2015
J.R. Beny, Assistant Professor from EEE Department has published a Research paper on, “Novel Architecture for Data – Shuffling Using Fisher Yates Shuffle Algorithm”, in International Journal of Scientific research in Science, Engineering and technology (IJSRSE) on 2015
C.Aiswarya, Assistant Professor from EEE Department has published a Research paper on, “Novel Architecture for Data – Shuffling Using Fisher Yates Shuffle Algorithm”, in International Journal of Scientific research in Science, Engineering and technology (IJSRSE) on 2015
J.R.Beny,Assistant Professor from EEE Department has published a Research paper on “A Stochastic Model of Performance Analysis for MIMO – OFDM System” in International Journal of Innovative Ideas in Research (IJIIR), on 2015
M.Poornima, Assistant Professor from EEE Department has published a Research paper on,“ DVR Based Power Quality Improvement using DFIG, Fuel Cell and Super capacitor”, in International Journal of Research in Electrical Engineering on 2015
C.Aiswarya,Assistant Professor from EEE Department has published a Research paper on “A Stochastic Model of Performance Analysis for MIMO – OFDM System” in International Journal of Innovative Ideas in Research (IJIIR), on 2015
C.Aiswarya, Assistant Professor from EEE Department has published a Research paper on, “Design and Implementation of Hexapod Robot for Security Purpose in Defence and Forest Sectors”, in Journal of applied sciences research, on 2015
R. Rajasekaran, Assistant Professor from EEE Department has published a Research paper on “Fault Ride-Through Capability Enhancement of DFIG-Based Wind Turbine With a Flux-Coupling-Type SFCL Employed at Different Locations”, in International Journal of Innovative Research in Technology, Science & Engineering (IJIRTSE) on 2016
R. Rajasekaran, Assistant Professor from EEE Department has published a Research paper on “Fault Analysis of DFIG based Wind Energy Conversion System”, in International Journal of Innovative Research in Technology, Science & Engineering (IJIRTSE,) on 2016
C.Ramakrishnan, Assistant Professor from EEE Department has published a Research paper on “Low frequency ripple free MPPT Based Converter for Grid Tied PV System” in International journal of Research in Electrical Engineering on 2016.
C.Ramakrishnan, Assistant Professor from EEE Department has published a Research paper on “Digital Control for Power Flow Management in a PV system Supplying DC loads” in International journal of Research in Electrical Engineering on 2016
C.Ramakrishnan, Assistant Professor from EEE Department has published a Research paper on “Minimizing THD in a Non-Linear System by Hybrid Series Active Power Filter Using Cascaded Seven Level Inverter” in International Journal of Applied Engineering Research on 2015
G.Abirami, Assistant Professor from EEE Department has published a Research paper on “High gain voltage DC-DC converter based on three state switching cell for battery charging using PV system”in International journal of research in Electrical Engineering on 2016.
G.Abirami, Assistant Professor from EEE Department has published a Research paper on “High step up DC-DC Converter for fuel cell power under APS Control” in International Journal of Research in Electrical Engineering on 2016
S.Jayashree, Assistant Professor from EEE Department has published a Research paper on “A Unified power flow management strategy for a grid connected PV energy storage system” in International Journal of Research in Electrical Engineering on 2016
R. Pradeep , Assistant Professor from EEE Department has published a Research paper on, “Wind farm conduced primary load frequency control for multi area power system with etherizing load frequency” in International Journal of Innovative Research in Technology, Science & Engineering (IJIRTSE) on 2016
R. Pradeep , Assistant Professor from EEE Department has published a Research paper on, “Vehicle speed monitoring system for safe riding and minimizing accident in prone zone” in International Journal of Innovative Research in Technology, Science & Engineering (IJIRTSE) on 2016.
YearPaper details
2015-2016Mr.S.Prince Samuel, Mr.N.KamalaMoorthy, “Smart Shopping Cart”in the International Journal of Recent and Innovation Trends in Computing and Communication”, Volume 3,Issue:10,October 2015.
Mr.S.Prince Samuel,Ms.R.Kiruba,Ms.M.Saranya “Development of Test Rig for Automated Driving Test Track and Issuing Liscense using LabVIEW” in the International Journal of Recent and Innovation Trends in Computing and Communication , Volume 3,Issue :12,December 2015.
Mr.N.KamalaMoorthy,Mr.S.Prince Samuel,Ms.R.Kiruba “Decomposition of Dynamic Texture Using Diamond Search Algorithm” International Journal of Scientific and Technical AdvancementsVolume 2, Issue :1, January 2016.
Mr.N.KamalaMoorthy, “Augmentation of Biodiesel from Castroreum by virtue of  Bioreactor” in the International Journal of Modern Trends in Engineering & Science,Vol.3,Issue :7,April 2016.
2016-2017M. Dhipa, “Prevention of Manet from Co-Operative Black Hole Attacks”in International Journal of Engineering and Computer Science, ISSN:2319-7242,Vol 5 Issue 8 Pg No 01-07,August 2016.
N.Kamalamoorthy, “Detection of Fasciculations in Healthy and Diseased Muscle using Ultrasonic” in Journal of Medical and Health Research, ISSN:adcd:000,September 2016
Ms.M.Brindha, “Study of Face Authentication using Euclidean and Mahalanobis Distance classification Method” in International Journal of Modern trends in Engineering and Science, Volume 04, Issue 02, 2017, ISSN no:  2348-3121, Page no: 30-34,January 2017.
Ms.M.Brindha, “A Survey on “Wireless Multimedia”in International Journal of Modern trends in Engineering and Science, Volume 04, Issue 02, 2017, ISSN no:  2348-3121,Page no: 35-40,Jan 2017.
Mrs.M.Dhipa, “Hybrid Particle Swarm Optimization based Vertical Handoff decision Algorithm for Multicriteria Metrics for Radio Heterogenous Network” in Asian Journal of Research in Social Sciences and Humanities,ISSN:2319-7242,Vol.5,Issue 8,PP no.01-07,August 2016.
2017-2018Dr.S.Poornachandra, “Chaos Based Image Encryption Using Bogdanov Map” in International Journal of Computational and Theoretical Nanoscience, Vol.14,No.5,PP-1-7,July 2017.
Dr.S.Poornachandra, “Association of diabetic retinopathy with systemic organ diseases :a review(cardiovascular and cerebrovascular diseases)”, International Journal of Biomedical Engineering & Technology, Vol.24, No.4, PP-377-392, July 2017.
Mr.K.Sambasiva Rao , “IoT Based Intelligent Sanitary Napkin Disposer”, Advances in Applied and Natural Science, ISSN: 1995-0772 EISSN: 1998-1090 ANAS Vol. 11, No.10,PP-32-40,August 2017.
Ms.M.Brindha, Ms.V.Poorani, “Optimal Jamming Attack Detection in WSN”, International Journal of Innovative Research & Studies, ISSN NO:2319-9725,Vol.7,Issue No. 11,PP-12-20,November 2017.
. Dr.S.Poornachandra ,Ms.M.Brindha,  “Smart Shopping Trolley”, International Journal for Research in Applied Science & Engineering Technology, ISSN NO:2321-9653,Vol.6,Issue 2,PP-1651-1656, February 2018.
Mr.S.Prince Samuel, “RFID Based Smart Car Parking System Using IoT”, International Journal on Recent and Innovation Trends in Computing and Communication, ISSN NO. 2321-8169, Vol. 6 Issue 2,PP-27-31, February 2018.
Ms.V.Poorani, “A Position Sensorless Control of Brushless DC Motor for Variable Speed Application”,International Journal of Signal Processing and Wireless Networks,ISSN:2320-2882,Vol.6.,Issue 1,PP-41-44,March2018.
Mr.K.Sambasivarao, “IoT Based Wate Segregation System with Thingspeak Control”, International Journal for Research in Applied Science & Engineering Technology, ISSN:2321-9653,Vol.6,Issue 3,PP-2241-2244, March2018.
.Mr.P.Arun Kumar, “Design and Fabrication of a Pneumatically Operated Wheelchair Ambulated Stretcher”, International Journal for Research in Applied Science & Engineering Technology, ISSN:2321-9653,Vol.6,Issue 2,PP-1657-1660,February 2018.
.Mr. K.Sambasivarao, “Paper Defect Detection with Automatic Rejection Option Using Camera & Raspberry Pi.”, IOSR Journal of Engineering, ISSN:2250-3021,Vol.8,Issue 1,PP-70-73, Janurary 2018.
Mr. K.Sambasivarao, “Solar Powered IoT Based Intelligent Sanitary Napkin Disposer”, International Journal for Research in Applied Science & Engineering Technology, ISSN:2321-9653,Vol.6,Issue 3,PP-2016-2021,March 2018.
Ms.Shangkavi,“A Innovative Method of Automatic Medication Reminder for Old Age People”,International Journal of Creative Research Thoughts, ISSN:2320-2882,Vol.6,Issue 1,PP-543-545-542,March 2018.
Ms.Kiruba R, “A Innovative Approach in the Fieldof Process Control Through Cloud Computation”, International Journal of Creative Research Thoughts, ISSN:2320-2882,Vol.6,Issue 1,PP-543-532-535,February 2018.
2018-2019Ms.Kavitha, “An Advanced Power Theft Identifier using LabVIEW”, International Journal of Management,Engineering and Technology, ISSN NO:2249-7455,Vol.8, Issue 3,PP-1153-1159,October 2018.
Mr.S.Prince Samuel, “Low Cost Pulseoximeter”, International Journal of Research and Analytical Reviews, ISSN NO:2349-5138,Vol.6, Issue 1,PP-374-378,Feb 2019.
Ms.K.Ranjani, “Smart Agriculture using IoT”, Journal of Emerging Technologies and Innovative Research, ISSN NO:2349-5162,Vol.6,Issue 4,April 2019.
2019-2020Mr.S.Prince Samuel,”Machine Learning and Internet of Things based Smart Agriculture”, IEEE Xplore, ISSN: 2575-7288 , April 2020
YearPaper Details
2018-2019 R.Vanitha & Mr.R.S.Suresh “The Inner world of Indian Middle Class Educated Woman: A Study of Shashi Deshpande’s That Long Silence”, Vol.6.Issue 4.2018,(ISSN: 2395-2636), Oct-Dec 2018.
2018-2019R.N.Saraswathi “The concepts of Buddhism and the Four Noble Truths”  Online International Interdisciplinary
Research Journal , ISSN 2249-9598 , Volume -08/ Sept 2018
2018-2019S.Shalini&R.N.Saraswathi”Emotional Conversion From Alienation To Obsession A Contextual Study of Stephenie MeyersTwilight”,INTERNATIONAL JOURNAL OF ENGLISH LANGUAGE , LITERATURE IN HUMANITIES(IJELLH),Volume-6,Issue-11,Nov 2018
ISSN-2321-7065
2019-2020Dr.S.Parvathi “Interview with Dr.Sudha Murty”, International Journal of Emerging Technologies and Innovative Research, ISSN:2349-5162, Vol.6, Issue 1, page no.704-705, January-2019
2020-2021Dr.S.Parvathi “A Critical Study of Women Characters in Sudha Murty’s ‘the mother i never knew’”, International Journal of Emerging Technologies and Innovative Research , ISSN:2349-5162, Vol.7, Issue 4, page no.2076-2079, April 2020
2020-2021S.Shalini&R.N.Saraswathi“Issue of Afghan women in Khaled Hosseinis the Thousand splendid  suns, International journal of English Research-ISSN No: 2455-2186,Issue 02,Volume 06,pp 39-40,April 2020. (UGC)
2020-2021A.Samundeswari”Trauma of Women and Children in Bapsi Sidhwa’s Cracking India”,         International journal of English Research, ISSN: 2455-2186,Volume 6,Issue 3,Pg No17-19, Certificate No 6-3-16,June 2020
YearPaper details
2016-2017Dr.J.Shanthini,”Automatic brain stroke segmentation using Probabilistic Patch Based Approach and Convolution Neural Network”, International Journal of Computational and Theoritical Nano science, https://doi.org/10.1166/jctn.2017.6980, Scopus and Google Scholar, Nov 2017
2017-2018M.Udayamoorthi, “Consistent and Energy Competent Routing Protocol for Mobile Adhoc Networks”, ARPN Journal of Engineering and Applied Sciences Vol. 12,No. 21,ISSN 1819-6608, Scopus and Google Scholar, November 2017
2019-2020Dr.J.Shanthini, “Mouse Pattern Based Analysis of customer Behaviour (CBA-MMP) Using Cloud Data Analytics, Wireless personal Communication” , Springer , DOI 10.1007/s11277-020-07055-1(SCI-E, Scopus and Google Scholar, January 2020
2019-2020Dr.J.Shanthini, “ECM-CSD: An efficient classification model for cancer stage diagnosis in CT lung images using FCM and SVM techniques”, Journal of Medical Systems, Vol.43. No.3.,(SCI-E, Scopus and Google Scholar), 2019
2019-2020Dr.M.Udhayamoorthi, “Smart Parking for Smart Cities”, International Journal of Research and Analytical Reviews, ISSN 2349-5138 Volume 7 Issue 1, February 2020 (UGC Approved Journal)
2019-2020Dr.M.Udhayamoorthi, “A New Method for Pixel password:Preventing Flase Detection in Networking”, International Journal of Research and Analytical Reviews, ISSN 2349-5138 Volume 7 Issue 1, February 2020 (UGC Approved Journal)
2019-2020T.Shanmugapriya, “Deep Multiple instance Learning for Automatic Detection of Diabetic Retionapathy in Retinal Images”, International Journal of Emerging Technology and Innovative Engineering, ISSN 2394-6598 Volume 6 Issue 2, February 2020 (UGC Approved Journal)
2019-2020M.Nandhini, “Smart Trash Can”, International Research Journal of Engineering and Technology, Volume 07 Issue 02, February 2020 (UGC Approved Journal)
YearPaper details
2018-2019S.Sathya,I.Rajeswari,P.Senthilkumar,A.Viswanathan “Solution of partial integro differential equations by using Mohand and Double Mohand Transform Methods”, Journal of Emerging Technologies and Innovative  Research, vol. 5, Issue 11,(ISSN -2349-5162), Nov 2018.
C.Saranya,M.G.Gnanavel,P.Senthilkumar,A.Viswanathan “Solution of Tarig Transform for Solving Linear Volterra Integro Differential Equation of second kind”, Journal of Research and Analytical Reviews, vol. 5, Issue 4,(ISSN -2348-1269,2349-5138), Dec 2018..
M.G.Gnanavel,C.Saranya,A.Viswanathan ” A New  application  of Tarig Transform for Solving Linear Volterra Integral Differential Equations”, Journal of Applied Science and Computations, vol. 5, Issue 11,(ISSN -1076-5131), Nov 2018.
P.Senthilkumar,P.Gomathi ,S.Gowri,A.Viswanathan  “Applications of Mohand Transform to Mechanics and Electrical Circuit Problems”,  International Journal of Research    in Advent Technology, vol. 6, No.10 ,(ISSN -2321-9637), Oct  2018.
  P.Senthilkumar,C.Saranya,M.G.Gnanavel,A.Viswanathan “Applications of Mohand Transform for solving linear Volterra Integral Equations of first kind”,  International Journal of  Research in Advent Technology, vol. 6, No.10 ,(ISSN -2321- 9637), Oct 2018.
 P.Senthilkumar,V.Sandhya,S.Sindhuja,A.Viswanathan “Applications of Mohand Transform in Cryptography”, International Journal of Advanced and Innovative Research ,  vol. 7, Issue 9 ,(2278-7844), Oct 2018.
 P.Senthilkumar,S.Sathya,I.Rajeswari,A.Viswanathan “Applications of Mohand Transform for solving Partial Equations “,  International Journal for Research in Engineering application & Management, vol. 4, Issue 07 ,(ISSN -2454-9150), Oct 2018.
P.Senthilkumar,M.G.Gnanavel,A.Viswanathan “Applications of Mohand Transform for solving linear Volterra Integro differential Equations “,  International Journal of Research in Advent Technology, vol. 6, No.10 ,(ISSN -2321-9637), Oct 2018.
P.Senthilkumar , A.Viswanathan ” An Applications of MAHGOUB Transform to Mechanics, Electrical circuit problems”,   International journal of Science and research , vol. 07 ,Issue 7 ,(ISSN -2319-7064), July 2018
 G.Nandini,S.Gowri ” On r-dynamic coloring of the edge corona of path and wheel graphs”,   Mathematical Sciences International research journal  , vol. 07 ,Issue 2 ,(ISSN -2278-8697), Sep 2018.
G.Nandini,M.Venkatachalam,S.Gowri ” On r-dynamic coloring of the family of bistar graphs”,   Communication faculty of sciences university of Ankara series  , vol. 68 ,No 1 ,(ISSN -1303-5991), Sep 2018.
R.Sumathi, KE.Sathappan  ” Anti L-Fuzzy Bi-Ideal of a ring”,    Mathematical Sciences International research journal  , vol. 07 ,Issue 2 ,(ISSN -2278-8697), Sep 2018
P.Senthilkumar,S.Vasuki “Applications of Aboodh Transform to Mechanics Electrical circuit problems”,   International Journal for Research in Engineering application & Management , vol. 04, Issue 06 ,(ISSN -2454-9150), Sep 2018.
P.Senthilkumar,S.Vasuki “Applications of kamal Transform in cryptography”,   International Journal of Interdisciplinary Research and Innovations , vol. 06, Issue 3 ,(ISSN -2348-1226), Sep 2018.
P.Senthilkumar,S.Vasuki ” An Applications of MAHGOUB Transform in cryptography”,   Advances in Theoretical and Applied mathematics , vol. 13,pp 91-99 ,(ISSN -0973-4554), Sep 2018.
2019-2020M.G.Gnanavel,C.Saranya”Application of Linear Volterra Integral Equations of first kind by Using Tarig Transform”International Journal of Innovative Technology and Exploring Engineering Vol-8 Issue -10,(ISSN:2278-3075),August 2019
R.Sumathi”Regularity Concept of L Fuzzy Bi Ideals In Near Ring” ,Pramana Research Journal,Vol-9,Issue -6,(ISSN:2278-3075),June 2019
YearPaper details
2016-2017K. Arun Kumar and S. Nivedha, “Analysis and Measurement of Electricity Reading by Using GSM Modem”, International Journal on Engineering Technology and sciences (IJETS), Volume 3, Issue 03, pp 73-77, ISSN(P): 2349-3968, ISSN (O): 2349-3976 March – 2016.
2020-21Prabakaran.V, “An empirical study to assess the market potential for personalized online
cloth shop for women”, International Journal of Scientific Research in Engineering and Management, Vol. 4, Issue 4, ISSN: 2582 3930, pp: 1-5, August 2020.
2020-21Ms.S.Swarnam, “Survey -An Impact of Macroeconomic Variables on Functioning of Indian Stock Exchange” in the Doro Rangsang research Journal, ISSN:2347-7180, Vol 10, Issue 7, pp: 25-34, 2020.
2020-21Prabakaran, Krishnaveni.P and Shamini.S.D, “The Influence of Artificial Intelligence on Recruitment: A Conecptual Study”, International Journal of Advanced Science and Technology, ISSN: 2005-4238, Vol. 29, Issue 3, pp: 11527 – 11535, 2020.
2020-21Shamini.S.D, Dr.P.Krishnaveni and Dr.V.Prabakaran, “A Study on Impact of Covid-19 in different Industry Verticals: an Employer Perspective”, International Journal of Scientific Research in Engineering and Management, ISSN: 2582-3930, Vol. 4, Issue 7, pp: 1-3, 2020.
2020-21S.Senthil Kumar, “A Study on Tea Plantation Worker’s Health, Safety and Welfare Measures of Tea Estates with Reference to Nilgiris District, Tamilnadu”, International Journal of Advanced Science and Technology, ISSN: 2005-4238, Vol. 29, Issue 5, pp: 2160-2168, 2020.
2019-20Ms.R.Banu rekha, published a research paper titled “Work life Balance of Female Nurses” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 111-118.
2019-20Ms.R.Banu rekha, published a research paper titled “A Study on Work life Balance among Women Teachning Staff at various Colleges” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 116-177
2019-20Ms.R.Banu rekha, published a research paper titled “Work-life Balance among Women Enterpreneurs” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 232-239
2019-20Ms.R.Banu rekha, published a research paper titled “Work Life Balance on Women Teacher” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 202-215
2019-20Ms.R.Banu rekha, published a research paper titled “Work Life Balance of Police in India” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 246-253
2019-20Ms.R.Banu rekha, published a research paper titled “Work Life Balance for Women in Various Sectors” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 263-272
2019-20Ms.R.Banu rekha, published a research paper titled “Work Life Balance of Female Teachers” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 292-299
2019-20Ms.R.Banu rekha, published a research paper titled “Work Life Balance of Policies and Impact Employee’s Job Satisfaction and Performance” in the International Journal of Scientific Research in Engineering and Management, Vol 2, Issue 04, pp: 182-189. eISSN: 2582 3930
2019-20Ms.K.Monisha, published a research paper titled “Work Life Balance of Men in India” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 223-231
2019-20Ms.K.Monisha, published a research paper titled “Work Life Balance of Women in India” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 28-37
2019-20Ms.K.Monisha, published a research paper titled “Work Life Balance of Google” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 185-193
2019-20Ms.K.Monisha, published a research paper titled “Women Construction Industry: A Work Life Balance Perspective” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 178-184
2019-20Ms.K.Monisha, published a research paper titled “Work Life Balance of IT and its Industries of India” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 152-165
2019-20Ms.K.Monisha, published a research paper titled “Work Life Balance on Women in Banking Sector” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 119-129
2019-20Ms.K.Monisha, published a research paper titled “Work Life Balance for Police Department” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 144-151
2019-20Ms.K.Monisha, published a research paper titled “Work Life Balance of Nurses in India” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 216-222
2019-20Ms.K.Monisha, published a research paper titled “Work Life Balance of Employees in Information Technology (IT) Sector at Chennai” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 93-99
2019-20Ms.K.Monisha, published a research paper titled “Work Life Balance of Women Working in Education Sector” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 100-110
2018-19P.Krishnaveni, S,Swarnam and V.Prabakaran, “An Empirical Study to Analyse Overbought and Oversold Periods of Shares Listed in CNX Bankex”, in the International Journal of Management, IT & Engineering, Vol 9, Issue 3, ISSN (O): 2249 0558, March 2019.
2018-19K.Mohan Kumar, “Measuring Customer Based Brand Equity: Evidence From Hero Motocorp Two Wheelers in TamilNadu”, in the International Journal of Management, IT & Engineering, Vol 9, Issue 1, ISSN (O): 2249 0558, January 2019.
2018-19Dr.V.Prabakaran,  Dr.P.Krishnaveni and S.D.Shamini, “Signalling Effect: Evidence from Dividend Announcements in National Stock Exchange”, in the International Journal of Management, IT & Engineering, Vol 9, Issue 1, ISSN (O): 2249 0558, January 2019.
2018-19Dr.V.Prabakaran,  Dr.P.Krishnaveni and Mr.E.Mohanraj, “Signalling Effect: Evidence from Dividend Announcements in Bombay Stock Exchange”, in the ZENITH International Journal of Multidisciplinary Research, Vol 9, Issue 1, ISSN (O): 2231 5780, January 2019.
2018-19V.Prabakaran, “Engineering Education in India: A case study”, in the International Journal of Marketing, Financial Services & Management Research, Vol 7, Issue 7, ISSN (O): 2277-3622, July 2018
2018-19V.Prabakaran, “Studnets’ perception and Attitude towards Selection of Colleges in Tamilnadu”, in the International Journal of Marketing, Financial Services & Management Research, Vol 7, Issue 6, ISSN (O): 2277-3622, June 2018
2016-17K. Mohan Kumar, S. Viniba, “A Study on Customers’ Perception and Expectation on Core Service Quality in Commercial Banks”, “Asian Journal of Research in Social Sciences and Humanities” (Annexure-I), ISSN: 2249-7315, Vol.6, No. 10, 2016.
2016-17S. Viniba, “A study on work stress coping strategies adopted by software professionals with special reference to Tamilnadu”, “Asian Journal of Research in Social Sciences and Humanities” (Annexure-I), ISSN: 2249-7315, Vol.6, No. 10, 2016.
2016-17P. Krishnaveni, V. Prabakaran, K. Mohan Kumar, “UK’s Referendum: Signaling Effect”, “Asian Journal of Research in Social Sciences and Humanities” (Annexure-I), ISSN: 2249-7315, Vol.6, No. 10, 2016.
2016-17V. Prabakaran, P. Krishnaveni, “DOW Theory in Assessing Equity Share Price Movement”, “Asian Journal of Research in Social Sciences and Humanities” (Annexure-I), ISSN: 2249-7315, Vol.6, No. 10, 2016.
2016-17V. Prabakaran, “Issues & challenges faced by Management Institutions in this contemporary situation of Indian economy”, “International Journal of Research in Advanced Technology”, Volume 1, Issue 7, pp. 1-5, 2016.
2016-17M.G. Saravanaraj, “A study on the impact of Spirituality on Organizational Performance with Special Reference to Organizations in Salem City”, “International Journal of Research in Commerce, IT & Management”, Vol .2,  Issue 8, 2016.
2016-17V. Prabakaran, “Market reactions to Dividend Declaration on Equity Share Price and Volume with Particular reference to Bombay Stock Exchange, India”, “Asian Journal of Research in Social Sciences and Humanities” (Annexure-I), ISSN: 2249-7315, Volume 6, Issue 7, pp. 1706 – 1717, 2016.
2016-17M.G. Saravanaraj, ‘Electronic Payment System Landscape in India- A Road Ahead’, Asian Journal of Research in Social Sciences and Humanities (Annexure-I), ISSN: 2249-7315, Vol.6, No.6, pp. 333-361, 2016.
2016-17P. Krishnaveni, “Role of Indicators and Time Frame in Determining the Risk Adjusted Returns from Trading Currency Pairs”, “International Journal of Research in Advanced Technology”, Vol. 1, Issue 5, 2016.
2016-17M.G. Saravanaraj, “A study on the levels of organisational commitment of the teaching staff with special reference to self-financing engineering colleges in Coimbatore district”, “International journal of business and Management”, ISSN: 2321-8916, Vol .4,  Issue 4 , 2016.
2016-17M.G. Saravanaraj, “Behavioural Influences in Investor Decisions – An Indian Perspective”, “International Journal of Advanced Research in Management Architecture Technology & Engineering”, ISSN: 2454 9762, Vol.2, Issue 3, 2016.
2015-16V. Prabakaran, “Impact of Corporate Event Announcements on Trends on Equities: Evidence from NSE Sectoral Indices”, “Asian Journal of Research in Social Sciences and Humanities” (Annexure-I), ISSN: 2249-7315, Volume 6, Issue 6, pp. 2077-2090, 2016.
2015-16P. Krishnaveni, “Impact of Time Frame and Technical Indicators on Strength of Currency Pairs”, “Asian Journal of Research in Social Sciences and Humanities” (Annexure-I), ISSN: 2249-7315, Volume 6, Issue 6, pp. 1717-1735, 2016.
2015-16M.G. Saravanaraj, “Relative Importance of Concerns, Norms and Social Status among Bangaloreans in choosing Green Products”, “Asian Journal of Research in Social Sciences and Humanities” (Annexure-I), ISSN: 2249-7315, Vol.6, No.5, pp.1202-1217, 2016.
2015-16M.G.Saravanaraj, “A study on the impact of job involvement on work conditions organisational commitment and interpersonal relationship among self-financing engineering college teaching staff in the western region of Tamilnadu”,  “International Journal of Innovative Research and Development”, ISSN: 2282-0211,  Vol.5, Issue 5, 2016.
2015-16S. Viniba, “Factors Contributing to Work Stress of the Software Professionals”, “Advanced Research in Management and Social Sciences”, ISSN: 2278-6236, Vol.5, Issue 2, 2016.
2015-16P. Krishnaveni “An Empirical Evaluation of Foreign Exchange Market Efficiency: GBPUSD Currency Pair”, “GE-International Journal of Management”, ISSN: 2321-1709, Vol. 5, Issue 2, 2016.
2015-16V. Prabakaran, “Role of Foreign Direct Investment in Indian Economy”, “EPRA International Journal of Economic and Business Review” – Online, ISSN: 2347-9671, Vol. 3, Issue 9, 2015.
2015-16V. Prabakaran , “Investors’ risk profile analysis and their perception towards investing in stock market”, “Zenith International Journal of Business Economics and Management Research”, ISSN: 2249-8834, Vol. 5, Issue 8, 2015.
2015-16M.G. Saravanaraj, “A Study on Factors Influencing Buying Behaviour in Indian Stock Markets”, “SNS Journal of Marketing”, ISSN: 0975-7627, Vol.7, Issue 2, 2015.
2015-16V.Prabakaran, “Level of Stress among Engineering and Management students in Coimbatore City”, in the International Journal of Exclusive Global Research, ISSN: 2456-2076,Vol 1, Issue 3, 2016.
YearPaper details
2019-2020R Ranjith, B Karthick, M Sindhu Kavi, C Somu, T Pravin, “Impact of various reinforcement particles on the density of AA7050 graded aluminium fabricated through stir casting”, Material Today proceedings, 2020.
2019-2020R.Ranjith, P. Vivekanandan, A. Vishnu, “Sulphide stress corrosion cracking of AA7050 hybrid composites”, Journal of the indian chemical society, 2020.
2019-2020R. Yasodharan, A. Senthil kumar, P. Mohan kumar, J. Ajayan Investigation and influence of layer composition of tandem perovskite solar cells for application in future renewable and sustainable energy,2020.
2019-2020Manikandan R, Kalaiselvi.P, Gangatharan.S, Sinduja.R and Chandru.T “Ultrasonic liquid level detector using Microcontroller”, International research journal on advanced science hub, Vol.2, issue 4, 2020
2019-2020P.Vivekanandan, A.Vishnu, Sathees Kumar Narayanasamy, R.Yasodharan, “Modelling, simulation and control of 5 axis industrial robot using MATLAB”, Indian journal of science and technology, pp.1-7, Vol.12, 2019.
2019-2020R.Ranjith, C.Somu, G.Tharanitharan, T.Venkatajalapathi, M.Naveenkumar, “Integrated Taguchi cum Grey Relational experimental analysis (GREAT) for optimization and machining characterization of cryogenic cooled AA6063 aluminium alloy”, Materials today: Proceedings, pp. 3597-3605, Vol.18, 2019.
2019-2020R. Ranjith, P. Tamilselvam, T. Prakash, C. Chinnasamy, “Examinations concerning the electric discharge machining of AZ91/5B4CP composites utilizing distinctive electrode materials, Materials & Manufacturing process, pp. 1120-1128, Vol.34, 2019.
2019-2020Ranjith R, Karthick B, Kavi MS, Somu C, Pravin T. Impact of various reinforcement particles on the density of AA7050 graded aluminium fabricated through stir casting. Materials Today: Proceedings. 2020 Mar 19.
2019-2020R. Yasodharan, A. Senthil kumar, P. Mohan kumar, J. Ajayan Investigation and influence of layer composition of tandem perovskite solar cells for application in future renewable and sustainable energy.
2019-2020P. Mohan kumar. P. Ajayan, R. Yasodharan, P. Devendran, R. Sambasivam, A review of micromachined sensors for automotive applications.
2018-2019J Ajayan, T Ravichandran, P Mohankumar, P Prajoon and JC Pravin, “Investigation of DC-RF and breakdown behaviour in Lg= 20 nm novel asymmetric GaAs MHEMTs for future submillimetre wave applications”, AEU-International Journal of Electronics and Communications, ISSN: 1434-8411, Vol. 84, pp.387-393, 2018.
2018-2019J Ajayan, T Ravichandran, P Mohankumar, P Prajoon, JC Pravin and D.Nirmal, “Investigation of RF and DC Performance of E-Mode In0.80Ga0.20As/InAs/In0.80Ga0.20as Channel based DG-HEMTs for Future Submillimetre Wave and THz Applications”, IETE Journal of Research, ISSN 0377-2063, Vol. 64,pp 1-11, 2018.
2018-2019J Ajayan, D Nirmal, T Ravichandran, P Mohankumar, P Prajoon, L Arivazhagan and Chandan Kumar Sarkar, “InP high electron mobility transistors for submillimetre wave and terahertz frequency applications: A review”, AEU-International Journal of Electronics and Communications, , ISSN: 1434-8411, Vol. 94, pp.199-214, 2018.
2018-2019P Mohankumar, J Ajayan, R Yasodharan, P Devendran and R Sambasivam, “A Review of Micromachined Sensors for Automotive Applications”, Measurement, ISSN: 0263-2241, Vol. 140, pp. 305-322, 2019.
2018-2019M.Anand, R.Manimaran, M.Praveen Kumar and S.Surjith Bharathi, “Domestic Oil Extraction Machine”, International Journal of Research, ISSN NO:2236-6124, Vol. VIII, Issue V, pp.1785-1790, 2019.
2018-2019P.Devendran, A.Anthony Mugilan, S.Kingsly Sam Raj, S.Kiran Kishore and R.Prasanth, “Poultry 4.0”, International Journal of Research, ISSN NO:2236-6124, Vol. VIII, Issue V, pp.1791-1795, 2019.
2018-2019P.Devendran, A.Amsath kumar , E.Balamurugan , P.Muhileshwaran and R.Sathiyan, “Automated Irrigation System Using GSM Module”, International Journal of Research, ISSN NO:2236-6124, Vol. VIII, Issue V, pp.1796-1801, 2019.
2018-2019P.Devendran, R.K Harirajan, R. Karthik Kumar, B. Sunil and R. Karthick, “PLC Based Valve Leakage Testing Machine”, International Journal of Research, ISSN NO:2236-6124, Vol. VIII, Issue V, pp.1802-1808, 2019.
2018-2019P.Mohankumar, V.Mahendran, S.Ragul, S.Ratish and S.Sasi Kumar, “Computer Vision: Realtime brinjal leaf diseases detection using opencv and raspberry PI”, International Journal of Research, ISSN NO:2236-6124, Vol. VIII, Issue V, pp.1809-1815, 2019.
2018-2019S.Pradeep, S.P.Hari shankar, V.Karthik, M.Nandha Kumar and T.Rajeshwaran, “Basic Design of an Anthrophomorphic Robotic Arm” International Journal of Research, ISSN NO:2236-6124, Vol. VIII, Issue V, pp.1819-1829, 2019.
2018-2019R. Sambasivam, C. Ranjith, T. Jerome and V. Ajith Kumar, “Design and Fabrication of Automated Wheel Chair”, International Research Journal of Engineering and Technology, ISSN NO:2395-0056, Vol. 6, Issue 4, 2019.
2018-2019R Yasodharan, AP Senthilkumar, J Ajayan, P Mohankumar, “Effects of layer thickness on Power Conversion Efficiency in Perovskite solar cell: A numerical simulation approach”, 2019 5th International Conference on Advanced Computing & Communication Systems, IEEE, pp.1132-1135, 2019.
2017-2018P.Vivekanandan, A.Vishnu, S.Pradeep, R.Sambasivam , “Design and Analysis of Quad Bike Chassis”, Taga Journal, ISSN NO: 1748-0345(online), Vol. 14, pp.2317-2322, 2018.
2017-2018P.Vivekanandan, M.Anand, S.Pradeep, R.Sambasivam, “ Design and Modelling of Go-KART Vehicle”, Taga Journal, ISSN NO: 1748-0345(online), Vol. 14, pp.2323-2333, 2018.
2017-2018P.Kalaiselvi, M.Anand, A.Vijaykrishnaraj, D.NaveenBharath, “Robust Stabilization of Dynamical System”, International Journal Of Advancement In Engineering Technology, Management and Applied Science (IJAETMAS) ISSN: 2349-3224, Vol. 4, Issue 8, pp. 49-57, 2017.
2017-2018P.Vivekanandan, Prachi Singh, B.Vinothini, V.Padmaja, E.Dharanitharan,,”Electricity Generation from Bio-Waste”, International Journal of Modern Trends in Engineering and Science, ISSN: 2348-3121, Vol. 4, Issue 5, pp. 96-99, 2017.
2017-2018P.Mohankumar G.P.Vijaya Krishna, “Automated car parking brake system”, International journal of modern trends in engineering and science, ISSN 2348-3121, Vol. 4, Issue 2, pp.23-26, 2017.
2017-2018P.Vivekanandan, I.Kingsley Rufus, M.Maruthupandi, B.Sabarinath, S.Jayasurya, “Safety Enhance System for Seatbelt”, International Journal of Scientific Research and Review, ISSN NO: 2279-543X, Volume 7 Issue 3, pp.220-226, 2018.
2017-2018P.Vivekanandan, I.Kingsley Rufus, M.Maruthupandi, B.Sabarinath, S.Jayasurya,“Automatic Seatbelt Release System”, IAETSD Journal for Advanced Research in Applied Sciences, ISSN NO: 2394-8442, Vol. 5, Issue 2, pp.544-552, 2018.
2017-2018P.Vivekanandan, S.Kesavan, “A Study on Corexy & Crossed Axes Cartesian Motion Platforms”, International Journal of Scientific Research and Review, ISSN NO: 2279-543X, Volume 7 Issue 3, pp. 148-152, 2018.
2017-2018R.Yasodharan, B.Srinidhi, R.Gowtham, K.Kishore kumar, S.Sabari, “Design and development of garden bot”, International Journal of Scientific Research and Review, ISSN NO: 2279-543X, Vol. 7, Issue 3, pp.203-207, 2018.
2017-2018R.Yasodharan, D.Bennaiah, Prince Roy, S.Karthick, V.Harikrishnan, “Automatic Board Wiping System”, International Journal of Scientific Research and Review, ISSN NO: 2279-543X, Vol. 7, Issue 3, pp.41-45, 2018.
2017-2018R.Yasodharan, P.Sakthimurugan, Rini Unnikrishnan, “Search and Rescue using Artificial Intelligence and Robot”, International Journal of Scientific Research and Review, ISSN NO: 2279-543X, Vol. 7 Issue 3, pp.140-144, 2018.
2017-2018R.Yasodharan, R.Mohamed Rafi, K.P.Charankumar, T.Balamurugan , “Analysis and Design of a Solar Tracker System for PV System”, International Journal of Scientific Research and Review, ISSN NO: 2279-543X, Vol.7, Issue 3, pp. 136-139, 2018.
2017-2018P.Devendran, R.Ranjith, P.Ajithkumar, V.Santhosh Balaji, “Automatic Gemstone Setting Machine in Jewels”, International Journal of Scientific Research and Review, ISSN NO: 2279-543X, Vol.7, Issue 3, pp. 200-206, 2018
2017-2018M.Anand, M.Pradeep, S.Manoj, L.Marcel Arockia Raj, P.Thamarikani , “Intravenous Drip Monitoring System”, Indo-Iranian Journal of Scientific Research, Vol. 2, Issue 1, pp. 106 -113, 2018.
2017-2018P.Mohankumar, S.Araving babu, J.Karthik, Maheshraj Pon, R.R. Muralidharan , “Kinetic Autonomous Mobile Machine, International Journal of Scientific Research and Review” ,ISSN NO: 2279-543X, Vol. 7 Issue 3, pp. 193-199, 2018.
2017-2018S.Bala Krishnan, S.Shiyam Sundaran, S.Dharun Prasath, V.Guna Kishore , “RFID based Smart Shopping kart” ,International Research Journal of Engineering and Technology, ISSN NO: 2395-0056, Vol. 5, Issue 1, pp.596-599, 2018.
2017-2018R.Sambasivam, J.K.Gokul Ram, M.Jayapal, N.Leela Krishnan, S.Subesh Melwin , “Automated Green house“, International Journal of Trend in Scientific Research and Development, ISSN NO: 2456-6470, Vol. 2, Issue 2, pp. 988-995, 2018.
2017-2018P.Kalaiselvi, S.Dhayanandh, P.Sathishkannan, R.Solairaja, A.Vijaykrishnaraj, “Design and Implementation of Auto spot Welding Machine” International Journal of Scientific Research and Review, ISSN NO: 2279-543X, Vol.7, Issue 3, pp. 177-180, 2018.
2017-2018P.Kalaiselvi, A.Vijaykrishnaraj , S.Dhayanandh, P.Sathishkannan, R.Solairaja, “Automatic wire cutting and strapping machine”, International Journal of Scientific Research and Review, ISSN NO: 2279-543X, Vol. 7, Issue 3, pp.131-135, 2018.
2017-2018T.Kousalya , L.Kanimozhi, K.Avinash, R.Jaya surya, M.Vishal, M.Manoj, “Autonomous Library Robot (Pick and Place Cartesian Type Robot)”,International Journal of Innovative Research Explorer, ISSN NO: 2347-6060 Vol.5, Issue 2, pp. 88-92, 2018.
2017-2018L.Kanimozhi, .Avinash, R.Jaya surya, M.Vishal, M.Manoj, “Design of a Library Robot with Pick and Place System” International Journal of Scientific Research and Review, ISSN NO: 2279-543X, Vol. 7, Issue 3, pp. 181-183, 2018
2017-2018L.Kanimozhi, K.Nivethithaan, K.M.Aarsha Suresh, S.Mageswari, S.Gobika, “Review of Security Threats in IoT Systems”,International Journal of Scientific Research and Review, ISSN NO: 2279-543X, Vol. 7, Issue 3, pp. 145-147, 2018.
2017-2018S.Pradeep, V.Anand, R.Harish kumar, R.Ragu, “Design and Fabrication of Sentry Gun based on Mechatronics System”,International Journal of Scientific Research and Review, ISSN NO: 2279-543X, Vol. 7, Issue 3, pp.184-192, 2018.
2017-2018S.Pradeep, S,Kiran Kishore, R.K.Harirajan, V.Mahendran, R.Karthik Kumar, “Underwater robots: a review of technologies and applications” International Journal of Scientific Research and Review, ISSN NO: 2279-543X, Vol. 7, Issue 3, pp. 9-16, 2018.
2017-2018S.Pradeep, S.Kingsly Samraj, R.Prasanth, S.Rathish, Jerome Francis, “Agricultural Robotics of Fruit Harvesting”, International Journal of Scientific Research and Review, ISSN NO: 2279-543X, Vol. 7, Issue 3, 1-8, 2018.
2017-2018A.Vishnu , A.Aravind, “Design of Mist Sprayer for Room Temperature Conditioning” International Journal of Scientific Research and Review, ISSN NO: 2279-543X, Vol. 7, Issue 3, pp.163-166, 2018.
2017-2018A.Vishnu, K.Sriram,, K.Arunkumar, S.Ashwin Ramnath, N.Praveen, “Injector based Smart Vada Maker”, International Journal of Scientific Research and Review, ISSN NO: 2279-543X, Vol. 7, Issue 3, pp. 195-202, 2018.
2017-2018R.Sambasivam, P.Devendran, Gokul, Prasanth, Santhosh Kumar, Thirunthayan, “Design and Performance Evolution of AQUA Silencer”, International Research Journal of Engineering and Technology, ISSN NO: 2395-0056 , Vol. 5, Issue 1, pp-95-98, 2018.
2017-2018R.Yasodharan, S.Karthick, Prince Roy, V.Harikrishnan, D.Bennaiah, “IoT based Classroom Automation using Arduino ”, International Journal of Trend in Scientific Research and Development, ISSN NO: 2456-6470, Vol. 2, Issue 2, pp-306-313, 2018.
2017-2018S.Pradeep,V.Anand, R.Harish Kumar, R.Ragu, “Design and Fabrication of Sentry Gun based on Mechatronics System”, International Journal of Trend in Scientific Research and Development, ISSN NO: 2456-6470, Vol. 2, Issue 2, pp-499-505, 2018.
2017-2018R.Yasodharan, B.Srinidhi, R.Gowtham, K.Kishore Kumar, S.Sabari, “A Comparison of Different Automation Techniques used in Agricultural field to Automate the Irrigation and Other Process”, International Journal of Recent Trend in Engineering and Research, , ISSN NO: 2455-1457, Vol. 4, Issue 1, pp-146-149, 2018.
2017-2018L.Kanimozhi, R.Sambasivam, M.Pragathi, M.Ranjith, “Smart Helmet with Accident Avoidance System”, International Journal of Innovative Research Explorer, , ISSN NO: 2347-6060, Vol. 5, Issue 1, pp-73-79, 2018.
2017-2018T.Kousalya, A.Vishnu, T.Rajeswaran, B.Sunil, “Intelligent Control of Electronic Appliances using Remote GSM”, International Research Journal of Engineering and Technology, ISSN NO: 2395-0056, Vol.5 , Issue 1, pp-776-780, 2018.
2017-2018L.Kanimozhi, R.Manimaran, T.Rajeswaran, S.Surjith Bharathi, “Induction Motor Fault Diagnosis using Fuzzy System”, International Research Journal of Engineering and Technology, ISSN NO: 2395-0056, Vol. 5, Issue 1, pp-1498-1502, 2018.
2016-2017P.Devendran. R.Sambasivam, “Modelling and Analysis of Corrugated Sheet Metal Bending Process”, International Journal of Innovative Research in Science Engineering and Technology, ISSN: 2319-8753, Vol. 6, Issue 1, pp. 227-233, 2017.
2016-2017R.Yasodharan,A.P.Senthilkumar, “Mathematical Modeling of Solar Tracking System Using Microcontroller”, International Journal of Modern Trends in Engineering and Science, ISSN: 2348-3121, Vol.6, Issue 1, pp. 44-47, 2017
2016-2017P.Vivekanandan, P.Kalaiselvi, “Model order reduction using improved pole clustering technique”, International journal of research in mechanical engineering,, ISSN: 2349-3860, Vol-4, issue 1,pp. 31-35, 2017.
2016-2017P.Vivekanandan, R.Sambasivam, “Investigation of real time control in dynamic system using fuzzy logic controller”, International journal of research in mechanical engineering, ISSN: 2349-3860, Vol-4, issue 1, pp.4144, 2017.
2016-2017P.Vivekanandan, M.Anand, “Design and implementation of modified fuzzy PI controller for BLDC motor”, International journal of research in mechanical engineering, ISSN: 2349-3860, Vol-4, issue 1, pp. 36-40, 2017.
2016-2017Yasodharan R,MeenatchePooja S, “Wireless Mobile Charger Using Solar Energy”, International Journal of Modern Trends in Engineering and Science, ISSN: 2348-3121, Vol. 04 Issue 02, Page no: 96-96, 2017.
2016-2017T.Prakash, P. Vivekanandhan and P. Sasikumar, “Prediction of Effect of Reinforcement Volume Fraction on Mechanical and Tribological Properties of Stir Casted AA2014/SiC MMCs”, International Journal of Printing, Packaging & Allied Sciences, ISSN: 2320-4387, Vol. 4, No. 5, pp. 4028-4036, 2016.
2016-2017P. Vivekanandan, T.Prakash, V. Roopa and A. Ramkumar, “Evaluations of Tribological Properties and Optimization of Wear and Friction of Aluminium Alloy 7075 Hybrid MMC Reinforced with Flyash, SiC and WC Using ANOVA and Genetic Algorithm”, International Journal of Printing, Packaging & Allied Sciences, ISSN: 2320-4387, Vol. 4, No. 5, December 2016, pp. 4013-4027.
2016-2017P.Kalaiselvi and M.Anand “Robust Stabilization of Dynamical System”, International Journal of Advancement in Engineering Technology, Management and Applied Science. ISSN: 2349-3224, Vol. 4, Issue 8, pp.49-57, 2017.
2016-2017S.Pradeep ,V.Sasikumar , K. Sivaguru, J. Yogaraj, R. Yuvaraj, “Electromagnetic Metal Collecting AGV”,International Research Journal of Advanced Engineering and Science, ISSN (Online): 2455-9024. Vol. 2, Issue 2, pp. 179-182, 2017.
2016-2017R.Yasodharan, V. Prakashraj “Design and implementation of automated domestic water supply using PLC and GSM”, International journal of modern trends in engineering and sciences, ISSN 2348-3121, Vol. 4, issue 4, pp. 283-285, 2017.
2016-2017R.Yasodharan,, A.P.S.Kumar, G.Murugan, “ Mathematical modelling of solar tracking system using microcontroller”, International Journal of Modern Trends in Engineering and Science, ISSN : 2348-3121, Vol. 04, Issue 01 , 2017.
2016-2017Devendran P and Sujay.S, “Analyzing the Parameters of SS 304 using TIG Welding”’, International Research Journal of Advanced Engineering and Science, ISSN 2455-9024, Vol. 2, Issue 2, , pp.31-36, 2017.
2016-2017P.Devendran, S.Muralidharan, “Pipe Measuring and Marking Machine”, International Research Journal of Advanced Engineering and Science, ISSN 2455-9024, Vol. 2, Issue 2, pp.37-40, 2017.
2015-2016P.Kalaiselvi, M.Anand and L.Kaninozhi, “Design and Implementation of Classical PI Controller for an Inverted Pendulum”, International Journal of Software and Hardware Research in Engineering, ISSN -2347 -4890, Vol. 4 Issue 3, pp1-7, 2016.
2015-2016R.Yasodharan,A.P.Senthilkumar, “Enhancement of Solar Power Tracking in Photovoltaic using Fuzzy Logic Controller” Asian Journal of Research in Social Sciences and Humanities, ISSN: 2249-7315, Vol. 6, No. 11, pp. 812-827. 2016. (Updated Journal)
2015-2016P.Kalaiselvi, M.Anand, “Continuous Blood Glucose Monitoring Using Non Invasive Technique: A review” International research Journal of Advanced Engineering and Science, ISSN : 2455-9024, Vol 01, issue 04, pp. 142-147, 2016.
2015-2016P.Kalaiselvi, M.Anand, “A Study of Continuous Blood Glucose Monitoring Using Non Invasive Technique” International Journal of Research in Mechanical Engineering, ISSN: 2349-3860, Vol 03, issue 01,pp. 49-54, 2016.
2015-2016S.Pradeep, T.Kousalya, “IoT and its connectivity challenges in smart home”, International Research Journal of Engineering and Technology (IRJET), e-ISSN: 2395 -0056, Vol. 03 Issue: 12, pp .1040-1044, 2016.
2015-2016T.Kousalya, S.Pradeep, Riniunnikrishna, Terrin.J.Mario Pereira, and Harishankar.S.P, “Study and implementation of fault diagnosis in induction motor using MCSA,” International Research Journal of Advanced Engineering and Science, ISSN: 2455-9024, Vol. 1, Issue 4, pp. 199-201, 2016.
YearPaper details
2015-2016J.Selvakumar, K.Natarajan,“ Failure Analysis of Centrifugal Pumps based on Survey “, APRN Journal of Engineering and applied Sciences.  Volume 10  pp1960-1965, March 2015.
2015-2016Gunasekharan.S, Elangovan.D, Hariram.V.R,“ Strategic Approach towards Lean Industrial Transformation from Traditional Systems using Lean Industrial Model for Sustainability (LIMS)“,International Journal of Mechanical Enginnering and Information Technology. Volume 3  pp 1494 -1501 2015.
2015-2016R.Dharmalingam, K.K.Sivagnanaprabhu, J.Yogaraja, S.Gunasekharan, R.Mohan
“Experimental Investigation of Heat Transfer Characteristics of Nano Fluid Using Parallel Flow, Counter Flow and Shell and Tube Heat Exchanger “,International Journal of Archive of Mechanical Engineering.Volume 62 pp 509-522, 2015.
2015-2016Karthik.V, Hariram V.R, Karthick.B, Sindhukavi.M “Flexible Manufacturing System layout Optimization (Using Heuristic Technique)” International Journal of Applied Science and Research. pp 204-215,December 2015.
2015-2016Karthick.B, Sindhukavi.M,Karthik.V, Hariram V.R “Effect of Heat input on Mechanical and Microstructure Properties of 316L Stainless Steel Plates “, International Journal of Applied Science and Research. pp 216-220,December 2015.
2015-2016R.Thirumalai  Karthik S “Friction Stir Welding Aa1100 Aluminium Alloy “, International Journal of Advances in Natural and Applied Sciences. pp57-66, Vol. 10 No. 6 (2015)
2015-2016T Venkatajalapathi “Experimental Investigation on Use of Liquid Alcohol Mixture for Cooling of Electronic Equipment in a Square Enclosure“, International Journal of Advances in Natural and Applied Sciences. pp 244-250, Vol. 10 No. 6 (2016)
2016-2017L.Savadamuthu, K.Malarvizhi and T.Rakhul , ” Study on Machinining Parameters of AISi H 13 Diesteel in Wire-Dem Process ” , Asian Journal of Research in Social Sciences and Humanities, ISSN: 2249-7315, Vol..6 , No. 6, pp 499-507,June 2016.
2016-2017K.Malarvizhi , L.Savadamuthu , and MadhusudhanKumar, ” ELM Based Speaker Dependent Speech to Text Conversion” , Asian Journal of Research in Social Sciences and Humanities, ISSN: 2249-7315, Vol..6 , No. 6, pp 811-823,June 2016.
2016-2017V. Sathiyamoorty,T.Sekar and M.Subramanian , ”  Experimental investigation on the effects of nano fluid in ECM of high carbon high chromium die tool steel” , Asian Journal of Research in social sciences and humanities,ISSN: 2249-7315, vol.6, issue 8
2016-2017K.Prakash “Optimisation of Wind Turbine with Diffuser using CFD Tool” International Journal of Engineering Sciences & Research Technology, ISSN:2277-9655 Vol no. 6 Issue no 1, Jan 2017
2016-2017R Dharmalingam, R.Kandasamy, K.K.Sivagnana Prabhu , ” Lorentz Forces and Nanoparticle Shape on Water based Cu, Al2O3 and SWCNTs”,  International Journal of Molecular Liquids,  ISSN: 0167-7322  Vol.1, pp 01-10, Februaury 2017
2016-2017Ganeshkumar R “Design, Fabrication and Comparision of Heat Transfer analysis in Annular Disc Fin and  Annular Stepped Fins by Experimental and Numerical Methods ” International Journal of Engineering Sciences & Research Technology, ISSN:2278-0181 Vol no. 5 Issue no 7, pp 1- 9 March 2017
2016-2017Dharmalingam R, Tamilselvam P, “Enhancing the Performance of solar flat Plate collector by using copper oxide nano fluid ” International Journal of Engineering Sciences & Research Technology, ISSN:2278-0181 Special Issue , pp 144- 146  March 2017
2016-2017Chelliah A “Diminishing the casting defects by using optimization technique ” International Journal of Engineering Sciences & Research Technology, ISSN:2278-0181 Vol no. 5 Issue no 7, pp 136- 140 March 2017
2016-2017Karthik V “Extraction of biodiesel from jatropha oil by Transesterification process ” International Journal of Engineering Sciences & Research Technology, ISSN:2278-0181 Vol no. 5 Issue no 7, pp 163- 166 March 2017
2016-2017Karthik V “Design and simualtion of truck cabin cooling system by Vapour absorption Refrigeration system using Engine Exhaust” International Journal of Engineering Sciences & Research Technology, ISSN:2278-0181 Vol no. 5 Issue no 7, pp 115- 118 March 2017
2016-2017G Tharanitharan “Analysis of Mechanical Properties of Hybrid Cocous Nuicifera & Agva Sisalana Woven Fiber Laminate Composities” International Journal of Engineering Sciences & Research Technology, ISSN:2278-0181 Vol no. 5 Issue no 7, pp 32- 35 March 2017
2016-2017Jeevarathinam A, Karthik V “Reduction of Sand  Casting Defects by applying Taguchi Analysis” SSRG International Journal of Mechanical Engineering , ISSN:2348-8360 Special Issue,
pp 48- 52 March 2017
2016-2017G Tharanitharan “Analysis of Mechanical Properties of Hybrid Cocous Nuicifera & Ananas Comosus Woven Fiber Laminate Composites” Asian Journal of Applied Science and Technology, Vol no. 1 Issue no 3, pp 221- 225  April 2017
2016-2017Chinnasamy C, Tamilselvam P, V.Karthik, B.Karthick “Optimization and characterization studies on Green synthesis of Silver Nanoparticles using Response Surface Methodology” Journal of Advances in natural and applied sciences, ISSN: 1995-0772 Vol.4 , Issue No. 1, pp 214-221, Apr 2017
2016-2017P.Janagarathinam, “A Study On Wet And Near-Dry Electrical Discharge Machining Process Of Inconel 718” Journal of Advances in natural and applied sciences, ISSN: 1995-0772 Vol.4 , Issue No. 1, pp 260-269, Apr 2017
2016-2017S.Hemnath,  A.Natarajan, A.Karthi ,  K.Prakash, “Design And Development Of Tig Welding Test Rig ”  Journal of Advances in natural and applied sciences, ISSN: 1995-0772 Vol.4 , Issue No. 1, pp 270-276, Apr 2017
2016-2017T.Pravin, “Investigation on Mechanical Properties of Aluminum with Copper and Silicon Carbide Using Powder Metallurgy Technique” Journal of Advances in natural and applied sciences, ISSN: 1995-0772 Vol.4 , Issue No. 1, pp 277-280, Apr 2017
2016-2017M.Sureshkumar,  P.Tamilselvam, G.Tharanitharan, “Analysis Of Hybrid Fiber Mono Composite Leaf Spring For Automobiles”Journal of Advances in natural and applied sciences, ISSN: 1995-0772 Vol.4 , Issue No. 1, pp 281-287, Apr 2017
2016-2017Hariram V R, Karthick B, “Improving Industrial Performance Using Lean Tools And Operations Research”Journal of Advances in natural and applied sciences, ISSN: 1995-0772 Vol.4 , Issue No. 1, pp 295-299, Apr 2017
2016-2017Sanjay Singh, Somu C, Arumugam, “Property correlations of cast AA 713.0/MWCNT metal matrix composite” Journal of Advances in natural and applied sciences, ISSN: 1995-0772 Vol.4 , Issue No. 1, pp 222-234, Apr 2017
2017-2018Mohammed Ariffudeen, “Fatigue analysis of Stiffness panel with a large cut out in an aircraft”, International Journal of  Scientific Research Organisation, ISSN: 2456-6942, Vol no. 1, Issue no. 2 May 2017 pp 1-5
2017-2018Mohammed Ariffudeen, “Design and Analysis of Chevron nozzle in Aerodynamic”, International Journal of  Scientific Research Organisation, Vol no. 1, Issue no. 2  ISSN: 2456-6942, May 2017 pp 6-10
2017-2018Vimalkoodeeswaran.A “Design and Fabrication of secondary cabin cooling system for automobile” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Mohan.N “Cam operated gear shifting mechanism” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Natarajan.A “Cycle Time Reduction In CNC Turning For Submersible Pump Impeller” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Selvakumar.J “Design and Fabrication of Intelligent Footboard Accident Prevention System” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Dr.Subramanian.M “Optimization of Process Parameter of Turning Aluminium 6061 Using FEA, RSM & GA” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Somu.C “Review on Processing of Nano Tubes” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018K.Prakash “Theoritical Study of Flow measuring Device” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Ganesh Kumar R “Analysing the Effects on the Flow and Heat Transfer Performance in CFMCHE by Analytical amd Numerical solutions International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Natarajan.A “Technique to detect and Reduce Cracks Occuring in Welding” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Karthikeyan.R “Hybrid Bike using LPG and Electric Battery” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Kaushik.V.S “Cycle Time Reduction in CNC Machine of Flywheel Component 852” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Dr.Ranjith R “Characterization of friction stir processed aluminium-magnesium alloy” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Vetrivel A “Design and Analysis of Connecting Rod by using Composite Material” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Natarajan A “Causes and Remedies of Blow Holes in Sand Casting” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Selvakumar.J “Solar Operating 3 in1 Agricultural Machine” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018B.Karthick “Implementation of Six Sigma tools in automombile service sectors” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Dr.P.Tamilselvam “Experimental Investigation on Recovery Boiler for the enhancement of Steam Production” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Karthick U “Implementation of Anti Lock Braking system in Train” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Suresh Kumar M “Reduction of Bearing Damage by Conditional Monitoring using ON-Board Accelerometer” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Dr.M.Subramanian “Modelling and Analysis of Surface Rougness on end milling of Al 6061” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Dr.R.Ranjith “Air Driven Engine” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Kaushik.V.S “Model Analysis of Aluminium 7068 alloy Using End Mill Cutter” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018M. Saravanakumar “Experimental Investigation of Machining of Stainless steel using dry and gas cooled Environment” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Dr T Prakash “Performance analysis on Oxygen enriched Diesel Engine for various compression ratios” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Chinnasamy C, T.Prakash “Review on influence of corrosion and cavitation of various materials of diesel engine parts while using bio-diesel as fuel” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018R Karthikeyan, A.Vetrivel “Mechanical and Wear properties of Aluminium hybriid composite (Al/TiC/Graphite) Fabricated by powder metallurgy” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018M Subramanian “Design and Fabrication of Organic fertilizer spraying Machine” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018M Subraminian “Design and Fabrication of Automatic corrugated Partition Box Assembler” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Janagarathinam P,Dr. Subramanian M  “A literature survey on Mechanical properties in Aluminium Matrix Reinforced Composites” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018L Savadamuthu, M Saravanakumar, M Suresh Kumar “Multi Charecteristic optimization in Wire Cut EDM by using Taguchi Data envelopment Analysis based ranking methodology” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Dr T Prakash “Low Cost material Handling Using PLC” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Mr S Hemnath “Design and Fabrication of Fixture for Tasper Grinding Process” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018K Prakash “Performance Analysis of Shell and Tube Heat Exchanger Using Wave Strips” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018M Suresh Kumar “Design add Fabrication of Double braking Single lever System For Two Wheelers” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018V Karthick “Metallic Swarf Compression machine using PLC” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018N Rajiv Kumar “Inbuilt Sunshade Car Cover” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018A Vimal Kodeeswaran “Performance and Analysis of Solar Still With Evacuated Tube” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Mohammed Ariffuddeen M “Comparitive Analysis of Bone Tissue Using Rapid Prototyping Technology” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018K Prakash “Increasing the Properties of H30 Aluminium Alloy” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018C Senthil Kumar “Exergy Analysis of Blended Refrigerant” International Journal of Innovative Research Explorer Vol no 5, Issue 3, MAR 2018
2017-2018Janagarathinam P “Multipurpose Agriculture six legged robot for Seeding and Watering” International Journal of Intelluctual Advancements And Research in Engineering Computations Vol 6 Issue 1
2017-2018J Selvakumar, K Natarajan, ” Reliability analysis of centrifugal pump through FMECA and FEM” International journal of performability engineering, Vol. 13, No. 2,  pp. 119-128, 2017
2018-2019R.Selladurai, T.Sakthivel, C Chinnasamy, M.Subramanian” Influence of compression ration onto the operating attributes of palm oil powdered diesel engine with alumina nanoparticles”, International journal of Research, Vol VII, Issue VII, pp 1-23.july 2018.
2018-2019R.Selladurai, T.Sakthivel, C Chinnasamy, M.Subramanian” Effect of different metal oxide nano additives in jatropha powdered diesel engine, International journal of Research, Vol VII, Issue VII, pp24-42.july 2018.
2018-2019R.Selladurai, T.Sakthivel, C Chinnasamy, P.Senthilkumar, “Experimental studies on the performance and emission characteristics of compression ignition engine fuled with jatropha and pongamia biodiesel along with Alumina Nano particles, International journal of Research, Vol VII, Issue VII, pp43-52.july 2018.
2018-2019DR.T.PRAKASH,” A Review of lean manufacturing tools in automobile industries”, International Conference  on Advanced Production and Industrial Engineering (ICAPIE ’18)
2018-2019Dr.T.Prakash, “Implementiung warehouse Management systems in Logistics: A Case study, Journal of Logistics, Supply Chain and Retail Management
2018-2019G.Tharanitharan, Dr.P.Tamilselvam, S.Barathraj, R.Arunkumar, T.Tharoon, “Modeling on Machining Parameters of Hybrid Coir/Sisal Reinforced Vinyester Composite – June 2018.
2018-2019U.Karthi, A.Vimalkodeeswaran, T.Pravin,P.Divyakumar,  , “Hybrid Motor Vehicle”, International Journal of Mechanical Engineering(SSRG – IJME), ISSN NO:2348 – 8360, ICFTESH, Feb 2019.
2018-2019B.Aravinth, Ramesh, P.Janagarathinam,” preparation and Design analysis of polymer composite gears”, International Journal of Research, ISSN NO:2236-6124,Vol III, Issue III, March 2019.
2018-2019S.Hemnath,”Image Based Vehicle Speed Detecting Device to Avoid accidients in Street Roads”, International Journal of Research, ISSN NO:2236-6124,Vol III, Issue III, March 2019.
2018-2019S.Hemnath,”Lead Time reduction of Motor Control Center by Lean Manufacturing,  International Journal of Research,ISSN NO:2236-6124,Vol III, Issue III, March 2019..
2018-2019P.Janagarathinam, E.Kumerasan, S.Kaviyarasan, “Investigation on EDM of composites Material (Al 6068 & TiO2) using optimization technique”, International Journal of Research,Vol III, Issue III, March 2019.
2018-2019T.Venkatajalapathi, C.Somu, P.Manojkumar,. “Design and Development of Portable Air cooler by using evaporative cooling method with use of cocunut fiber coir, Vol III, Issue V, May 2019.
2019-2020Dr.T.Prakash, “Latest development in Logistics and supply chain systems Implementation” RSP Science Hub,International Research Journal on Advance science Hub, ISSN:2582-4367, vol2, issue 4, April 2020.
2019-2020Dr.T.Prakash, “IoT based smart irrigation for Multicropping system system ” RSP Science Hub, International Research Journal on Advance science Hub, ISSN:2582-4367, vol2, issue 4, April 2020.
2020-2021P.Tamilselvam, G.Tharanitharan, “Performance and emission characteristics of a VCR SI engine fueled with ethanol/gasoline blends” International Journal of Advance, Research, Ideas and Innovation in Technology, ISSN:2454-132X, Vol6, Issue3, PP 914-918, June2020.
YearPaper details
2019-2020Kavitha.R , R.Manikandan , S.Gangatharan, R.Sinduja, Emergency Accident Retrieval System,
International Journal for Scientific Research & Development, Vol. 8, Issue 5, 2020, pp-363-367, ISSN (online): 2321-0613,Aug-2020
2018-2019P.Naresh Kumar, K.Sakthivel, V. Balasubramanian, D. Sengottaiyan and J.Suresh,
“Microwave assisted green synthesis of ZNO nanorods for dye sensitized solar cell application”, Indian Journal of Chemical Technology,vol. 25,no. 4,pp. 383-389, ISSN:0971-457X, JULY-2018
2018-2019V.Kannappan , P.Nareshkumar, B. Vijayakumar  , V.Sathyanarayanamoorthi , “Spectroscopic and Quantum Chemical Investigations on Sitaglyptin,
a potential DDT – 4 inhibitor”, International journal of Basic and Applied Research, Vol.8, issue.8,pp.766-787, ISSN: 2395-3438, ISSN(O)-2395-3446 ,AUG-2018
2017-2018P Naresh Kumar, K Sakthivel, M Saravanakumar, Akila Yuvapragasam, B Vijayakumar,
“Terminalia catappa fruit pigments for dye sensitized solar cell applications”, To Chemistry Journal, Vol.1, Issue.1,ISSN:2581-7507,April-2018
2016-2017P Naresh Kumar, K Sakthivel, V Balasubramanian,”Microwave assisted biosynthesis of rice shaped ZnO nanoparticles using Amorphophallus konjac tuber extract and its application in dye sensitized solar cells”Materials Science-Poland, Vol.35 issue.1,pp.111-119, ISSN 2083-1331, FEB-2017
2017-2018V Balasubramanian, P Naresh Kumar, D Sengottaiyan, “Effect of deposition temperature on structural, optical and electrical properties of copper bismuth sulphide (CuBiS2) thin films deposited by chemical bath deposition”, Material Science Poland, Vol.35 issue.2,pp.329-334, ISSN 2083-1331, JULY-2017
2015-2016P.Naresh Kumar, K.Sakthivel, “PREPARATION AND CHARACTERIZATION OF LOW COST PRUSSIAN BLUE SENSITIZED SOLAR CELL”, Journal of Ovonic Research, Vol.11, isuue.4, pp.169-173, July-2015
2015-2016Balasubramanian, V., Naresh Kumar, P. and Sengottaiyan, D. “Effect of annealing temperature on the current-voltage and Hall effect studies of Bi2S3 thin films grown on glass substrates by using chemical bath deposition”, Advances in Applied Science Research, Vol. 6,  No. 4, pp. 190-195, 2015.

Students Publication

YearDetails
2019-2020Thejus Joshy, Mohandharnesh Published a Paper on “Estimation of Tensile and Shear Strength of Glass Fibre Reinforced Polymer Composite,” 2020 TEST Engineering and Management (TEST), Coimbatore, ISSN: 0193-4120 Page No. 11692-11695
S. Gopikannan, V.Harish and V. Kavin, “Estimation of Mechanical Properties of Water Augumented Pulse Jet Engine,” 2020 International Journal of Advanced Research (IJAR), Coimbatore,Int. J. Adv. Res. 8(03), 747-755
2018-19S.N.LOGU, K.NEHRU, B.GOBIKA, M.VEERASOUNDHARY ” DESIGN AND ANALYSIS OF PLIANT WING” International Research Journal of Engineering and Technology (IRJET), Volume: 06 Issue: 03, PP 4007- 4011, e-ISSN: 2395-0056, p-ISSN: 2395-0072,  Mar 2019
AMBARISH J, HARISH G Published International Journal entitled on “DESIGN AND ANALYSIS OF HONEYCOMB HELMET FOR SPORTS TWO WHEELER RIDERS”, Published in International Journal of International Research journal of Engineering and Management Studies (IRJEMS), e-ISSN: 2395-0126. Volume: 03 Issue: 04 | April -2019
 Vignesh.D, Muthamizh.M “Non Linear Analysis Of Snap Lock For Aircraft Seat Belt” International Journal of Scientific Development and Research,Coimbatore,Int. J. Adv. Res. 8(03), 148-152
M, Aravind B, Rahul V, Reshma G Published a Paper on “Design, Fabrication and Testing of a Remote – Controlled Airplane with High – Payload Ratio” in INTERNATIONAL JOURNAL OF CREATIVE RESEARCH THOUGHTS  6 (Issue 2), 353-357
M Sangeetha T Saradha P Shalini I R Published a Paper on “Design and Performances Analysis of Micro Turbine in Turbojet Engines” in INTERNATIONAL JOURNAL OF CREATIVE RESEARCH THOUGHTS  6 (2320-2882), 345-352
 Vishnu Varthan S, Hariharasudhan, R Siva ponnesh.B.G  “Design and Analysis Of Landing Gear For Estimate Mechanical Properties” Journal of Emerging Technologies and Innovative Research (JETIR),Vol 6 Issue No 3 Page no 420-424
2017-2018 Mohankumar M , Krishna Gupta K, Tamizharasan T  “Bird strike analysis on jet engine fan blade” International Journal of Advanced Reaserch and Development, Vol 3 Issue No 4 Page no 144-149
S.N.Logu, SRIVIDHYA S, ” SLATS A prominent noise reducer” INTERNATIONAL JOURNAL OF SCIENCE AND INNOVATIVE ENGINEERING & TECHNOLOGY”,VOLUME 2, PP 1-11 ISBN No. 978-81-923607-3-7, MAY 2018
Ajithkumar R, Durairaj B, Muneeswaran M, Rishi Kumar S Published International Journal entitled on “OPTIMAL LOCATION OF PIEZOELECTRIC PATCHES FOR VIBRATION CONTROL USING HARMONIC ANALYSIS IN AIRCRAFT WING”, Published in International Journal of Advanced Engineering and Research Development(IJAERD), e-ISSN: 2348-4470, p-ISSN: 2348-6406(UGC Approved), Volume 05 Issue 03.03.2018.
S.N Logu, V.David, J.Daffodil Carmel, G.Vinodha, S.Manibharathi ” DESIGN AND FABRICATION OF RC PLANE WITH FLEXIBLE WINGS” International Journal of Advance Engineering and Research Development, Volume 5, Issue 03, PP 1438- 1442,  e-ISSN (O): 2348-4470, p-ISSN (P): 2348-6406, March 2018
2016-2017S.N.Logu,R.Karthika,S.Gowtham,B.Arunkumar &V.Janani “Analysis of 2-Dimensional Hypersonic  Waverider”Imperial Journal of Interdisciplinary Research (IJIR),Vol-3, Issue-4, PP 1408- 1411 ISSN: 2454-1362, March 2017
S.Merryisha Sweety Gracia , S.Sam Vimal Kumar, S.Z.Syed Afsar “Numerical Simulation Over A 2d Compression Ramp” in International Conference on Emerging Techniques in Engineering, Science & Management
C Gayathri Published a Paper on “Prevention of moisture content on aircraft structure surface based on lotus effect” in Advances in Natural and Applied Sciences 10 (17), 281-287
S.Gowtham,R.Karthika Published manuscript entitled with “CFD ANALYSIS OF TANDEM WINGED AIRCRAFT”, in international journal of engineering research and reviews (IJERAR), on 06.01.2017.
S. Sam Vimal Kumar, S.Z. Syed Afsar Published a Paper on “Numerical Simulation Over A 2d Compression Ramp” in Middle-East Journal of Scientific Research 24 (10), 3324-3328
2015-2016 X. Bernadette Evangelin   “Design and Performance Analysis of Hypersonic Inlet in Scramjet Engine” in International Conference on Mechanical and Building Sciences
YearDetails
2018-19Hariharan.M, Nandhakumar.A, Yashwanth.G IV Year Auto Department has Published a Research Paper on, ” Fabrication of cruise control in E bike”, International Research journal of Engineering and Technology, Volume: 06, Issue: 03, Mar 2019
Arun Prasath.V.K, Dinesh.G,Ilango.G IV Year Auto Department has Published a Research Paper on, ” Design of eco friendly gasoline engine using bio gasoline for energy conservation”, International Research journal of Engineering and Technology, Volume: 06, Issue: 03, Mar 2019
Gowtham.L, Santhosh.V, Vignesh.R IV Year Auto Department has Published a Research Paper on, “Design of eco friendly system in automobile for environmental safety”, International Research journal of Engineering and Technology, Volume: 06 Issue: 03,  Mar 2019
Aravind.S.N, Gokul.R, Krishna Kesav.S IV Year Auto Department has Published a Research Paper on, “E-safety system for two wheelers”, International Research journal of Engineering and Technology, Volume: 06 Issue: 03  Mar 2019
Ashith Raj.R, Brian Joel.M, Jeipraveen.R IV Year Auto Department has Published a Research Paper on, “Smart way to Reduce car cabin Temperature by using thermoelectric cooler”, International Research journal of Engineering and Technology, Volume: 06 Issue: 03  Mar 2019
Saravanakumar.M, Shibi.U.N, Vineth.R IV Year Auto Department has Published a Research Paper on, “Vehicle monitoring system”, International Research journal of Engineering and Technology, Volume: 06 Issue: 03  Mar 2019
Aswin Nantha.R, Jaganath.B.M, Sharan Kumar.R IV Year Auto Department has Published a Research Paper on, “Design and fabricatiom of hubless bike”, International Research journal of Engineering and Technology, Volume: 06 Issue: 03  Mar 2019
Giri Prasad.P, Santhosh.S, Vinoth Raja.C IV Year Auto Department has Published a Research Paper on, “Solar powered electric bicycle”, International Research journal of Engineering and Technology, Volume: 06 Issue: 03  Mar 2019
Mani Kandan.S, Santhosh.M (08.12.1997), Sudharsan.V IV Year Auto Department has Published a Research Paper on, “Engine oil colour monitoring system”, International Research journal of Engineering and Technology, Volume: 06 Issue: 03  Mar 2019
Praveen Kumar.K.R, Ramkumar.K, Vigneswaran.T IV Year Auto Department has Published a Research Paper on, “Design optimisation and fabrication of hybrid two wheel drive motorcycle”, International Research journal of Engineering and Technology, Volume: 06 Issue: 03  Mar 2019
Hari Krishna.M, Manibalamanickam.S, Raghul.S IV Year Auto Department has Published a Research Paper on, “Fabrication of LPF powered four stroke two wheeler”, International Research journal of Engineering and Technology, Volume: 06 Issue: 03  Mar 2019
Dharun.D.S, Gokul.R, Sreerag.S IV Year Auto Department has Published a Research Paper on, “Converstion of IC engine vehicle to electric vehicle”, International Research journal of Engineering and Technology, Volume: 06 Issue: 03  Mar 2019
Dhinesh Kumar.P, Manobala.M, Prabhu.S.P IV Year Auto Department has Published a Research Paper on, “Design and fabricatiom of hybrid petrol tank”, International Research journal of Engineering and Technology, Volume: 06 Issue: 03  Mar 2019
Santhosh.M (22.12.1997) IV Year Auto Department has Published a Research Paper on, “Design of O-T Charging system for next gen electric vehicles”, International Research journal of Engineering and Technology, Volume: 06 Issue: 03  Mar 2019
Akilan.V, Arun Prasanth.E, Pranesh.M   IV Year Auto Department has Published a Research Paper on, “Design and fabrication of pneumatic bumper for four wheeler”, International Research journal of Engineering and Technology, Volume: 06 Issue: 03  Mar 2019
Devaraj.K, Gowtham Kumar.K, Kumar.S   IV Year Auto Department has Published a Research Paper on, “Experimentation of perfomance and emission test in single cylinder SI engine with turbocharger &EGR”, International Research journal of Engineering and Technology, Volume: 06 Issue: 04  Apr 2019
2019-20N Afridhin, D Aravind, G Kamalesh, K Rathish Kumar  IV Year Auto Department has Published a Research Paper on, “Design and Fabrication of an Electric Bike”, International Research journal of Engineering and Technology, Volume: 07 Issue: 02  Feb 2020
Aravind Krishnan.V, Melbin.C.M, Manivasakm.J, Yoganandhan.M  IV Year Auto Department has Published a Research Paper on, “Alternative Power Source Engine”, International Research journal of Engineering and Technology, Volume: 07 Issue: 02  Feb 2020
T. Kabilan, G. Naveen kumar, V. Srinivas  IV Year Auto Department has Published a Research Paper on, “Onboard Charging System For Electric Vehicle”, International Research journal of Engineering and Technology, Volume: 07 Issue: 05  May 2020
G.Hariharan, N.Hariharan, M.Mohanarangan, S.Prithiviraj  IV Year Auto Department has Published a Research Paper on, “Design and Fabrication of Excavator Assist with Wheels”, International Research journal of Engineering and Technology, Volume: 07 Issue: 04 Apr 2020
M. Alain Frederic, P. Thamil Selvan, S. Vijay  IV Year Auto Department has Published a Research Paper on, “Electromagnetic Accident Avoiding System”, International Research journal of Engineering and Technology, Volume: 07 Issue: 03 Mar 2020
R. Manojkumar, K. Mathan Kumar, S. Sri Ram  IV Year Auto Department has Published a Research Paper on, “Design and Modification Of Dump Truck To Avoid Accidents Due To Protruded Rods and To Reduce Material Theft”, International Research journal of Engineering and Technology, Volume: 07 Issue: 03 Mar 2020
YearDetails
2018-2019Lakshmi T of III BME has participated in Technical paper presentation “ANEMOI – 18” at Jayam College of Engineering and Technology, Dharmapuri on 05.10.2018
2018-2019Divyadarsan S of III BME has participated in Technical paper presentation “ANEMOI – 18” at Jayam College of Engineering and Technology, Dharmapuri on 05.10.2018
2020-2021J. infantnesan, Nivetha R and Susmitha P of II BME has published a paper titled “Artificial Sleep Inducer by Generating Electromagnetic Waves” in Mukt Shabd Journal, ISSN NO: 2347-3150, Volume IX, Issue VI, JUNE/2020.
2020-2021Abinandh. A of III BME has published a paper titled “Review on the Developments in Prosthetic Amputation Technology” in International Journal of Innovative Research in Technology, Volume 6, Issue 1, pp 331 – 335, 2020
YearDetails
2017-18M.Priyanga, P.Srishadurya, from I M.E Struct, Department of Civil Engineering has published a Research Paper on,“Analysis of Ground Water Quality in Ramanathapuram Municipality”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 573-579, 2017. (Listed in UGC and Annexure II – Anna university)
M.Priyanga, P.Srishadurya, from I M.E Struct, Department of Civil Engineering has published a Research Paper on “Assessment of Ground Water Quality in Ramanathapuram Municipality using Geographical Information System (GIS)”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 580-588, 2017. (Listed in UGC and Annexure II – Anna university)
P.Srishadurya, M.Priyanga, from I M.E Struct, Department of Civil Engineering has published a Research Paper on “Experimental Investigation of Strength Characteristics on Beams using Plastic”, International Journal of ChemTech Research, ISSN: 0974-4290, ISSN(Online):2455-9555, Vol.10 No.8, pp 403-408, 2017. (Listed in UGC and Annexure II – Anna university)
2016-17X.John Britto, from II M.E Struct, Department of Civil Engineering has published a Research Paper on “Structural Rehabilitation of beams with steel Fibre reinforced UHSC strips”, International Journal of Advanced Engineering Technology E-ISSN 0976-3945, Vol. VII/Issue III/July-Sept.,2016/01-04. (Listed in Annexure I – Anna university)
Roobha lavanya. M, from II M.E Struct, Department of Civil Engineering has published a Research Paper on “Investigation On Steel Fibre Reinforced Geo Polymer Concrete Using By Products of Industrial Waste”, Advances In Natural And Applied Sciences, ISSN: 1995-0772 EISSN: 1998-1090, 2016 Special 10(10): pages 81-97. (Listed in Annexure II – Anna university)
S.Manikandan, from II M.E Struct, Department of Civil Engineering has published a Research Paper on “Experimental Study on Self Curing Concrete With and Without Polypropylene Fibre”, Advances In Natural And Applied Sciences, ISSN: 1995-0772 EISSN: 1998-1090, 2016 Special 10(9): pages 398-404. (Listed in Annexure II – Anna university)
Vignesh E,” from II M.E Struct, Department of Civil Engineering has published a Research Paper on Comparative Study on Readymix Concrete With and Without Stabilizer”, Advances In Natural And Applied Sciences, ISSN: 1995-0772 EISSN: 1998-1090, 2016 Special 10(9): pages 432-439. (Listed in Annexure II – Anna university)
2015-16T.Nalavendhan, from II M.E Struct, Department of Civil Engineering has published a Research Paper on “Durability studies on High Performance concrete using Different Mineral admixtures”, International Journal of Applied Engineering Research ISSN 0973-4562 Volume 10, Number 19 (2015) (Listed in Annexure II – Anna university)
R. Dinesh Kumar, from II M.E Struct, Department of Civil Engineering has published a Research Paper on “Durability Studies on Self Compacting Geopolymer Concrete using different Mineral Admixtures”, International Journal of Applied Engineering Research ISSN 0973-4562 Volume 10, Number 19 (2015) (Listed in Annexure II – Anna university)
YearDetails
2019-20Divya S Gowsalyaa.M and Kanimozhi.V of II ME CSE submitted journal on the topic “A Survey of Black and Gray Hole Attacks in Wireless Mobile Ad Hoc Networks” International Journal for Scientific Research & Development Vol 4,Issue 9(2016)pp.931-935.
Gowsalyaa.M Kanimozhi.V and Mohanapriya.T of II ME CSE submitted journal on the topic “A Survey on Intelligent Controller System for Home Automation System” International Journal of Scientific Research in Science, Engineering and Technology Vol 2,Issue 6(2016)pp.143-145.
Kanimozhi.V Mohanapriya.T and Brindha Devi.M of II ME CSE submitted journal on the topic “A Survey on Intelligent Controller System for Home Automation System” International Journal of Scientific Research in Science, Engineering and Technology Vol 2,Issue 6(2016)pp.143-145.
Mohanapriya.T Brindha Devi.M and Kayalvizhi.S of II ME CSE submitted journal on the topic “A Survey on Intelligent Controller System for Home Automation System” International Journal of Scientific Research in Science, Engineering and Technology Vol 2,Issue 6(2016)pp.143-145.
Brindha Devi.M Kayalvizhi.S and Macdalin Divya Nansi of II ME CSE submitted journal on the topic “A Survey on Intelligent Controller System for Home Automation System” International Journal of Scientific Research in Science, Engineering and Technology Vol 2,Issue 6(2016)pp.143-145.
2018-19P.Sanjay Singh, R.Rogani, S.Sathish Kumar fromIII CSE Chave published paper on “Smart Health Care Using IoT” Journal of Advanced Research in Dynamical and Control Systems Issue 3(2018)pp.884-887.
“S.Abinaya J.Angel Rini Mejola, and B.Dinesh Babu of IV CSE A submitted journal on the topic International Journal Of Scinand Review Shoulder Peak Resistant Pin Entry Scheme Using Concentrate Haptic Feedback International Journal Of Scientific Research and Review Volume 7,Issue 3 (2019)pp.189-195.”
“R.Ambrish S.Ashwini and M.K.Dharun Surya of IV CSE A submitted journal on the topic Piezoelectric Based AutomaticPower Generation Using IOT International Journal Of Scientific Research and Review Volume 7,Issue 3 (2019)pp.120-126.”
“Mr.Balaji Raju.M Mr.Balasubramanian.R and Ms.Harshini.K of IV CSE A submitted journal on the topic Secure And Efficient Data Transmission In Cluster Based Wireless SensorNetwork with RSA Algorithm International Journal Of Scientific Research and Review Volume 7,Issue 3 (2019)pp.431-440.”
“Bhavani .S Gunapathi.S and Kavipriya.S of IV CSE A submitted journal on the topic Cryptolin Chatroom Using Cloud International Journal Of Scientific Research and Review Volume 7,Issue 3 (2019)pp.172-176.”
“Gowtham.M Harini.G and Karthick.V of IV CSE A submitted journal on the topic Automatic Speed Limiting System For Vechicle Using RFID And IoT In Smartcity International Journal Of Scientific Research and Review volume 7,Issue 3 (2019)pp.115-119.”
“Hariharan Ragavendra.R Jeyakumar.A.B and Karthick.S of IV CSE A submitted journal on the topic Key Deduplication With Block And File level International Journal Of Scientific Research and Review Volume 7,Issue 3 (2019)pp.196-202.”
“Shanmugapriya.K Suwetha S Raam and Thaarani.S of IV CSE C submitted journal on the topic VPN recognition and optimization in sdn enabledcloud environment International Journal Of Scientific Research and Review Volume 7,Issue 3 (2019)pp.137-143.”
“Sandhya.S Reshma.U and Sangeetha.D of IV CSE C submitted journal on the topic Intelligent power management for college auditorium International Journal Of Scientific Research and Review Volume 7,Issue 3 (2019)pp.140-145.”
“Muthu Kumar.S Naveenraja.M and Naveen Kumar.V of IV CSE B submitted journal on the topic Sensor based automatic fertigation system International Journal Of Scientific Research and Review
Volume 7,Issue 3 (2019)pp.253-256.”
“Keerthana.S Keerthi Varshini.V and S.Madhumitha of IV CSE B submitted journal on the topic Smart helmet using sensor International Journal Of Scientific Research and Review
Volume 7,Issue 3 (2019)pp.110-114.”
“P.Manibharathi M.Muthu Veeralakshmi and R.Nandhini of IV CSE B submitted journal on the topic Plugin software for e-commerce website International Journal Of Scientific Research and Review Volume 7,Issue 3 (2019)pp.111-116.”
“Kavitha.M LogaSweetha.E and Mahalakshmi.C of IV CSE B submitted journal on the topic Prediction of cardiac arrest using iot International Journal Of Scientific Research and Review Volume 7,Issue 3 (2019)pp.167-171.”
“K.Mythili P.R.Nivedha and P.Radhiga of IV CSE B submitted journal on the topic An automatic light and fan control system using ultrasonic sensor through wi-fi International Journal Of Scientific Research and Review Volume 7,Issue 3 (2019)pp.41-48.”
“Aparnaa M Bhuvaneswari.M and HariPrasad .S of IV CSE A submitted journal on the topic Encrypted Cloud Storage Search International Journal Of Scientific Research and Review Volume 7,Issue 3 (2019)pp.144-149.”
“Amutha Devi.S Dharani.R and Elavanchi Nachiyar.K of IV CSE A submitted journal on the topic Smart Garbage Monitoring Bin Using IoT International Journal Of Scientific Research and Review
Volume 7,Issue 3 (2019)pp.107-114.”
“Harismitaa R K Anto Praveena .K.J and Ashley James of IV CSE A submitted journal on the topic Comparative Study Of Machine Learning Alogrithm For Crop Yield Prediction International Journal Of Scientific Research and Review Volume 7,Issue 3 (2019)pp.288-294.”
2016-17Rishab Bafna S Rithish S and Sai Aravindhan C P of III CSE C submitted journal on the topic “IOT Smart Reading” International Journal of Advanced Engineering And Science Vol 1 ,Issue 3(2016)pp.147-149.
Sanjeev Kumar D Sathiyaseelan T and Saravana Kumar P S of III CSE C submitted journal on the topic “An Analysis on Multihop Wireless Networks” International Journal of Advanced And Innovative Research Vol 5 ,Issue 8(2016)pp.71-76.
Sriram Bharani S Saranya N and Tissin T of IV CSE C submitted journal on the topic “Detecting and Eliminating Grey Hole Attack in Delay Tolerant Network” Imperial Journal of Interdisciplinary Research Vol 2,Issue 12(2016)pp.1-4.
Abhinaya R David Rajkumar S and Govarthini G S of IV CSE A submitted journal on the topic “Survey on Connecting Social Media to E-Commerce: Cold-Start Product Recommendation Using Microblogging Information” International Journal of Scientific Research in Science, Engineering and Technology Vol 2,Issue 5(2016)pp.477-480.
Anitha K Kaleeswari B and Boopathi G of IV CSE A submitted journal on the topic “Energy Conservation in Automatic Teller Machine Integrated with IVR Technology” Advances in Natural and Applied Sciences Vol 10,Issue 14(2016)pp.167-170.
Kaleeswari B Boopathi G and Anitha K of IV CSE A submitted journal on the topic “Survey on Mining Shortest Path in Directed and Dynamic Graphs” International Journal of Scientific Research in Science, Engineering and Technology Vol 2,Issue 5(2016)pp.431-437.
Divya Sri G Kalaiselvi M and Karthekk K R of IV CSE A submitted journal on the topic “An Efficient Human Authentication Using Multibiometric Approach for High Accuracy in Recognition Rate” International Journal of Scientific Research in Science, Engineering and Technology Vol 2,Issue 5(2016)pp.364-368.
Anu Radha Devi.V.S Chinnadurai.S.U and Janani.K of IV CSE A submitted journal on the topic “Pattern Matching Algorithm for Providing Security and Recuding Power Consumption in Wireless Sensor Network” International Journal for Research in Technological Studies Vol 3,Issue 11(2016)pp.12-14.
Akshara D Gaayathri S and Jeevakanth S P of IV CSE A submitted journal on the topic “Survey on Secure and Energy Efficient Cluster Optimization by using Hierarchical Clustering Technique” International Journal for Research in Technological Studies Vol 3,Issue 11(2016)pp.15-17.
Dharani M Gowtham S and Nirmal Kumar M of IV CSE A submitted journal on the topic “Survey on Crop Yield Prediction Using Agriculture Dataset” International Journal of Advanced and Innovative Research Vol 5,Issue 10(2016)pp.13-16.
Nirmal Kumar M Pooja S and Karunya R of IV CSE B submitted journal on the topic “A Survey on Big data Approach for Sentiment Analysis for Streaming Dataset” International Journal of Engineering Science Invention Research and development Vol 3,Issue 5(2016)pp.276-280.
Priyanka R Srikamalesh S and Sruthi.S of IV CSE B submitted journal on the topic “New Technique To Detect DDoS Attack” International Journal of Software & Hardware Research in Engineering Vol 4,Issue 11(2016)pp.15-20.
Sabitha.S Sandhiya.M and Sri hari.R of IV CSE C submitted journal on the topic “Knowledge Based Resource Provision and Allocation in Cloud Using Auction Method” International Journal of Advanced and Innovative Research Vol 5,Issue 10(2016)pp.117-118.
Soundaryaa.A Sibiya.M and Vishnu siddarth.R of IV CSE C submitted journal on the topic “Cloud Surveillance Using SLAs” International Journal of Advanced and Innovative Research Vol 5,Issue 11(2016)pp.4-6.
Shiva prasanth A Shilpa S and kalyanisankar S of IV CSE C submitted journal on the topic “Automated Testing Tool for Different Coverage Metrics” International Journal of Advanced and Innovative Research Vol 5,Issue 10(2016)pp.120-123.
Dhanabagyam. G Alex Jeeva J. J and Sailesh Krishna.S of IV CSE A submitted journal on the topic “Eliminating Risks in Uploading and Downloading Files from Cloud Using Steganography and Cryptography Techniques” International Journal of Scientific Research in Science, Engineering and Technology Vol 2,Issue 6(2016)pp.79-81.
Sailesh Krishna.S Sujitha.R and Sowmiya.P of IV CSE C submitted journal on the topic “Minimizing Channel Interference in Wireless Networks during Disaster Response Operations” International Journal of Computer Trends and Technology Vol 41,Issue 1(2016)pp.22-25.
S.Kavipriya M.Elsi and Vennila G of III CSE B submitted journal on the topic “Recent Trends and Development In Cloud Computing” International Journal of Advanced Research Methodology in Engineering & Technology Vol 1, Issue 1(2016)pp.93-100.
Vennila G Varshini A and Pavithra.E of III CSE C submitted journal on the topic “Position Update For Geographic Routing in MANET” International Journal of Advanced Research Methodology in Engineering & Technology Vol 1, Issue 1(2016)pp.151-160.
Pavithra.E Keerthana.S and Rahman.B of IV CSE B submitted journal on the topic “Document Retrieval in Cloud” International Journal of Advanced Research Methodology in Engineering and Technology Vol 1, Issue 1(2016)pp.145-150.
Rahman.B Srimanikandan.B and Thenmozhi.S of IV CSE B submitted journal on the topic “Document Retrieval in Cloud” International Journal of Advanced Research Methodology in Engineering and Technology Vol 1, Issue 1(2016)pp.145-150.
Srimanikandan.B Thenmozhi.S and Dhivyabharathi S of IV CSE C submitted journal on the topic “Smart Control of Electronic Appliances and Digital Notice Board Using GSM and Bluetooth” International Research Journal of Engineering and Technology Vol 3,Issue 12(2016)pp.285-290.
Dhivyabharathi S Santhiya B and Gomathi S of II ME CSE submitted journal on the topic “Sybil Attacks in P2P Networks: A Survey” International Journal for Research in Technological Studies Vol 4,Issue 1(2016)pp.6-9.
Santhiya B Gomathi S and Sindhu K of II ME CSE submitted journal on the topic “A Survey on Efficient Routing in VANET” International Journal for Research in Technological Studies Vol 4,Issue 1(2016)pp.10-13.
Gomathi S Sindhu K and Divya S of II ME CSE submitted journal on the topic “Detection of Exposed Terminal Problem in Wireless Networks – A Survey” International Journal for Research in Technological Studies Vol 4,Issue 1(2016)pp.14-17.
Sindhu K Divya S and Gowsalyaa.M of II ME CSE submitted journal on the topic “Disclosure of Malevolent in MANET: A Survey” International Journal for Research in Technological Studies Vol 4,Issue 1(2016)pp.31-34.
YearDetails
2015-2016K.Sanjeev, Mr.Sivanandha Hariprasath.N, Ms.M.Saranya and Ms.G.Sandhya from III ECE has published a Research Paper on, “Design of Area and Speed Efficient Square Root Carry Select Adder using Fast Adders” Internation Journal of Soft Computing and Engineering (IJSCE), Volume 5, Issue 4, pp.129-132, ISSN: 2231-2307 September 2015.
2015-2016I.Thahirabanu, G.Vishnupriya, G.Usha, Vignesh K from III ECE and Ms.A.Anandhi IV ECE has published a Research Paper on, “A Comparative Study : Multiplier Design Using Reversible Gates Logic”, International Journal of Soft Computing and Engineering, Volume 05, Issue 4, pp.129-132, ISSN: 2231-2307 September 2015.
2015-2016N. Sakthi Bavatharani from II ME CS, has published a Research Paper on, “Performance analysis of audio signal detection and jamming” International Research Journal of Engineering and Technology (IRJET), Volume 2, Issue 08, pp 284-289, e-ISSN: 2395-0056, p-ISSN: 2395-0072 Nov 2015.
2015-2016Divya Mathew from II ME CS, has published a Research Paper on, “Design of Dual band microstrip patch antenna for WLAN Application” International Research Journal of Engineering and Technology (IRJET), Volume 2, Issue 08, pp 310-314, e-ISSN: 2395-0056, p-ISSN: 2395-0072 Nov 2015.
2015-2016D.Rajesh from II ECE C has published a Research Paper on,“Linear assembly in ATPG Application in Fast Scan-BIST VLSI Circuits” International Journal of Innovations in Engineering and Technology (IJIET), Volume 06, pp. 101-106, ISSN 2319-1058 March 2016.
2015-2016Gayathri.M and Haripriya.M from III ECE has published a Research Paper on, “A Survey on factors causing power consumption and their reduction techniques of embedded Processors” International Journal of Soft Computing and Engineering (IJSE) , Volume 02, pp. 766-769, ISSN: 2231-2307, April 2016
2016-2017T.Manju, J.Jayadharani, Ms.M.Ilamathi,, Ms.R.L.Jeniba and S.N.Ilakkiya from III ECE has published a Research Paper on,“A Survey on recent trends and applications in embedded systems” International Journal of Applied Research, Volume 02, pp.672-674, ISSN(P): 2349-3968, ISSN (O): 2349-3976 September 2016.
2016-2017Kiruthikapreetha.R, Ms.Mercy.J, Ms.Lawanya.R and Ms.Nashreenbanu.M III ECE has published a Research Paper on, “Analysis of GABOR Filter and Homomorphic Filter in Removing Noises in Ultrasound Kidney Images” International Journal of Electrical and Electronics Engineers (IJEEE) , Volume 08, pp.513-518, ISSN (O): 2321-2047, ISSN (P) : 2321-2307.
2016-2017Vasanth Kumar.S, Saravana Kumar G and Karthic T from IV ECE has published a Research Paper on, “Intelligent Sea Food Management” International Journal of Soft Computing and Engineering(IJSCE), Volume 5,Issue 04, pp.122-135, ISSN: 2231-2307 JAN 2017.
2016-2017S.Naveen, S.Poovitha and R.Prasannavenkatesh from III ECE has published a Research Paper on, “An Efficient VLSI Architecture For 64-Bit Vedic Multiplier” International Journal of Electrical and Electronics Engineers (IJEEE), Volume 9, Issue 01, pp.51-60, ISSN: 2321-2055 JANUARY-JUNE 2017.
2016-2017D.Rajesh from III ECE has published a Research Paper on, “Fast Test Pattern Generator using ATALANTA M 2.0” Asian Journal of Research in Social Sciences and Humanities (ARC), Volume 7, Issue 02, pp:721-722, ISSN: 2249-7315 FEB 2017.
2016-2017V.Aathira from II ME, K.Ambhikavathi, S.Geethiga and R.Havin IV ECE a Research Paper on, “Low Power and High Speed Synchronous Circuits using Transmission Gates” Asian Journal of Research in Social Sciences and Humanities, Volume 7, Issue 02, pp:721-729 ISSN: 2249-7315 FEB 2017.
2016-2017P.Kannan from II ME VLSI DESIGN has published a Research Paper on, “Construction of High Performance Carry Skip Adder By Applying Adiabatic Logic” International Journal of Latest Engineering Research And Applications,Volume 2, Issue 03, ISSN: 2455-7137 March 2017.
2016-2017P.Kannan from II ME VLSI DESIGN has published a Research Paper on, “Design of Multiplier Architecture By Using Multioutput Adder” International Journal of Modern Trends In Engineering And Science, Volume 4, Issue 01, ISSN: 2348-3121 March 2017.
2016-2017V.Singaravelan from II ME VLSI DESIGN has published a Research Paper on, “Construction of High Performance Carry Skip Adder by Applying Adiabatic Logic” International Journal of Latest Engineering Research and Applications, Volume 2, Issue 03, ISSN: 2455-7137, March 2017.
2016-2017G.Vishnupriya, G.Usha and I.Thahirabanu from IV ECE has published a Research Paper on, “IOT Enabled Remote Toxic Gas Monitoring and Controlling System” International Journal of Trends in Engineering and Technology (IJTET), Volume 21,Issue 03, ISSN NO:2349-9303, March 2017.
2016-2017M.Subasree, K.Sanjeev, N.Sivanandahariprasath from IV ECE has published a Research Paper on, “Sewer Gas Scrutinizer” International Journal of Advanced Research and Innovative Ideas in Education (IJARIIE), , Volume 3,Issue 02, pp:3714 -3722, ISSN NO:2395-4396, March 2017.
2016-2017Kiruthikapreetha.R, Mercy.J, Lawanya.R and Nashreenbanu,M from III ECE has published an international journal on “Analysis of GABOR Filter and Homomorphic Filter in Removing Noises in Ultrasound Kidney Images” International Journal of Electrical and Electronics Engineers (IJEEE),Volume 8,Issue 02, pp. 513-524, ISSN Print : 2321-2055, ISSN Online : 2321-2045, March 2017.
2017-2018S.Jeeva, N.Karthikeyan, D.Praveen Kumar, G.Kasai Vishali and B.Kousalya from III B.E ECE has published a Research Paper on, “Design and Implementation of 256-bit Ripple Carry Adder Design”, International Journal of Advance Research in Science and Engineering Volume 6,Issue 10, pp. 1713-1718, ISSN:2319-8354, OCT 2017.
2017-2018V.Narayanan, M.Ram Kumar, S.Praveen, from III B.E ECE has published a Research Paper on, “Design of Carry Look Ahead BCD subtractor for Reversible Logic Applications”, International Journal of Advance Research in Science and Engineering Volume 6,Issue 10 pp. 803-809, ISSN: 2319-8354, OCT 2017.
2017-2018R.Prasannavenkatesh, S.Poovitha, B.Thiruvarasu and C.Prathepa from IV B.E ECE has published a Research Paper on, “Smart License based Vehicle Safety and Security System”, International Journal of Advance Research in Science and Engineering, Volume 6,Issue 10, pp.1213-1219, ISSN: 2319-8354, OCT 2017.
2017-2018M.Mahalakshmi from III B.E ECE has published a Research Paper on, “Survey of VLSI Multipliers”, International Journal of Advance Research in Science and Engineering, Volume 6,Issue 10, pp. 1490-1496, ISSN: 2319-8354, OCT 2017.
2017-2018A.Mohamed Asif, V.Pavithra, and R.Preethi from III B.E ECE has published a Research Paper on, “128 bit Square Root Carry Select Adder”, International Journal of Advance Research in Science and Engineering, Volume 6, Issue 10, pp. 846-851 ISSN: 2319-8354, OCT 2017.
2017-2018S.Radhakrishnan, S.Naveen Kumar, S.Monish Raj from III ECE has published a Research Paper on, “A Power Efficient and Enhanced VLSI Architecture for Vedic Multiplier”, International Journal of Advance Research in Science and Engineering, Volume No.06,Issue No.10 pp. 856-866, ISSN:2319-8354, OCT 2017.
2017-2018S.Pavithra, V.S.Kavya Lekshmi,, S.Mohana Sowmiya, K.Mohammed Arshad from III B.E ECE has published a Research Paper on, “128 bit Square Root Carry Select Adder using Binary to excess –one Converter”, International Journal of Advance Research in Science and Engineering, Volume 6,Issue 10, pp. 829-836 ISSN: 2319-8354, OCT 2017.
2017-2018S.Mirunalini, and U.Nandha Kumar from III B.E ECE has published a Research Paper on, “128 bit Square Root Carry Select Adder using Binary to excess –one Converter”, International Journal of Advance Research in Science and Engineering, Volume 6,Issue 10, pp. 829-836 ISSN: 2319-8354, OCT 2017.
2017-2018V.S.Mohamed Riyas Deen, C.R.Kishore, K.Maheswaran and V.Meganathan from III B.E ECE has published a Research Paper on, “Synthesis of Sequential Circuits by Reversible Logic”, International Journal of Advance Research in Science and Engineering, Volume No.06,Issue No.10 pp. 901-909, ISSN:2319-8354, OCT 2017.
2017-2018Mahalakshmi.S, Kalai Muthu.J and Krishnaveni.S from III B.E ECE has published a Research Paper on, “Low power Design of Carry Skip BCD Subtractor by using BCD Adder”, International Journal of Advance Research in Science and Engineering, Volume 6, Issue 10, pp. 1113-1118, ISSN: 2319-8354, OCT 2017.
2017-2018Kevin Curran.S, Monali.G, Monisha Shekar and Shasaang.R from IV B.E ECE has published a Research Paper on, “Smart home Automated Emulator”, International Journal of Scientific Research in Computer Science, Engineering and Information Technology, Volume No.2,Issue No.5 pp. 983-989 ISSN:2456-3307, OCT 2017.
2017-2018S.Naveen, K.Pavithra, of IV B.E ECE has published a Research Paper on, “Reduction of the Paper Effect in OFDM Systems using Selective Mapping Technique”, International Journal of Advanced Research Volume No.5,Issue No.10 pp. 1411-1415 ISSN:2456-3307, OCT 2017.
2017-2018R.Haripriya, S.Dharini and C.Arun Prabha from IV ECE has published a paper on “IOT Based Indoor Air Pollution Monitoring using Raspberry PI”, The International Journal of Innovations in Engineering and Technology (IJIET) Volume No.9, Issue No.2 pp 16-21, ISSN: 2319-1058, DEC 2017.
2017-2018E.M.Alaghusooriya, K.Anitha, C.R.Anjana and V.Hari narayanan from IV ECE has published a Research Paper on, “Trust Mechanism Protocol for Automatic Smart Irrigation System”, International Journal of Advances in Scientific Research and Engineering Volume No.3, Issue No.11 pp 87-94, and ISSN: 2454 -8006, DEC 2017.
2017-2018V.Nandhini and S.Mithra, from IV ECE has published a Research Paper on, “IOT Based Smart Obtrusion Circumvention in Crop Monitoring, International Journal of Engineering Research in Electronics and Communication Engineering (IJERECE) Volume No.4, Issue No.2 pp 121-125, ISSN: 2394-6849, DEC 2017.
2017-2018V.Nandhini. N.Priya, R.Naveena and S.Mithra from IV ECE has published a Research Paper on, “IOT Based Smart Crop Monitoring in Farm Land”, Imperial Journal of Interdisciplinary (IJIR) Research Volume No.4,Issue No.1 pp 88-92, ISSN: 2454-1362, JAN 2018.
2017-2018A.Viyash, A.Levishankar and R.Madesh from IV ECE has published a Research Paper on, “Virtual Reality Based Industrial Automation”, International Journal of Creative Research Thougths (IJCRT) Volume No.6,Issue No.1 pp 1356-1360, ISSN 2320-2882, JAN 2018.
2017-2018J.Ashwini, S.Anusha, A.Dharshana and E.Dharani from IV ECE has published a Research Paper on, “Bio-metric Voting System using Aadhar card irrespective of location”, International Journal of Creative Research Thougths (IJCRT) Volume No.6,Issue No.1 pp 1356-1360, ISSN 2320-2882, JAN 2018.
2017-2018S.Sai Gokul, P.Shalini, R.Sowmeya and R.Vinuvarsha from IV ECE C has published a Research Paper on, “An Awarding Point Technique in WI-FI Sharing System”, International Journal of Creative Research Thougths (IJCRT) Volume No.6,Issue No.1 pp 1267-1273, ISSN 2320-2882, JAN 2018.
2017-2018S.Kavya, S.Manoj, M.Magendran and P.Naveen from IV ECE has published a Research Paper on, “Automatic Error Detection System in Wire Printing using Raspberry Pi”, International Journal of Creative Research Thougths (IJCRT) Volume No.6,Issue No.1 pp 1471-1475, ISSN 2320-2882, JAN 2018.
2017-2018D.Anitha Esther Annabai, E.Hemalatha and C.Divya from IV ECE has published a Research Paper on, “Study of Performance of Dynamic Carry Skip Adder using 22nm Strained Silicon CMOS Technology”, The International Journal of Innovative Science and Research Technology (IJISRT) Volume No.3,Issue No.1 pp 154-158, ISSN 2456-2165, JAN 2018.
2017-2018U.Kripanya, M.Monish, S.Nivetha and H.Prabanjan from IV ECE has published a Research Paper on, “Cartable Camera based Assistive Text Recognition for Visually Impaired”, The International Journal of Innovative Science and Research Technology (IJISRT) Volume No.3,Issue No.1 pp 154-158, ISSN 2456-2165, JAN 2018.
2017-2018A.Amrita from IV ECE has published a Research Paper on, “Low Cost EMI Analyzer using SDR”, International Journal of Modern Trends in Engineering and Science (IJMTES)Volume No.5,Issue No.3 pp 38-39, ISSN 2348-3121, JAN 2018.
2017-2018D.Anitha Esther Annabai, E.Hemalatha and C.Divya from IV ECE has published a Research Paper on, “Performance of Static Carry Skip Adder using 22nm Strained Silicon CMOS Technology”, International Journal of Advanced Research in Science and Technology (IJARST) Volume No.7,Issue No.1 pp 732-735, ISSN 2319-1783, JAN 2018.
2017-2018G.Abilesh Raja, B.Habibullah Khan, B.Jefferson from IV ECE has published a Research Paper on, “A Review of Vehicle to Vehicle communication using Li-Fi Technology”, International Journal of Engineering Research in Electronics and Communication Engineering (IJERECE) Volume No.5,Issue No.1 pp 6-11, ISSN 2394-6849, JAN 2018.
2017-2018V.Nandhini, S.Mithra, R.Naveena and N.Priya from IV ECE has published a paper on “Advanced Crop Monitoring using Internet of Things based Smart Intrusion & prevention in Agricultural Land”, International Journal of Trend in Scientific Research and Development (IJTSRD) Volume No.2,Issue No.2 pp 1348-1352, ISSN 2456-6470, JAN-FEB 2018.
2017-2018N.V.Hari Suriya of IV ECE has published a paper on “Effective Badminton Coaching Schema using PIC16F887 Microcontroller”, International Journal of Trend in Scientific Research and Development (IJTSRD) Volume No.2, Issue No.2 pp 1348-1352, ISSN 2456-6470, JAN-FEB 2018.
2017-2018V.J.Mohan, R.Kiruthiga, M.Priyadharshini and R.Keerthikga of IV ECE has published a Research Paper on, “An Approach for Prioritizing Emergency Vehicle and Efficient Traffic flow”, International Journal of Scientific Research in Computer Science, Engineering and Information Technology Volume No.3,Issue No.1 pp 1325-1329, ISSN 2456-3307, JAN-FEB 2018.
2017-2018V.Karthikeyani, N.Kirubhasudha, S.Kiruthika and T.Monisha from IV ECE has published a paper on “Raspberrry Pi Based Intelligent Autonomous Campus Mobility Services”, International Journal of Trend in Scientific Research and Development (IJTSRD) Volume No.2,Issue No.2 pp 1348-1352, ISSN 2456-6470, JAN-FEB 2018.
2017-2018K.Sanjay of IV ECE C has published a paper on “IoT based Nitrate Measurement and Environment Monitoring System”, The International Journal of Advance Research in Science and Engineering (IJARSE) Volume No.7,Issue No.2 pp 157-168, ISSN 2319-8354, FEB 2018.
2017-2018T.Sandhya, S.Saranya, T.Santhya from IV ECE C has published a Research Paper on, “IoT based Nitrate Measurement and Environment Monitoring System”, The International Journal of Advance Research in Science and Engineering (IJARSE) Volume No.7,Issue No.2 pp 157-168,ISSN 2319-8354, FEB 2018.
2017-2018Ragul.M, P.Srinivasan, K.Ranjithkummar and K.Saisathya from IV ECE has published a Research Paper on, “Implementation of smart plug using Internet of Things”, International Journal of Creative Research Thoughts(IJCRT) Volume No.6,Issue No.1 pp 375-381, ISSN 2319-8354, FEB 2018.
2017-2018P.Santhosh Kumar, S.Saravanan, S.Sivadharini and R.Sophia of IV ECE has published a Research Paper on, “Development of Smart Mirror using Raspberry-pi 3 for Interactive Multimedia”, The International Journal of Advance Research in Science and Engineering (IJARSE) Volume No.7,Issue No.2 pp 929-937, ISSN 2319-8354, FEB 2018.
2017-2018R.Poorani, M.Divya and K.Saravanan of IV ECE has published a Research Paper on, “Development of Non-Refrigerant Air Conditioner using Peltier Thermoelectric Module”, The International Journal of Innovative Research in Science and Technology (IJIRST) Volume No.4,Issue No.10 pp 910-915, ISSN 2349-6010, MARCH 2018.
2017-2018Manojkumar.P, Prathepan.R, Prakash.T and Rupack.V of IV ECE has published a Research Paper on, “EEG Based Brain Controlled Wheel Chair”, International Journal of Creative Research Thoughts (IJCRT) Volume No.6,Issue No.1 pp 633-636, ISSN 23201-2882, MARCH 2018.
2018-2019S.Abinaya, J.Gayathri and S.Giridharan from IV ECE has published a Research Paper on, “Nonvolatile field programmable gate array with high reliability and high intensity using 1D2R RRAM array” International Journal of Advance Research and Development (IJARD) , ,vol.3,no.1,PP.175-188, ISSN:2348-6406, MAY 2018.
2018-2019K.Reena, Rekha P, Sowndharya S and Varsha R from III ECE has published a Research Paper on, “A Novel Sliding Window Image Fusion Approach Employing Dense Scale Invariant Feature Transform (DSIFT)”, International Journal for Research & Development in Technology (IJRDT), ISSN: 2349-3585,vol.9, no.6, PP.120-128, June 2018.
2018-2019S.Shafna, S Shifna, S Samyuktha, M.Saranya and V.Tamilselvi has published a Research Paper on, “Colour Image Segmentation based on Region Growing” International Journal for Research & Development in Technology (IJRDT), ISSN: 2349-3585, vol.10, no.3, PP.60-68, SEP 2018.
2018-2019B. Affrudeen, R.Abinaya from III ECE has published a Research Paper on, “Smart City Implementation Models Based on IoT Technology”, Journal of Emerging Technologies and Innovative Research (JETIR), ISSN: 2349-5162,vol.5, no.9, PP.487-489, SEP 2018.
2018-2019S.Abinaya, D.Hariharan and C.Gowtham from IV ECE has published a Research Paper on, “An Intelligent Human Life Safety System” International Journal of Advance Research and Development (IJARD),ISSN:2349-5162,vol.3,no.1,PP. 104-106,OCT 2018.
2018-2019P.Janaki Raman from IV ECE has published a Research Paper on, “Intelligent Image Detection Methodology with Expectation Maximization Algorithm” International Journal for Research & Development in Technology, (IJRDT) ISSN: 2349-3585, vol.10, no.4, PP.487-489, OCT 2018.
2018-2019S.Pavithra,C.R.kishore and V.Meganathan,from IV ECE has published a Research Paper on, “Radio frequency Identification (RFID) based Smart Trolley for Supermarket” International Research Journal of Engineering and Technology (IRJET), ISSN: 2395-0056, vol.5, no.10, PP.977-979, OCT 2018.
2018-2019S.Mohana Sowmiya, Mirunalini S and Nandha kumar from IV ECE has published a Research Paper on, “Review on Solar Remote Monitoring and Controlling using IoT”, International Research Journal of Engineering and Technology (IRJET), ISSN: 2395-0056, vol.5, no.10, PP.866-868, OCT 2018.
2018-2019A.Mohammed Asif,V.Pavithra and R.Preethi from IV ECE has published a Research Paper on, “Review and Analyse of ground fault circuit Interupter” International Research Journal of Engineering and Technology (IRJET),ISSN: 2395-0056, vol.5, no.10, PP.859-862, OCT 2018.
2018-2019V.S Mohamed Riyas Deen., V.P Murali Krishnan and S.Praveen from IV ECE has published a Research Paper on, “A Survey on RFID and Finger Print Sensor for Vehicle and License Authentication” International Journal for Research & Development in Technology (IJJET),ISSN: 2349-3585, vol.10, no.4, PP.39-42, OCT 2018.
2018-2019A.S.Thaanu Prabha.,M.Sethupathi and V.Vijaysagar from IV ECE has published a Research Paper on, “VLSI Implementation of Eye Detection System”, International Journal of Science Technology and Management (IJSTM), ISSN: 2394-1537, vol.7, no.10, PP.3-10, OCT 2018.
2018-2019V.Krishnan and V.Madhubala, from IV ECE has published a Research Paper on, “Vehicle Theft Detection and Tracking System using Open CV”, International Journal for Research & Development in Technology (IJRDT),ISSN: 2349-3585, vol.10, no.4, PP.134-138, OCT 2018
2018-2019M.Gowtham, T.Haritha and S.Jayalakshmi, from IV ECE has published a Research Paper on, “An Efficient Health care system for Human Anatomy using IoT”, International Research Journal of Engineering and Technology (IJRDT),ISSN: 2395-0056, vol.5, no.10, PP.1-3, OCT 2018.
2019-2020P.Kokila, V.Mohanasundari, V.Priya darsini and S.Rahil Ahmed from IV year ECE Department has published a Research Paper on, “Dispatch Drones”, Journal of Emerging Technologies and Innovative Research (JETIR) Volume 6, Issue 06, ISSN: 2349-5162 June – 2019.
2019-2020B.Nithya, K.Rahul, B.Nivas and V.M.Kishore from III year ECE Department has published a Research Paper on, “Smart bus tracking using GPS and GSM”, Journal of Emerging Technologies and Innovative Research (JETIR) Volume 6, Issue 06, ISSN: 2349-5162 June – 2019
2019-2020S.Madusudan, A.L.Nila, A.Pradeep, A.Pradeep and S.Mani bharathi from IV year ECE Department has published a Research Paper on, “Employee health legacy”, Journal of Emerging Technologies and Innovative Research (JETIR) Volume 6, Issue 06, ISSN: 2349-5162 June – 2019.
2019-2020B.Mahalakshmi, T.Naveenprabu, S.P.Naveen, T.Nagaraj and S.P.Naveen kumar from IV year ECE Department has published a Research Paper on, “Self directing shopper”, Journal of Emerging Technologies and Innovative Research (JETIR) Volume 6, Issue 06, ISSN: 2349-5162 June – 2019.
2019-2020K.Lalitha vanathi, S.Narmadha, S.Narmadha, M.Kiran and J.Praveen kumar from IV year ECE Department has published a Research Paper on, “IOT based monitoring and management system for smart farming”, Journal of Emerging Technologies and Innovative Research (JETIR) Volume 6, Issue 06, ISSN: 2349-5162 June – 2019.
2019-2020V.Priyanga, K.K.Priya darsini, T.Nandini and T.Nikil sriram from IV year ECE Department has published a Research Paper on, “Smart voice controlled robot assistant”, International Research Journal of Engineering and & Technology (IRJET) Volume 6, Issue 10, ISSN: 2395 0056 Volume-6,Issue-10 October – 2019.
2019-2020C.Jagadeesh, M.Kathiresan, M.Mohanraj and S.Janarthanan from IV year ECE Department has published a Research Paper on, “Patient health monitoring with health assistant”, International Research Journal of Engineering and & Technology (IRJET) Volume 6, Issue 10, ISSN: 2395 0056 Volume-6,Issue-10 October – 2019.
2019-2020Indira Devi. K , Indira Kumar , Ishwarya, Jamuna and Gowtham. R from IV year ECE Department has published a Research Paper on, “Monitoring of Health Status and Regulating Patient’s Breathing Practice”, International Research Journal of Engineering and & Technology (IRJET) Volume 6, Issue 10, ISSN: 2395 0056 Volume-6,Issue-10 October – 2019.
2019-2020Atchaya.S, Gayathiri.S Indumathi.B and Hemamalini.M from IV year ECE Department has published a Research Paper on, “Monitoring of Health Status and Regulating Patient’s Breathing Practice”, International Research Journal of Engineering and & Technology (IRJET) Volume 6, Issue 10, ISSN: 2395 0056 Volume-6,Issue-10 October – 2019.
2019-2020Tamilselvi.V, Sribalaji.S, Vigneshwaran.P and Vinu.P from IV year ECE Department has published a Research Paper on, “IOT based health care monitoring system for coma patients”, International Journal of Scientific Research in Engineering And Management(IJSREM) Volume 3, Issue 10, ISSN: 2590-1892 October – 2019.
2019-2020Soumiya.M,, Sowmiya.S, Saran Kumar.V and Yamini.S from IV year ECE Department has published a Research Paper on, “Intravenous fluid level indicator”, International Journal of Scientific Research in Engineering And Management(IJSREM) Volume 3, Issue 10, ISSN: 2590-1892 October – 2019.
2019-2020Samhana.M and Subikshaa.G from IV year ECE Department has published a Research Paper on, “IOT based health care monitoring system for coma patients”, International Journal of Scientific Research in Engineering And Management(IJSREM) Volume 3, Issue 10, ISSN: 2590-1892 October – 2019.
2019-2020Priyanka V, Priydharshini K.K, Nandhini T and Nikil Sriram T from IV year ECE Department has published a Research Paper on, “A Smart Voice Controlled Robot with Vision Journal of Emerging Technologies and Innovative Research (JETIR) Volume 7, Issue 02,pp. : 252-255, ISSN 2349-5162 February 2020
2019-2020B. Affrudeen, R. Abinaya, B. Harish and V. Gunaseelan from IV year ECE Department has published a Research Paper on, “Advancement of the Adjustable and Modest 3D Printed Prosthetic Arm Utilizing Electromyography” International Research Journal of Engineering and Technology (IRJET) Volume 7, Issue 02, e-ISSN: 2395-0056 p-ISSN: 2395-0072 pp. 2753-2755 February 2020
2019-2020Tamilselvi V, Sribalaji S, Vigneswaran P and Vinu P from IV year ECE Department has published a Research Paper on, “A Novel Health Monitoring System for Trance Patients” International Journal for Scientific Research & Development (IJSRD) Volume 7, Issue 12, ISSN (online): 2321-0613 pp. 306-308 February 2020
2019-2020Tamilselvi V, Sribalaji S, Vigneswaran P and Vinu P from IV year ECE Department has published a Research Paper on, “A Novel Health Monitoring System for Trance Patients” International Research Journal of Engineering and Technology (IRJET) Volume 7, Issue 03, e-ISSN: 2395-0056 p-ISSN: 2395-0072 pp. 2753-2755 March 2020
YearDetails
2018-2019M.Mekala of II ME PSE has published a Research Paper on “Research Issues in DFIG Based Wind Energy System” in Electronics Journal on 1 June 2018, Vol 22 (1), pp.40-47
2017-2018Mr.Vignesh B.S IV EEE has published a Research paper in “International journal on Advanced Communication Through Fleshredtacton” International Journal of Engineering Research in Computer Science and Engineering (IJERCSE),Vol 4,Issue 8,August 2017.
Harish R of II ME PSE has published a paper on ” ADAPTIVE FUZZY BASED UPFC CONTROLLER FOR TRANSIENT STABILITY ANALYSIS IN AUTONOMOUS WIND-DIESEL HYBRID SYSTEM” in International Journal of Pure and Applied Mathematics on Feb 2018, Vol 118 (11)pp. 637-645
2016-2017Divya.V of II ME PSE has published a Research paper on “Demand Response of the hybrid system supported vehicle of grid technology” in International Journal of Trend in Research and Development on Feb 2017, Vol 4(1), ISSN: 2394-9333, pp.54-57
Sumithra.S of II ME PSE has published a paper on ” LVRT Improvement of DFIG wind turbine and fault mitigation suing PV Supported DVR” in international Journal of Trend in Research and Development on Feb 2017, Vol 4(1), ISSN: 2394-9333, pp. 58-61
K.Sudhanandhi from II ME PSE has published a Research paper on “Coordinated Control of DFIG System During Unbalanced Grid Voltage Conditions Using Reduced Order Generalized Integrators”, in  Pak. J. Biotechnology, on September 2016, Vol. 13, pp.552-556
R Iswarya of II ME PSE has published a Research paper on “Modelling and Control Design of Three Phase-Four Wire UPQC for Power Quality Improvement”, in Pak. J. Biotechnology on September 2016, Vol 13, pp.474-477
2015-2016Zareena Abdul Wahab of II ME PSE has published a Research paper on “An Intelligent Control and Operation of a Standalone Hybrid Renewable Power System with Energy Management Capabilities”, in International Journal of Applied Engineering Researchy on 2015, Vol 10(41), pp.30567-30579
S.Nilesh of II ME PSE has published a Research paper on “AA Unified Power Management Strategy for a Grid Connected PV Hybrid Energy Storage System”, in  International Journal of Research in Electrical Engineering on January 2016, Vol 3 (1), pp.13-20
Joseph Varghese of II ME PSE has published a Research paper on “ENERGY MANAGEMENT OF A HYBRID POWER SYSTEM BASED ON RENEWABLE ENERGY SOURCES IN DC MICRO GRID”, in  IOIRT 2016.
Godson P Vargese from  II ME PSE has published a Research paper on “Fault Analysis of DFIG based Wind Energy Conversion System”, in International Journal of Innovative Research in Technology, Science & Engineering (IJIRTSE,) on 2016
Manikandan.S from II ME PSE has published a Research paper on “Fault Management in Renewable Energy Resource”, in International Journal of Innovative Research in Technology, Science & Engineering (IJIRTSE) on 2016
Manivannan from II ME PSE has published a Research paper on “Fault Ride-Through Capability Enhancement of DFIG-Based Wind Turbine With a Flux-Coupling-Type SFCL Employed at Different Locations”, in  International Journal of Innovative Research in Technology, Science & Engineering (IJIRTSE) on 2016
Y. Franklin from II ME PSE has published a Research paper on “Active Power Filter For Pv Systems Supplying   Power To Nonlinear Load” in IOIRT on 2016
R.Arulprakash from II ME PSE  has published a Research paper on “Integrated Photovoltaic And Dynamic Voltage Restorer With Nine Switch Power Converter For Power Quality Enhancement”in International Journal of Research in Electrical Engineering, 2016
B.Aswini from II ME PSE  has published a paper on “Wind Farm Condused Primary Load Frequency Control For Multi-Area Power System With Etherizing Load Frequency”in International Journal of Research in Electrical Engineering, 2016, Vol 3(3), pp.10-14.
S.Elayaraja from II ME PSE has published a paper on “A High Step-Up Dc To Dc Converter Control For Fuel Cell Power System Under Aps Control ”in International Journal of Research in Electrical Engineering, 2016, Vol 3 (1), pp.29-34
M.Karthika  from II ME PSE has published a paper on “Digital Control For Power Flow Management In A Pv System Supplying Dc Loads ”in International Journal of Research in Electrical Engineering, 2016, Vol 3 (1), pp.1-6
D.Nithyanandam from II ME PSE has published a Research paper on “Low Frequency Ripple Free Mppt Based Converter For Grid Tied Pv System” in International Journal of Research in Electrical Engineering, 2016, Vol 3 (1), pp.36-41
M.Vignesh from II ME PSE has published a Research paper on “High Gain Voltage  Dc-Dc Converter Based On Three-State Switching Cell For Battery Charging Using Pv System” in International Journal of Research in Electrical Engineering, 2016, Vol 3 (1), pp.21-28
YearDetails
2015-2016N.Karthikeyan of III EIE Published a paper on “Smart Shopping Cart”, in International Journal of Recent and innovation Trends in Computing & Communication, Vol 3 , Issue 10 , October 2015.
P.Nivedhiya, S.Priyangha of IV EIE Published a paper on “Effects of PID Controller to Reduce The Maximum Peak Overshoot Based on Closed Loop Tuning Methods “in International Journal of Applied Engineering Research, Vol. 10 , December 2015.
Venkatesh R, Aravindan V of IV EIE Published a paper on “Detection of Brain tumour using Image Processing Technique in MATLAB” in International Journal of Applied Engineering Research, Vol. 10 No.85 , December 2015.
2016-2017G.Kiruthika, K.Gayathiri, N.Rajkumar published a paper on “Prevention of Manet from Co-Operative Black Hole Attacks” in International Journal of Engineering and Computer Science,ISSN:2319-7242Vol 5 Issue 8,August 2016.
N.Karthikeyan, R.Bhuvaneswari of IV EIE published a paper on “Detection of Fasciculations in Healthy and Diseased Muscle using Ultrasonic” in Journal of Medical and Health Research, September 2016.
C. Raviraj, K. S. Srikanth of III EIE published a paper on “Study Of Face Authentication Using Euclidean And Mahalanobis Distance Classification Method” in International Journal of Modern Trends in Engineering and  Science, ISSN:2348-3121 Vol 04 Issue 02,February 2017.
2017-2018M.Arsath Ariff, C.Raviraj, K.S.Srikanth of IV EIE, published a paper on “Smart Shopping Trolley”, in International Journal for Research in Applied Science &Engineering Technology, ISSN NO:2321-9653,Vol.6,Issue 2,PP-1651-1656, February 2018.
B. Kishore, S. Poorna Chandran, V. Kameshwaran of IV EIE,published on “RFID Based Smart Car Parking System Using IoT” in International Journal on Recent and Innovation Trends in Computing and Communication, ISSN NO. 2321-8169, Vol. 6 Issue 2, PP-27-31, February 2018.
P.R.Praveen, V.Kasiviswanathan, V.Rajagopal, J.Swathi, T.Aravinth, published a paper on “A Survey on IoT Based Smart Grid Technology” in International Journal of Scientific Research and Review, ISSN: 2279-543X, Vol.6, Issue 11, November 2017.
Sanjana Prakash, Sagarika Raj, Vinoth T, Praveen Kumar S published a paper on  “Design and Fabrication of a Pneumatically Operated Wheelchair Ambulated Stretcher”, in International Journal for Research in Applied Science & Engineering Technology ,ISSN:2321-9653,Vol.6, Issue 2, February 2018.
Jibin Mohan,Kesavaraj N,Nandhani T.Vijayalakshmi M published a paper on “Automatic Leaf  Picking Machine ”, in International Journal for Research in Applied Science & Engineering Technology, ISSN:2321-9653,Vol.6, Issue 2,PP- 2535-2540,February 2018.
Geenthanjali C,Nadiya N,Nandhini S,Nivethitha N published a paper on “Railway Track Security System using Raspberry Pi”, in International Journal of Creative Research Thoughts, ISSN:2320-2882,Vol.6,Issue 1,PP-539-542,March 2018.
Anisha A,Sivaranjani S,Vigneshdhi B,Vijayaragavan D published a paper on “A Innovative Method of Automatic Medication Reminder for Old Age People”, in International Journal of Creative Research Thoughts, ISSN:2320-2882,Vol.6,Issue 1,PP-543-545-542,March 2018.
Christy Angel R,Karthick D,Ramesh Kumar G,Suvetha R published a paper on “IoT Based Waste Segregation System with Thingspeak Control”,in International Journal for Research in Applied Science & Engineering Technology, ISSN:2321-9653,Vol.6, Issue 2,PP- 2241-2244,March 2018
Aravinth P,Durgashri R,Saranya S,SarathKumar P published a paper on “A Innovative Approach in the Fieldof Process Control Through Cloud Computation”, International Journal of Creative Research Thoughts, ISSN:2320-2882,Vol.6,Issue 1,PP-543-532-535,February 2018.
2018-2019Mr.I.Dhivakar,Mr.A.Akilkarthi,Mr.A.Sarath Chandar,Mr.J.Dhinesh Kumar, “Smart Agriculture using IoT”, Journal of Emerging Technologies and Innovative Research, ISSN NO:2349-5162,Vol.6,Issue 4,April 2019.
Mr.P.R.Praveen,Mr.M.J.Prasanth,Mr.T.Aravinth,Mr.V.Kasiviswanathan, “Smartfuel Gauge with Intelligent Headlamp Beam Control using Raspberry Pi”, ISSN NO:2349-3585,Vol.11,Issue-3,PP:144-148,March 2019.
2019-2020Aarthi R,Sai Preetha S,Priyadharshini D, “Low Cost Pulse Oximeter”, International Journal of Research and Analytical Reviews, ISSN NO:2349-5138,Vol.6, Issue 1,PP-374-378,February 2019.
YearDetails
2015-2016V.Ashika IV IT, K.Koushika IV IT, D.Kousalya IV IT and S.Vinoth kumar IV IT from IT department has published a Research Paper on ‘Datasync Smartdrive Application using Cloud’ in International Journal of Emerging Technologies in Engineering Research, ISSN:2453-6410,Volume-4, Issue-4, April 2016
2015-2016Meenakshi.M II M.Tech IT from IT department has published a Research Paper on ‘A Novel Image Forgery Detection approach by using scale invariant feature transform’ in International Research Journal of Engineering and Technology, Print ISSN:2395-0072 ,Online ISSN:2395-0056,Volume 2 Issue 7, October 2015
2015-2016Priyanka.B II M.Tech IT from IT department has published a Research Paper on ‘Sentimental data analysis on social media’ in International Journal for scientific research and development, e-Journal volume 3,ISSUE 9, November 2015
2015-2016Shiny S.G II M.Tech IT from IT department has published a Research Paper on ‘Enhancing and automating bill of material’ in International Journal for scientific research and development, e-Journal volume 3,ISSUE 9, November 2015
2015-2016Shankari A.S II M.Tech IT from IT department has published a Research Paper on ‘Enhance novel joint data-hiding and compression scheme based on exemplar approach’, in International Research Journal of Engineering and Technology, Print ISSN:2395-0072 ,Online ISSN:2395-0056,Volume 2 Issue 8, November 2015
2015-2016Ramya.G II M.Tech IT from IT department has published a Research Paper on ‘A Novel method for segmentation of skin lesions from digital images’ , in International Research Journal of Engineering and Technology, Print ISSN:2395-0072 ,Online ISSN:2395-0056,Volume 2 Issue 8, November 2015
2015-2016Vaishnavi .S  II M.Tech IT from IT department has published a Research Paper on ‘Resource allocation and data provisioning for data centers in cloud’, in International Journal for scientific research and development, e-Jornal volume 3,ISSUE 11, January 2016
2015-2016Gowri .P II M.Tech IT from IT department has published a Research Paper on ‘Customer based protocol for information retrieval in cloud computing’, in International Journal of  scientific research in science, engineering and technology, Print ISSN:2395-1990,Online ISSN:2394-4099,Volume 2 Issue 1, February 2016
2015-2016Rajarajeswari S II M.Tech IT from IT department has published a Research Paper on ‘Infrastructure as a service based Data Transfer in cloud server during Disaster’, in International Journal of  scientific research in science, engineering and technology, Print ISSN:2395-1990,Online ISSN:2394-4099,Volume 2 Issue 1, February 2016
2015-2016Divya J II M.Tech IT from IT department has published a Research Paper on ‘Prototype for Enhancing search engine performance using semantic data search’, in International Journal of  scientific research in science, engineering and technology, Print ISSN:2395-1990,Online ISSN:2394-4099,Volume 2 Issue 1, February 2016
2015-2016Roopavani K II M.Tech IT from IT department has published a Research Paper on ‘Improving Networking Life Time with energy efficient radical algorithms in MANET’, in Australian journal of basic and applied sciences, Aust.J.Basic & Appl.sci,10(4): Pages 140-149, February 2016
2015-2016Priya M II M.Tech IT from IT department has published a Research Paper on ‘Actor based access control for a centralized cloud server’ , in International Journal of advanced research in biology engineering science and technology, Print ISSN:2395-695X,Online ISSN:2395-695X,Volume 2 Issue 3, March 2016
2016-2017Dinesh Kumar.M, Nagaraj.V III IT from IT department has published a Research Paper on  ‘Analysis of cloud with LXC Containers and Dockers’ in International Journal for Innovative Research in Science and Technology, ISSN:2349-6010, March 2017
2016-2017DhanaShree.A, Lekshmi.C.M, Akila.M, Janani.P  IV IT from IT department  has published a Research Paper on  ‘E-Recruitment Process’ in International Journal for Innovative Research in Science and Technology, ISSN:2349-6010, March 2017
2016-2017VasanthaKumar.M of IV IT  from IT department has published a Research Paper on  ‘Smart voting using UIDAI’ in International Journal for Innovative Research in Science and Technology, ISSN:2349-6010, March 2017
2016-2017Manjula.T, Pavithra.R, Santhosi.A  IV IT from IT department has published a Research Paper on  ‘Computer aided emergency service system’ in International Journal for Innovative Research in Science and Technology, ISSN:2349-6010, March 2017
2016-2017ArunKumar.R. Boominathan.V, Logesh.M, Mohan raj.S  IV IT from IT department has published a Research Paper on  ‘Secured Media Access’ in International Journal for Innovative Research in Science and Technology, ISSN:2349-6010, March 2017
2016-2017Anupriya.P, Monica Devi.P  IV IT from IT department has published a Research Paper on  ‘Smart alert-A Web Application for College Faculties’ in  International Journal for Innovative Research in Science and Technology, ISSN:2349-6010, March 2017
2016-2017Ajay Krishna.M, Karventhan.N IV IT from IT department has published a Research Paper on  ‘WiFi Controlled autonomous Robot for Military Applications’ in International Journal for Innovative Research in Science and Technology, ISSN:2349-6010, March 2017
2016-2017Roopakseshadri.A.S, Priyanka.R, Swathi.V, Savitha.B IV IT from IT department has published a Research Paper on  ‘Hubness Based Cluster Boosting in Data Mining’ , in International Journal for Innovative Research in Science and Technology, ISSN:2349-6010, March 2017
2016-2017KirubaNandhini.B, Pandiyan.M, Shobana.V  IV IT from IT department has published a Research Paper on  ‘A Hybrid Parallel Ant Swarm Optimization Algorithm Using Cloud Environment’ in International Journal for Innovative Research in Science and Technology, ISSN:2349-6010, March 2017
2016-2017Ramachandramoorthi.M, Tharun.T  IV IT from IT department has published a Research Paper on  ‘Enhanced K nearest neighbour classification over Encrypted data on cloud’ in International Journal for Innovative Research in Science and Technology, ISSN:2349-6010, March 2017
2016-2017Mahesh Kumar.J, Rathiesh.N, Ashwinipriya.V IV IT from IT department has published a Research Paper on  ‘Student Academic Report for Faculties’, in International Journal for Innovative Research in Science and Technology, ISSN:2349-6010, March 2017
2016-2017Suriya.R, Divyashree.G, Nivetha.S, Ramya.R  IV IT from IT department has published a Research Paper on  ‘Optimizing spatio temporal DRP for WRSNs using heuristic based constraints’ in International Journal for Innovative Research in Science and Technology, ISSN:2349-6010, March 2017
2016-2017Beena.S, Sindhuja.G  IV IT from IT department has published a Research Paper on  ‘Automation of student Registration process for choice based credit system’, in International Journal for Innovative Research in Science and Technology, ISSN:2349-6010, March 2017
2016-2017Paarttipaabhalaji, Rohini.B, Uma.D IV IT from IT department has published a Research Paper on  ‘Online Living Campus Application’ , in International Journal for Innovative Research in Science and Technology, ISSN:2349-6010, March 2017
2016-2017Nivetha.G, TheebakKumar.K  IV IT from IT department has published a Research Paper on ‘Challenges and Opportunity in Internet on Things’ , in International Journal for Innovative Research in Science and Technology, ISSN:2349-6010, March 2017
2016-2017Abarna.C, Samyuktha.P, Tamilselvi.S IV IT from IT department  has published a Research Paper on  ‘Detecting the selfish node in wireless sensor network through collaboration filtering’ , in International Journal for Innovative Research in Science and Technology, ISSN:2349-6010, March 2017
2016-2017Sankarraman.K IV IT from IT department has published a Research Paper on  ‘A Survey on Artificial Intelligence Development on Apple inc’ , in International Journal for Scientific Research Development, ISSN:2321 0613 volume 5 issue, March 2017
2016-2017Sankarraman.K  IV IT from IT department has published a Research Paper on  ‘Research Paper on App Lock System for IOS Using Fingerprint Sensor’ , in International Journal for Scientific Research Development, ISSN:2321 0613 volume 5 issue, March 2017
2017-2018K.Sankararaman, V.Nagaraj, M.Dineshkumar IV IT from IT department has published a Research Paper on  ‘Analysis of cloud with LXC Containers and Dockers’ in International Journal for Innovative Research in Science and Technology, ISSN:2349-6010, Issue11, March 2018
2017-2018P.SumathiChitra, S.Saveetha IV IT from IT department has published a Research Paper on  ‘Cache Based Course Setting Up on Roads’ in International journal for Advanced Research in Computer and Communication Engineering, ISSN:2278-1021, Volume7, Issue 3, March 2018
2017-2018S.Sowbarnica, S.Narendran, N.Sridhar, O.S.Vaishalini IV from IT department has published a Research Paper on  ‘Communicative Web Application’ in International journal of Advanced Research, Ideas and Innovations Technology, ISSN:2454-132X, Volume4, Issue 2,March2018
2017-2018T.Arthipriya, K.Abimanthra IV IT from IT department has published a Research Paper on  ‘Automatic Analyse and Report Generation for Private Cloud Storage’ in International journal of Advanced Research, in Computer and Communication Engineering, ISSN:2278-1021, Volume7, Issue 3, March 2018
2017-2018N.Akash, C.Kaarthikeyan, R.Thrivikraman IV IT from IT department has published a Research Paper on  ‘User Alerting System for vehicle accident detection system’ in International journal of Advanced Research, Ideas and Innovations Technology, ISSN:2454-132X, Volume4, Issue 2, March2018
2017-2018A.Soundarya, P.Sooriya, R.Srilekha IV IT from IT department has published a Research Paper on  ‘A Fast Image Retrieval System’ in International journal for Innovative Research in science & Development, ISSN: 2349-6010, Volume4, Issue 11, April2018
2017-2018R.Sudharsan, R.Radhika, P.Urumanathan IV IT from IT department has published a Research Paper on  ‘Yellow Page for Smart City’ in International journal for Innovative Research in science & Development, ISSN: 2349-6010, Volume4, Issue 11, April2018
2017-2018P.K.Jithin, P.Prasath, M.Vishnuram IV IT from IT department has published a Research Paper on  ‘Tamilnadu Tourism E-Guide’ in International journal for Innovative Research in science & Development, ISSN: 2349-6010, Volume4, Issue 11, April2018
2017-2018S.Pushpalatha, J.Saran, R.Devayani IV IT from IT department has published a Research Paper on  ‘Location Based Task Reminder’ in International journal for Innovative Research in science & Development, ISSN: 2349-6010, Volume4, Issue 11, April2018
2017-2018V.Madhumitha, J.Rino, A.KanimozhiNangai IV IT from IT department has published a Research Paper on  ‘SNS Online Exchange Android Application’ in International journal for Innovative Research in science & Development, ISSN: 2349-6010, Volume4, Issue 11, April2018
2017-2018G.Devayani, S.Sruthi, R.Haripriya IV IT from IT department has published a Research Paper on  ‘Android Based Hospital Finder Application Using Global Positioning System’ in International journal for Innovative Research in science & Development, ISSN: 2349-6010, Volume4, Issue 11, April2018
2018-2019R.A.Surentharan  IV IT from IT department has published a Research Paper on  ‘Target Tracking System’ in Journal of Emerging Technologies and Innovative Research, ISSN 2349-5162, Volume 6 Issue 3, March 2019
2018-2019A.Maheshwaren and R.Prabhakaran IV IT from IT department has published a Research Paper on  ‘Quick Image Retrieval System B59(Web Application)’ in Journal of Emerging Technologies and Innovative Research, ISSN 2349-5162, Volume 6 Issue 3, April 2019
2018-2019P.S.Sidharth IV IT from IT department has published a Research Paper on  ‘Productive Enterprise Resource Planning Using Cloud’ in Journal of Emerging Technologies and Innovative Research, ISSN 2349-5162, Volume 6 Issue 3, April 2019
2018-2019G.Arthi,R.Pavithra and K.Saranya IV IT from IT department has published a Research Paper on  ‘Target Tracking SystemAutomatic Question Paper Generator’ in Journal of Emerging Technologies and Innovative Research, ISSN 2349-5162, Volume 6 Issue 3, March 2019
2018-2019R.Krithika Sowbarnika IV IT from IT department has published a Research Paper on  ‘QR Code Encryption, Location Verification and User Authentication Based Human Resource Management System’ in International Journal for Innovative Research in Science and Technology , ISSN 2349-6010, Volume 5 Issue 11, April 2019
2018-2019D.Anushri IV IT from IT department has published a Research Paper on  ‘Website Development and Search Engine Optimization’ in International Journal of Computer Sciences and Engineering,  ISSN 2347-2693, Vol.7, Issue 2, February 2019
2018-2019K.Harini IV IT from IT department has published a Research Paper on  ‘Hierarchical attribute Based Encryption in Cloud Computing’ in Journal of Applied Science and Computations, ISSN 1076 – 5131, Volume 6 Issue 4, April 2019
2018-2019M.Ponmurugesh, M.Rajashobika, K.Usha IV IT from IT department has published a Research Paper on ‘Automatic Form Filler’ in International Research Journal of Engineering and Technology, ISSN 2395-0072, Volume 06 Issue 01, January 2019
2018-2019V.Vishnu Priya,S.Rohini and M.Brindha IV IT from IT department has published a Research Paper on ‘Active Chat Monitoring and Suspicious Detection over Internet’ in International Research Journal of Engineering and Technology (IRJET), ISSN: 2395-0072, January 2019
2018-2019Mohana Priya S, Pavithra K and Vinothini K  IV IT from IT department has published a Research Paper on ‘Skill Gap Analysis System for Student’ in International Journal of Research and Analytical Reviews, ISSN 2349-5138, Volume 6 Issue 1, March 2019
2019-2020B.Krishnaveni,S.Kavya,S.Aswathy Sunny,M.Saihu Dawood IV IT from IT department has published a Research Paper on ‘Comma Patient Observing System(IoT)’ in International Journal for Science and Advance Research In Technology, Volume 6 Issue 2 ISSN:2395-1052, February 2020
2019-2020N.S.Bhavatharani,S.SeleenaNazlin,G.Pavithra,R.Vengada Prasanna  IV IT from IT department has published a Research Paper on ‘Deep Multiple Learning for Automatic Detection of Diabetic retinopathy in Retinal Images’ in International Journal of Emerging Technology and Innovative Engineering, Volume 6,Issue 02,ISSN:2394-6598, February 2020
2019-2020R.Abinaya, S.DivyaPriya,S.Menaka, M.Sivabalan IV IT from IT department has published a Research Paper on ‘Smart Trash Can’ in International Journal of Engineering and Technology, Volume 07,Issue 02,ISSN:2395-0056, February 2020
2019-2020S.Aravindhan, T.S.Mary Shiny, R.Sree Varshini,V.Hariharan IV IT from IT department has published a Research Paper on ‘A New Method for pixel password: Preventing false detection in networking’ in International Journal of Research and Analytical Reviews, Volume 7,Issue 1,ISSN 2349-5138, February 2020
2019-2020K.Dharani,V.Sarun Vignesh Raj, V.R.Udhaya Kumar,A.Vinoth Kumar IV IT from IT department has published a Research Paper on ‘Smart parking for smart cities’ in International Journal of Research and Analytical Reviews, Volume 7,Issue 1,ISSN 2349-5138, February 2020
2019-2020R.Kowshika,N.Gomathi,S.Gokul Krishnan, Saravanan Gayathri IV IT from IT department has published a Research Paper on ‘Smart City Traveller’ in Journal of Technologies and Innovative Research,  ISSN 2349-5162, Vol.7, Issue 2, February 2020
2019-2020Edward Chelliah Pandian E, P.Keerthana, S.Narmadha Devi, S.Priyanka IV IT from IT department has published a Research Paper on ‘Patient Health Monitoring System using IOT’ in International Journal of Engineering and Technology, ISSN 2395-0056, Volume 7 Issue 3, March 2020
YearDetails
2016-17Eg: Ms.T.S.Anusa IV CSE and Ms.L.B. Annapoorna III CSE from CSE Department has published a Research Paper on ‘Enhance the Performance of Cluster Based Routing Protocol Using DPAL in VANET’ in ICTACT Journal on Communication Technology, December 2019, Volume: 10, Issue: 04 ISSN: 2229-6948(online) DOI: 10.21917/ijct.2019.0305, pp 2073-2078.
2018-19Benat Vadhani.D and Nithya, “Students Perception and Attitude towards selection of Colleges in Tamilnadu”, International Journal of Marketing, Financial Services & Management Research, Vol 7, Issue 7, ISSN (O): 2277-3622, July 2018.
2018-19Latha.V and Manisha.G, “Engineering Education in India: A case study”, International Journal of Marketing, Financial Services & Management Research, Vol 7, Issue 6, ISSN (O): 2277-3622, June 2018
2019-20J. S.Newra, T.Monisha, D. Naveen kumar and S. Praneet  sankar, published a research paper titled “Work life Balance of Female Nurses” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 111-118.
2019-20A. Siddharth, A. A. Mohammed Fazil, K. Vignesh kumar and S. Sanjeev, published a research paper titled “Work-life Balance among Women Enterpreneurs” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 232-239
2019-20B. Rahul, V. Muthu karuppan, B. Parameshwaran and R. Vishalini, published a research paper titled “Work Life Balance on Women Teacher” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 202-215
2019-20K. Saranya, S. S. Sachin and M. A. Praveen, published a research paper titled “Work Life Balance of Police in India” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 246-253
2019-20K. Rajalakshmi, R. Rohit prabhu, V. Saanthini and G. Sunantha, published a research paper titled “Work Life Balance for Women in Various Sectors” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 263-272
2019-20M.MartinDeepak, R.Santhiyasri, M.A.Priyadharsini and S.Robin, published a research paper titled “Work Life Balance of Female Teachers” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 292-299
2019-20M.Amrutha, K.M. Deepak Kumar, S. Kiruthika and B.Logeshwaran, published a research paper titled “Work Life Balance of Men in India” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 223-231
2019-20R. Aravinth, S. Dharani and Ann Shalom Sherlin, published a research paper titled “Work Life Balance of Women in India” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 28-37
2019-20Charan. S, Dharanidharan. R, Kalaiselvam. G and Dinesh. G, published a research paper titled “Work Life Balance of Google” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 185-193
2019-20Gokulavani. M, Devipriya.S and Kiruthika.S, published a research paper titled “Women Construction Industry: A Work Life Balance Perspective” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 178-184
2019-20A.Hariharan, A. Felix, A.Athiruban and D.Dinesh Kannan, published a research paper titled “Work Life Balance of IT and ITES Industries of India” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 152-165
2019-20Karthick. L, Jasper Shiran. S and Harish. C, published a research paper titled “Work Life Balance on Women in Banking Sector” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 119-129
2019-20Franklin Akash.J, Gokul.D, Jeevitha. V and Kalarani. V, published a research paper titled “Work Life Balance for Police Department” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 144-151
2019-20S.Jessy Jenifer, Kanagadharani and Akshaya .R, published a research paper titled “Work Life Balance of Nurses in India” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 216-222
2019-20Keerthana.B, Gokulapriya.C, Gurupriya.V and Lalithraj.M, published a research paper titled “Work Life Balance of Employees in Information Technology (IT) Sector at Chennai” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 93-99
2019-20Kowsalya. P, Ajay. S, Dhivya. R and Lakshmi Raja. S, published a research paper titled “Work Life Balance of Women Working in Education Sector” in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 100-110
2019-20Deepeshwaran.V.S, Kripa. R, Arathi K.P and Girija. A, “Practical problem faced by a HR in work and real life”, in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 130-136
2019-20B. Anitha, R. Divya, S.Divya and S. Janani, “Work life balance of doctors in India”, in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 83-92
2019-20M.Aswini, D.Daffni, I. Eswin Jemima and A. Bose Paulmar, “Work life balance of doctors in India”, in the International Journal of Research in Engineering and Management, Vol 8, 2020, pp: 112-118.
2019-20R. Aravinth, S. Dharani and Ann Shalom Sherlin, “Work life balance of doctors in India”, in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 28-37.
2019-20Arunraj.A, Krishna. T, Chinnasamy. M and Hari Prasanth. K, “Work life balance of doctors in India”, in the International Journal of Research in Engineering and Management, Vol 4, 2020, pp: 273-283.
2019-20V. Sangeethavalli, K. Prakash, M. Ramesh and R. Soundriya, “An overview of Work Life Balance of Employee”, International Journal of Research in Engineering and Managementvol.4, 2020, pp.137-143
2019-20J. Roselin bharathi, N. Muthu Kumar and A. Prasad, “A study on Work Life Balance Among Women Teaching Staff at various Colleges”, International Journal of Research in Engineering and Managementvol.4, 2020, pp.166-177
2019-20T. Mayuri, T. Uma Maheshwari, M. Pramila and N. Soundriya, “Work Life Balance of Police Officers”, International Journal of Research in Engineering and Managementvol.4, 2020, pp.194-201
2019-20P. Praveen, P. Pradeep, A. Santhiya Ajith and K. Vasikaran, “Gender difference in the Perception Of Work Life Balance”, International Journal of Research in Engineering and Managementvol.4, 2020, pp.254-262
2019-20J. Prem, V. Srihari, Suveen Kumar and Vimal, “A study on Quality of Work Life of Employees of Power Sector with Special Reference to working Conditions”, International Journal of Research in Engineering and Managementvol.4, 2020, pp.240-245
2019-20R. Subiksha, R. Sathyapriya, Meenakshi Swetha and A.Yogeshwaran, “Work Life Balance of Policies and Impact Employee’s Job Satisfication and Performance”, Indian Scientific Journal of Research in Engineering and ManagementISSN: 2582-3930
Volume02,2020
2019-20D.Sowmiya, N.Nivetha, S.Yugendiran, S.Logeshwaran and K.SerginRojar, “Work Life Balance for Women in IT Sector”, International Journal of Research in Engineering and Managementvol.4, 2020, pp.284-291
2019-20M. Shanmuha Varadhan, D. Raghavendra, Sonal V Nair and R. NagaVishnu, “Work Life Balance of Female Social Worker”, International Journal of Research in Engineering and Managementvol.4, 2020, pp.307-318
2019-20S. Thangaraj, P.Santhosh and V. Srihari, “Work Life Balance of Women Employees in Banking Sector”, International Journal of Research in Engineering and Managementvol.4, 2020, pp.319-334
2020-21Gurupriya.V, Daffni.D, Aswini.M and Sachin.S.S, “An empirical study to assess the market potential for personalized online
cloth shop for women”, International Journal of Scientific Research in Engineering and Management, Vol. 4, Issue 4, ISSN: 2582 3930, pp: 1-5, August 2020.
YearDetails
2016-17Eg: Ms.T.S.Anusa IV CSE and Ms.L.B. Annapoorna III CSE from CSE Department has published a Research Paper on ‘Enhance the Performance of Cluster Based Routing Protocol Using DPAL in VANET’ in ICTACT Journal on Communication Technology, December 2019, Volume: 10, Issue: 04 ISSN: 2229-6948(online) DOI: 10.21917/ijct.2019.0305, pp 2073-2078.
2016-17K.Sivaguru and S.Deepak from III MCT Department has published a Research Paper on “Continuous Blood Glucose Monitoring using Non Invasive Technique – A Review” in Internation Research Journal of Advanced Engineering and Science (IRJAES), 2016, Volume 01, Issue 4, ISSN: 2455-9024, pp. 142-147.
2017-2018P.Ajithkumar and A.Arvind “ A Study Of Continuous Blood Glucose monitoring Using Non Invasive Technique” International Journal of Research in Mechanical Engineering (IJRME), 2016, Volume 03 Issue 01, ISSN No:  2349-3860  Page no: 49-54.
2017-2018Prachi singh, B.Vinothini, V.Padmaja and E.Dharanitharan from IV MCT Department haspublished a Research paper on “Electricity Generation from Bio-Waste” in International Journal of Modern Trends in Engineering and Science (IJMTES), 2017, Volume 04, Issue 05, ISSN: 2348-3121, PP. 96-99
2017-2018A.Vijaykrishnaraj III MCT and S.Deepak IV MCT from MCT Department has published a Research paper on “Robust Stabilization of Dynamical System” in International Journal of Advancement in Engineering Technology, Management and Applied Science (IJAETMAS), 2017, Volume 04, Issue 08, ISSN: 2349-3224, PP. 49-57
2017-2018V.Prakashraj, Y.Gokulnath, R.Paulraj, T.Govarthan from IV MCT Department has published a reasearch paper on “Design and Implementation of Automated Domestic Water Supply using PLC and GSM”, in International Journal of Modern Trends in Engineering and Science (IJMTES), 2017, Volume 04, Issue 04.
2017-2018K.Sivaguru, V.Sasikumar, J.Yogaraj, R.Yuvaraj from IV MCT Department has published a paper on “Electromagnetic Metal Collecting AGV”, in International Research Journal of Advanced Engineering and Science, 2017, Volume 02, Issue 02.
2018-2019Gokul, Prasanth, Santhosh Kumar, Thirunthayan from IV MCT Department has published a research paper on “Design and Performance Evolution of AQUA Silencer”, in International Research Journal of Engineering and Technology, 2018, vol. 5, Issue 1, ISSN: 2395-0056, pp-95-98.
2018-2019S.Karthick, Prince Roy, V.Harikrishnan, D.Bennaiah from IV MCT Department has published a research paper on “IoT based Classroom Automation using Arduino ” in International Journal of Trend in Scientific Research and Development, 2018, vol. 2, Issue 2, ISSN: 2456-6470, pp-306-313.
2018-2019V.Anand, R.Harish Kumar, R.Ragu from IV MCT Department has published a research paper on “Design and Fabrication of Sentry Gun based on Mechatronics System” in International Journal of Trend in Scientific Research and Development, 2018, vol. 2, Issue 2, ISSN: 2456-6470, pp-499-505.
2018-2019B.Srinidhi, R.Gowtham, K.Kishore Kumar, S.Sabari from IV MCT has published aresearch paper on “A Comparison of Different Automation Techniques used in Agricultural field to Automate the Irrigation and Other Process” in International Journal of RecentTrend in Engineering and Research, 2018, vol. 4, Issue 1, ISSN: 2455-1457, pp-146-149.
2018-2019M.Pragathi, M.Ranjith from III MCT Department has published a research paper on “Smart Helmet with Accident Avoidance System” in International Journal of Innovative Research Explorer, 2018, vol. 5, Issue 1, ISSN:2347-6060, pp-73-79.
2018-2019T.Rajeswaran, B.Sunil from III MCT Department has published a research paper on “Intelligent Control of Electronic Appliances using Remote GSM” in International Research Journal of Engineering and Technology, 2018, vol.5 , Issue 1, ISSN: 2395-0056, pp-776-780.
2018-2019R.Manimaran, T.Rajeswaran, S.Surjith Bharathi from III MCT Department has published a research paper on “Induction Motor Fault Diagnosis using Fuzzy System”, International Research Journal of Engineering and Technology, 2018, vol. 5, Issue 1, ISSN: 2395-0056, pp-1498-1502.
2019-2020Manikandan R, Kalaiselvi.P, Gangatharan.S, Sinduja.R and Chandru.T “Ultrasonic liquid level detector using Microcontroller”, International research journal on advanced science hub, Vol.2, issue 4, 2020
YearDetails
2016-2017Dhayanandh N, IV Mech has published a paper on “Analysis of Mechanical Characteristics of Aluminium Nano Composites Using MWCNT” International Research journal of Engineering and Technology, Oct 2016,Vol 03, PP NO 236-240, ISSN: 2395-0072.
Senthilnathan M,  IV Mech has published a paper on “Design of Automatic Car Mat Cleaning Machine” International Research journal of Engineering and Technology, Oct 2016,ISSN: 2278-0181, Vol 05, PP NO 310-315
Tharoon T, IV Mech has published a paper on “The Assessment of Delamination in the Drilling ofEN8 Steel by using Taguchi Method” International Research journal of Engineering and Technology, Oct 2016,Vol 03, PP NO 236-240, ISSN: 2395-0072.
Ram Kumar S, Karthick B / II M.E Thermal presented a paper titled “Performance and Emission characteristic studies of Diesel Engine Fuelled with Neem Oil  ” in International Journal of Mechanical Engineering and Research,, ISSN 0973-4562 Vol. 5 No.1 (2015)
Karthick B/ II M.E Thermal presented a paper titled “Computational study of fins by modifying its structure and area of heat transfer using Ansys” in International Journal of Modern Trends in Engineering and Science,ISSN: 2348-3121.
Prem Kumar R, Praveen Kumar B.R/ II M.E Thermal presented a paper titled “Investigation of static and dynamic behavior of stiffened panels” in International Journal of Scientific Engineering and Research,ISSN: 2437-3878.
Mohan.K, Sathya samy.C/ II M.E Thermalpresented a paper titled “Efficiency improvement in shell and tube heat exchanger using CFD Tool” in International journal of innovative research in science, engineering & technology, Vol 5, Issue 3, March 2016, ISSN : 2319-875.
R.VijayAravind, M.Sriraman of IV year presented a paper titled “Design and Fabrication of Quick Lifting Jack with Bevel Gear Arrangement” in International Journal of Applied Engineering Research, Volume: 10, p.No:397-405.
R.VijayAravind, of IV year presented a paper titled “Vision Based Intelligent Mobile Robot For Face Recognition And Obstacle Avoidance Using Neural Networks And Genetic Algorithm” in International Journal On Engineering Technology and Sciences, Vol 1, pp.19.
2017-18Sangesh R, IV Mech C has published a paper on “Performance analysis of cell and tube heat exchanger using wave strips”, International Journal of innovative research explorer, Volume 5 ,Issue 3, pp:121-129, ISSN:2347- 6060, March 2018.
Vigneshram R, IV Mech C has published a paper on “Performance analysis of cell and tube heat exchanger using wave strips”, International Journal of innovative research explorer, Volume 5 ,Issue 3, pp:121-129, ISSN:2347- 6060, March 2018.
Sreevalsan NM, IV Mech C has published a paper on “Performance analysis of cell and tube heat exchanger using wave strips”, International Journal of innovative research explorer, Volume 5 ,Issue 3, pp:121-129, ISSN:2347- 6060, March 2018.
Rayan A, IV Mech C has published a paper on “Performance analysis of cell and tube heat exchanger using wave strips”, International Journal of innovative research explorer, Volume 5 ,Issue 3, pp:121-129, ISSN:2347- 6060, March 2018.
Sowmiyabhakavathe N, IV Mech C has published a paper on “Theoretical study of flow measuring device”, International Journal of innovative research explorer, Volume 5 ,Issue 3, pp:225-233, ISSN:2347- 6060, March 2018.
Vaishnavi K, IV Mech C has published a paper on “Theoretical study of flow measuring device”, International Journal of innovative research explorer, Volume 5 ,Issue 3, pp: 225-233, ISSN:2347- 6060, March 2018.
Vennila A, IV Mech C has published a paper on “Theoretical study of flow measuring device”, International Journal of innovative research explorer, Volume 5 ,Issue 3, pp: 225-233, ISSN:2347- 6060, March 2018.
Sabaridh S, IV Mech C has published a paper on “Cycle time reduction in CNC turning for submersible pump impeller”, International Journal of innovative research explorer, Volume 5 ,Issue 3, pp:198-203, ISSN:2347- 6060, March 2018.
Ramesh kumar S, IV Mech C has published a paper on “Cycle time reduction in CNC turning for submersible pump impeller”, International Journal of innovative research explorer, Volume 5 ,Issue 3, pp: 198-203, ISSN:2347- 6060, March 2018.
Thilakkumar R, IV Mech C has published a paper on “Cycle time reduction in CNC turning for submersible pump impeller”, International Journal of innovative research explorer, Volume 5 ,Issue 3, pp: 198-203, ISSN:2347- 6060, March 2018.
Sundar R, IV Mech C has published a paper on “Cycle time reduction in CNC turning for submersible pump impeller”, International Journal of innovative research explorer, Volume 5 ,Issue 3, pp: 198-203, ISSN:2347- 6060, March 2018.
Vignesh G, IV Mech C has published a paper on “Increasing the property of H30 aluminium alloy”, International Journal of innovative research explorer, Volume 5 ,Issue 3, pp:161-169, ISSN:2347- 6060, March 2018.
Surendar V, IV Mech C has published a paper on “Increasing the property of H30 aluminium alloy”, International Journal of innovative research explorer, Volume 5 ,Issue 3, pp:161-169, ISSN:2347- 6060, March 2018.
Suprashwandhan P, IV Mech C has published a paper on “Increasing the property of H30 aluminium alloy”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:161-169, ISSN:2347- 6060, March 2018.
Ranjithkumar N, IV Mech C has published a paper on “Increasing the property of H30 aluminium alloy”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:161-169, ISSN:2347- 6060, March 2018.
Ruvanesh R, IV Mech C has published a paper on “Hybrid bike using LPG and electric battery”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:251-256, ISSN:2347- 6060, March 2018.
Sanjay B, IV Mech C has published a paper on “Hybrid bike using LPG and electric battery”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:251-256, ISSN:2347- 6060, March 2018.
Vignesh R, IV Mech C has published a paper on “Hybrid bike using LPG and electric battery”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:251-256, ISSN:2347- 6060, March 2018.
Sriram J, IV Mech C has published a paper on “Hybrid bike using LPG and electric battery”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:251-256, ISSN:2347- 6060, March 2018.
Vasanthakumar C, IV Mech C has published a paper on “Technique to deduct and reduce cracks occurring in welding”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:243-250, ISSN:2347- 6060, March 2018.
Sridharan AR, IV Mech C has published a paper on “Technique to deduct and reduce cracks occurring in welding”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:243-250, ISSN:2347- 6060, March 2018.
Vijay chandran S, IV Mech C has published a paper on “Technique to deduct and reduce cracks occurring in welding”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:243-250, ISSN:2347- 6060, March 2018.
Sreeju R, IV Mech C has published a paper on “Technique to deduct and reduce cracks occurring in welding”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:243-250, ISSN:2347- 6060, March 2018.
Ram vignesh R, IV Mech C has published a paper on “Experimental investigation of machining of stainless steel using vegetable based cutting fluid”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:344-351, ISSN:2347- 6060, March 2018.
Sabaris B, IV Mech C has published a paper on “Experimental investigation of machining of stainless steel using vegetable based cutting fluid”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:344-351, ISSN:2347- 6060, March 2018.
Saravanakumar S, IV Mech C has published a paper on “Experimental investigation of machining of stainless steel using vegetable based cutting fluid”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:344-351, ISSN:2347- 6060, March 2018.
Vishnu K, IV Mech C has published a paper on “Experimental investigation of machining of stainless steel using vegetable based cutting fluid”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:344-351, ISSN:2347- 6060, March 2018.
Ramar S, IV Mech C has published a paper on “Experimental investigation of machining of stainless steel using dry and gas cooled environment”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:334-343, ISSN:2347- 6060, March 2018.
Ramesh pranay, IV Mech C has published a paper on “Experimental investigation of machining of stainless steel using dry and gas cooled environment”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:334-343, ISSN:2347- 6060, March 2018.
Revnath R, IV Mech C has published a paper on “Experimental investigation of machining of stainless steel using dry and gas cooled environment”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:334-343, ISSN:2347- 6060, March 2018.
Sakthivel B, IV Mech C has published a paper on “Experimental investigation of machining of stainless steel using dry and gas cooled environment”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:334-343, ISSN:2347- 6060, March 2018.
Vijay R, IV Mech C has published a paper on “Vibration analysis and on road testing of hybrid mono composite leaf spring for light commercial vehicles”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:135-140, ISSN:2347- 6060, March 2018.
Vishnu T, IV Mech C has published a paper on “Vibration analysis and on road testing of hybrid mono composite leaf spring for light commercial vehicles”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:135-140, ISSN:2347- 6060, March 2018.
Vishnuvardhan M, IV Mech C has published a paper on “Vibration analysis and on road testing of hybrid mono composite leaf spring for light commercial vehicles”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:135-140, ISSN:2347- 6060, March 2018.
Satheesh RN, IV Mech C has published a paper on “Vibration analysis and on road testing of hybrid mono composite leaf spring for light commercial vehicles”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:135-140, ISSN:2347- 6060, March 2018.
Shankaranath P, IV Mech C has published a paper on “Design and analysis of connecting rod by using composite materials”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:273-280, ISSN:2347- 6060, March 2018.
Saravanan K, IV Mech C has published a paper on “Design and analysis of connecting rod by using composite materials”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:273-280, ISSN:2347- 6060, March 2018.
Vigneshwaran C, IV Mech C has published a paper on “Design and analysis of connecting rod by using composite materials”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:273-280, ISSN:2347- 6060, March 2018.
Rajesh Kannan D, IV Mech C has published a paper on “Design and analysis of connecting rod by using composite materials”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:273-280, ISSN:2347- 6060, March 2018.
Thirunesan N, IV Mech C has published a paper on “Analysing the effects on the flow and heat transfer performance in CFMCHE by analytical and numerical solution”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:236-242, ISSN:2347- 6060, March 2018.
Thirumalai R, IV Mech C has published a paper on “Analysing the effects on the flow and heat transfer performance in CFMCHE by analytical and numerical solution”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:236-242, ISSN:2347- 6060, March 2018.
Veeramaniraman N, IV Mech C has published a paper on “Analysing the effects on the flow and heat transfer performance in CFMCHE by analytical and numerical solution”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:236-242, ISSN:2347- 6060, March 2018.
Tamil selvan M, IV Mech C has published a paper on “Analysing the effects on the flow and heat transfer performance in CFMCHE by analytical and numerical solution”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:236-242, ISSN:2347- 6060, March 2018.
SenthilkumarV , IV Mech C has published a paper on “Characterisation of friction stir processed aluminium – magnesium alloy”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:262-272, ISSN:2347- 6060, March 2018.
Vigneshkumar R, IV Mech C has published a paper on “Characterisation of friction stir processed aluminium – magnesium alloy”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:262-272, ISSN:2347- 6060, March 2018.
Vivek S Babu, IV Mech C has published a paper on “Characterisation of friction stir processed aluminium – magnesium alloy”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:262-272, ISSN:2347- 6060, March 2018.
Surya narayanan B, IV Mech C has published a paper on “Characterisation of friction stir processed aluminium – magnesium alloy”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:262-272, ISSN:2347- 6060, March 2018.
Tamil maran SR, IV Mech C has published a paper on “Review on processing of nano tubes”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:215-226, ISSN:2347- 6060, March 2018.
Sugumar G, IV Mech C has published a paper on “Review on processing of nano tubes”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:215-226, ISSN:2347- 6060, March 2018.
Santhoshkumar K, IV Mech C has published a paper on “Review on processing of nano tubes”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:215-226, ISSN:2347- 6060, March 2018.
Saravanan M, IV Mech C has published a paper on “Review on processing of nano tubes”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:215-226, ISSN:2347- 6060, March 2018.
Rubin rakesh V, IV Mech C has published a paper on “Experimental analysis of recent refrigerant R134 A for better cooling effect using a table top fan”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:180-186, ISSN:2347- 6060, March 2018.
Vidhyagar VG, IV Mech C has published a paper on “Experimental analysis of recent refrigerant R134 A for better cooling effect using a table top fan”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:180-186, ISSN:2347- 6060, March 2018.
Saranraj V, IV Mech C has published a paper on “Experimental analysis of recent refrigerant R134 A for better cooling effect using a table top fan”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:180-186, ISSN:2347- 6060, March 2018.
Vigneshkumar K, IV Mech C has published a paper on “Experimental analysis of recent refrigerant R134 A for better cooling effect using a table top fan”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:180-186, ISSN:2347- 6060, March 2018.
Thivakarandavar S, IV Mech C has published a paper on “Exergy analysis of blended refrigerant”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:170-179, ISSN:2347- 6060, March 2018.
Rijoprayson I, IV Mech C has published a paper on “Exergy analysis of blended refrigerant”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:170-179, ISSN:2347- 6060, March 2018.
Thirumaraiselvan, IV Mech C has published a paper on “Exergy analysis of blended refrigerant”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:170-179, ISSN:2347- 6060, March 2018.
Vignesh M, IV Mech C has published a paper on “Exergy analysis of blended refrigerant”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:170-179, ISSN:2347- 6060, March 2018.
Gokul R, IV Mech A has published a paper on “Low cost material handling equipment usiong PLC”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:106-111, ISSN:2347- 6060, March 2018.
Jayakumar P, IV Mech A has published a paper on “Low cost material handling equipment usiong PLC”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:106-111, ISSN:2347- 6060, March 2018.
Karthikeyan G, IV Mech A has published a paper on “Low cost material handling equipment usiong PLC”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:106-111, ISSN:2347- 6060, March 2018.
Ajay karthick K, IV Mech A has published a paper on “Implementation of six sigma tools in automobile service sectors Low cost material handling equipment usiong PLC”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:291-296, ISSN:2347- 6060, March 2018.
Anirudhyan M, IV Mech A has published a paper on “Implementation of six sigma tools in automobile service sectors Low cost material handling equipment usiong PLC”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:291-296, ISSN:2347- 6060, March 2018.
Kadigaimuthu R, IV Mech A has published a paper on “Implementation of six sigma tools in automobile service sectors Low cost material handling equipment usiong PLC”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:291-296, ISSN:2347- 6060, March 2018.
Kathiravan T, IV Mech A has published a paper on “Implementation of six sigma tools in automobile service sectors Low cost material handling equipment usiong PLC”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:291-296, ISSN:2347- 6060, March 2018.
Gokulnaath S, IV Mech A has published a paper on “Review on implementation and barriers affecting 5S methodologies”, International Journal of engineering research and technology, Volume 7 , Issue 3, pp:07-09, ISSN:2278- 0181, March 2018.
Aravindh K, IV Mech A has published a paper on “Review on implementation and barriers affecting 5S methodologies”, International Journal of engineering research and technology, Volume 7 , Issue 3, pp:07-09, ISSN:2278- 0181, March 2018.
Karthick mahadevshivpuje, IV Mech A has published a paper on “Review on implementation and barriers affecting 5S methodologies”, International Journal of engineering research and technology, Volume 7 , Issue 3, pp:07-09, ISSN:2278- 0181, March 2018.
Dinesh kumar G, IV Mech A has published a paper on “Design and fabrication of double braking single lever system for two wheelers”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:130-134, ISSN:2347- 6060, March 2018.
Jayasurya D, IV Mech A has published a paper on “Design and fabrication of double braking single lever system for two wheelers”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:130-134, ISSN:2347- 6060, March 2018.
Jayender R, IV Mech A has published a paper on “Design and fabrication of double braking single lever system for two wheelers”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:130-134, ISSN:2347- 6060, March 2018.
Kavinkumar D, IV Mech A has published a paper on “Design and fabrication of double braking single lever system for two wheelers”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:130-134, ISSN:2347- 6060, March 2018.
Kartheeswaran D, IV Mech A has published a paper on “Causes and remedies of blow holes in sand casting”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:281-284, ISSN:2347- 6060, March 2018.
Gokul N, IV Mech A has published a paper on “Causes and remedies of blow holes in sand casting”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:281-284, ISSN:2347- 6060, March 2018.
Gokul E, IV Mech A has published a paper on “Causes and remedies of blow holes in sand casting”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:281-284, ISSN:2347- 6060, March 2018.
Gurugururaj.M, IV Mech A has published a paper on “Causes and remedies of blow holes in sand casting”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:281-284, ISSN:2347- 6060, March 2018.
Anudev DK, IV Mech A has published a paper on “Review on implementation and barriers affecting Six sigma methodologies”, International Journal of engineering research and technology, Volume 7 , Issue 3, pp:206-208, ISSN:2278- 0181, March 2018.
Ambrishponnappa R, IV Mech A has published a paper on “Review on implementation and barriers affecting Six sigma methodologies”, International Journal of engineering research and technology, Volume 7 , Issue 3, pp:206-208, ISSN:2278- 0181, March 2018.
Dinesh kumar P, IV Mech A has published a paper on “Review on implementation and barriers affecting Six sigma methodologies”, International Journal of engineering research and technology, Volume 7 , Issue 3, pp:206-208, ISSN:2278- 0181, March 2018.
Anbarasan R, IV Mech A has published a paper on “Review on implementation and barriers affecting Six sigma methodologies”, International Journal of engineering research and technology, Volume 7 , Issue 3, pp:206-208, ISSN:2278- 0181, March 2018.
Balakrishnan R, IV Mech A has published a paper on “Implementation of antilock braking system in train”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:304-311, ISSN:2347- 6060, March 2018.
Arunkumar  R, IV Mech A has published a paper on “Implementation of antilock braking system in train”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:304-311, ISSN:2347- 6060, March 2018.
Ganesh kumar S, IV Mech A has published a paper on “Implementation of antilock braking system in train”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:304-311, ISSN:2347- 6060, March 2018.
DivakarA.S , IV Mech A has published a paper on “Experimental implementation ofn recovery boiler for the enhancement of steam production”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:297-303, ISSN:2347- 6060, March 2018.
Gowrishankar V, IV Mech A has published a paper on “Experimental implementation ofn recovery boiler for the enhancement of steam production”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:297-303, ISSN:2347- 6060, March 2018.
Gowthaman S, IV Mech A has published a paper on “Experimental implementation ofn recovery boiler for the enhancement of steam production”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:297-303, ISSN:2347- 6060, March 2018.
Jeganathan N, IV Mech A has published a paper on “Experimental implementation ofn recovery boiler for the enhancement of steam production”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:297-303, ISSN:2347- 6060, March 2018.
Madhankumar V, IV Mech B has published a paper on “Design and fabrication of automobile seat ventilation”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:187-189, ISSN:2347- 6060, March 2018.
Naveen R, IV Mech B has published a paper on “Design and fabrication of automobile seat ventilation”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:187-189, ISSN:2347- 6060, March 2018.
Muthukumar M, IV Mech B has published a paper on “Design and fabrication of automobile seat ventilation”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:187-189, ISSN:2347- 6060, March 2018.
Prasanth I, IV Mech B has published a paper on “Modelling and analysis of surface roughness on end milling of AL-6061”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:319-324, ISSN:2347- 6060, March 2018.
Praveen K, IV Mech B has published a paper on “Modelling and analysis of surface roughness on end milling of AL-6061”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:319-324, ISSN:2347- 6060, March 2018.
Moulidharan S, IV Mech B has published a paper on “Design and fabrication of secondary cabin cooling system for automobile”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:190-192, ISSN:2347- 6060, March 2018.
Guruprasad  M, IV Mech B has published a paper on “Design and fabrication of secondary cabin cooling system for automobile”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:190-192, ISSN:2347- 6060, March 2018.
Jayakrishnaraj J, IV Mech B has published a paper on “Design and fabrication of secondary cabin cooling system for automobile”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:190-192, ISSN:2347- 6060, March 2018.
Kavin  V, IV Mech B has published a paper on “Design and fabrication of secondary cabin cooling system for automobile”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:190-192, ISSN:2347- 6060, March 2018.
Karthik M, IV Mech B has published a paper on “Inbuilt sunshade car cover”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:147-150, ISSN:2347- 6060, March 2018.
Prasanth  S, IV Mech B has published a paper on “Inbuilt sunshade car cover”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:147-150, ISSN:2347- 6060, March 2018.
Maneyarasu S, IV Mech B has published a paper on “Inbuilt sunshade car cover”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:147-150, ISSN:2347- 6060, March 2018.
Prasanth S, IV Mech B has published a paper on “Inbuilt sunshade car cover”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:147-150, ISSN:2347- 6060, March 2018.
Naveen S, IV Mech B has published a paper on “Multi purpose agriculture six legged robot for seeding and watering”, International Journal of intellectual advancements and research in engineering computations, Volume 6 , Issue 3, pp:800-803, ISSN:2348- 2029, March 2018.
Navaneethan  K, IV Mech B has published a paper on “Multi purpose agriculture six legged robot for seeding and watering”, International Journal of intellectual advancements and research in engineering computations, Volume 6 , Issue 3, pp:800-803, ISSN:2348- 2029, March 2018.
Karthick raja S, IV Mech B has published a paper on “Multi purpose agriculture six legged robot for seeding and watering”, International Journal of intellectual advancements and research in engineering computations, Volume 6 , Issue 3, pp:800-803, ISSN:2348- 2029, March 2018.
Prakash K, IV Mech B has published a paper on “Multi purpose agriculture six legged robot for seeding and watering”, International Journal of intellectual advancements and research in engineering computations, Volume 6 , Issue 3, pp:800-803, ISSN:2348- 2029, March 2018.
Nitish Krishna G, IV Mech B has published a paper on “Optimization of process parameter of turning aluminium 6061 using FEA, RSM and GA”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:211-214, ISSN:2347- 6060, March 2018.
Pradeepsingh B, IV Mech B has published a paper on “Optimization of process parameter of turning aluminium 6061 using FEA, RSM and GA”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:211-214, ISSN:2347- 6060, March 2018.
Nijammaidheen M, IV Mech B has published a paper on “Optimization of process parameter of turning aluminium 6061 using FEA, RSM and GA”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:211-214, ISSN:2347- 6060, March 2018.
Prabhakaran S, IV Mech B has published a paper on “Optimization of process parameter of turning aluminium 6061 using FEA, RSM and GA”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:211-214, ISSN:2347- 6060, March 2018.
Krishnamoorthy A, IV Mech B has published a paper on “Model analysis of aluminium 7068 alloy using end mill cutter”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:329-333, ISSN:2347- 6060, March 2018.
Prasanth R, IV Mech B has published a paper on “Model analysis of aluminium 7068 alloy using end mill cutter”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:329-333, ISSN:2347- 6060, March 2018.
Milen S geever, IV Mech B has published a paper on “Model analysis of aluminium 7068 alloy using end mill cutter”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:329-333, ISSN:2347- 6060, March 2018.
Murugan V, IV Mech B has published a paper on “Model analysis of aluminium 7068 alloy using end mill cutter”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:329-333, ISSN:2347- 6060, March 2018.
Kirankumar S, IV Mech B has published a paper on “Design and fabrication of intelligent footboard accident prevention system”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:204-210, ISSN:2347- 6060, March 2018.
Logeshbabu M, IV Mech B has published a paper on “Design and fabrication of intelligent footboard accident prevention system”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:204-210, ISSN:2347- 6060, March 2018.
Mohammed Ibrahim S, IV Mech B has published a paper on “Design and fabrication of intelligent footboard accident prevention system”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:204-210, ISSN:2347- 6060, March 2018.
Nandhakumar S, IV Mech B has published a paper on “Design and fabrication of intelligent footboard accident prevention system”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:204-210, ISSN:2347- 6060, March 2018.
Pavinkumar S, IV Mech B has published a paper on “Performance and analysis of solar still with evacuvated tube”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:151-154, ISSN:2347- 6060, March 2018.
Praveen kumar T, IV Mech B has published a paper on “Performance and analysis of solar still with evacuvated tube”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:151-154, ISSN:2347- 6060, March 2018.
Premkumar G, IV Mech B has published a paper on “Performance and analysis of solar still with evacuvated tube”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:151-154, ISSN:2347- 6060, March 2018.
Lokesh S, IV Mech B has published a paper on “Cycle time reduction in CNC machine of flywheel component 852”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:257-261, ISSN:2347- 6060, March 2018.
Nishanth N, IV Mech B has published a paper on “Cycle time reduction in CNC machine of flywheel component 852”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:257-261, ISSN:2347- 6060, March 2018.
Patrick J, IV Mech B has published a paper on “Cycle time reduction in CNC machine of flywheel component 852”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:257-261, ISSN:2347- 6060, March 2018.
Sarathy B, IV Mech B has published a paper on “Cycle time reduction in CNC machine of flywheel component 852”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:257-261, ISSN:2347- 6060, March 2018.
Onishiponnusamy , IV Mech B has published a paper on “Comparative analysis of bone tissue using rapid prototyping technology”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:319-323, ISSN:2347- 6060, March 2018.
Kumaresan T, IV Mech B has published a paper on “Comparative analysis of bone tissue using rapid prototyping technology”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:319-323, ISSN:2347- 6060, March 2018.
Naveen R, IV Mech B has published a paper on “Comparative analysis of bone tissue using rapid prototyping technology”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:319-323, ISSN:2347- 6060, March 2018.
Mohammed azarudeen S, IV Mech B has published a paper on “Comparative analysis of bone tissue using rapid prototyping technology”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:319-323, ISSN:2347- 6060, March 2018.
Kaushik raja S, IV Mech B has published a paper on “Comparative analysis of bone tissue using rapid prototyping technology”, International Journal of innovative research explorer, Volume 5 , Issue 3, pp:319-323, ISSN:2347- 6060, March 2018.
2018-19 Arjunbabu M R, Bharathkumar U M, Dinesh K S, Gokula Prasath M of  IV Mech A has published a paper on “Lead Time Reduction of Motor control cener by Lean Manufacturing”, International Journal of research,  Vol 08, PP NO 2568-2576, ISSN : 2236-6124, March 2019.
Kumaresan E, Kaviyarasan S  of  IV Mech B has published a paper on “Investigation on EDM of Composite Materials (Al 6068 & Tio2)”, International Journal of research,  Vol 08, PP NO 2682-2686, ISSN : 2236-6124, March 2019.
Sibinath J, Venkatesan M, Thivakaran T, Vinodh B K of  IV Mech C has published a paper on “Time Reduction in Production Management”, International Journal of research Vol 08, PP NO 2721-2728, ISSN : 2236-6124, March 2019.
Sangameswaran U, Sadasivam P, Rajesh L, Thirumalaivasan G  of  IV Mech C has published a paper on “Image Based Vehicle speed Detecting device to avoid accidents in street roads”, International Journal of research Vol 08, PP NO 2568-2576, ISSN : 2236-6124,  March 2019.